MetalWorkerTools/MQL-Injection

Minimum Quantity Lubrication system based on a car fuel injector and a garden sprayer.

Language: C++ - Size: 56.5 MB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0

MetalWorkerTools/CNCL

Lathe grbl teach-in gui

Language: C++ - Size: 6.35 MB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 8 - Forks: 0

MetalWorkerTools/ServoKnob

A PWM controlled RC servo that rotates a potentiometer to CNC control "any" motor

Language: C++ - Size: 1.31 MB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 0 - Forks: 0

MetalWorkerTools/PortalMillingMachine

An easy to build portal milling machine for steel

Size: 260 MB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 1 - Forks: 0

MetalWorkerTools/DC300_RPM_Display

A small Arduino sketch for reading the RPM of some Chinese lathes and mills.

Language: C++ - Size: 54.7 KB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 0 - Forks: 0

MetalWorkerTools/LatheOffCenterCalculator

Free App for calculating dimensions of spacer(s) needed for off center turning on a lathe. One spacer, two spacers or a "flat"can be selected for calculation.

Size: 213 KB - Last synced at: almost 2 years ago - Pushed at: over 4 years ago - Stars: 0 - Forks: 0

MetalWorkerTools/GearCutting

Information for making gear cutters and gears

Size: 1.54 MB - Last synced at: about 2 years ago - Pushed at: about 3 years ago - Stars: 3 - Forks: 2

MetalWorkerTools/grbl-L-Mega Fork of gnea/grbl-Mega

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Mega2560. Forked from GRBL modified for use on a lathe with spindle sync threading

Language: C - Size: 3.7 MB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 12 - Forks: 9

MetalWorkerTools/grbl-L Fork of gnea/grbl

An open source, embedded, high performance g-code-parser written in optimized C that will run on a straight Arduino. Forked from GRBL modified for use on a lathe with spindle sync threading

Language: C - Size: 2.3 MB - Last synced at: about 2 years ago - Pushed at: over 3 years ago - Stars: 10 - Forks: 1

MetalWorkerTools/Grbl_Esp32_R Fork of bdring/Grbl_Esp32

A port of grbl_ESP32 to support CNCR a rotary table GUI for grbl compatible controllers

Language: nesC - Size: 50.4 MB - Last synced at: about 2 years ago - Pushed at: almost 4 years ago - Stars: 0 - Forks: 0

MetalWorkerTools/Shared-Files

Size: 40.8 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 2 - Forks: 1

MetalWorkerTools/CNCR

Rotary table grbl gui

Size: 19.5 KB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

MetalWorkerTools/ESP8266Station

A small sketch to use an ESP8266 as transparant WiFi bridge for connecting serial controllers like Grbl to WiFi.

Language: C++ - Size: 587 KB - Last synced at: about 2 years ago - Pushed at: almost 4 years ago - Stars: 0 - Forks: 0