GitHub / aikopras 6 Repositories
aikopras/AP_DCC_library
Arduino library for (NMRA/RCN) Digital Command Control (DCC) messages. Primarily intended for accessory and function Decoders.
Language: C++ - Size: 1.17 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 14 - Forks: 6
aikopras/AVR-Servo-2
DCC Servo decoder for the AVR64DA28 Servo board, supporting two servos
Language: C++ - Size: 910 KB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 0 - Forks: 0
aikopras/Servo-TCA
Arduino servo library for DxCore processors. Pulses are generated by the TCA timer(s) as PWM. Includes special functions for model train servo's.
Language: C++ - Size: 3.1 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 0 - Forks: 0
aikopras/AP_DCC_Decoder_Core
Core library for DCC accessory decoders that use the RS-Bus for feedback. PoM feedback messages use (instead of RailCom) the RS-Bus with address 128.
Language: C++ - Size: 10.8 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 0 - Forks: 0
aikopras/RSbus
This Arduino library sends feedback information from a decoder to the master station via the (Lenz) RS-bus.
Language: C++ - Size: 4.2 MB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 7 - Forks: 0
aikopras/XpressNet
XpressNet Library (DLL) and example applications. Most XpressNet commands are implemented, as well as sone Z21 commands
Language: Visual Basic 6.0 - Size: 4.12 MB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 0 - Forks: 0
aikopras/TMC-24-Channel-IO-Decoder
24 Channel (SUBD-25 connector) I/O Decoder for DCC Accessory Commands and RS-Bus Feedback. This decoder is used for the Twentse Modelspoorweg Club (TMC)
Language: C++ - Size: 5.59 MB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 0 - Forks: 0
aikopras/Lift_Vitrine
Decoders for the Model train lift
Language: C - Size: 23 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0
aikopras/OPENDECODER22
Decoder for the DCC (Digital Command Control) system with feedback of the actual switch position. via the RS-Bus. It can be used to control 4 switches or 4 relays. It is written in C for the ATMEGA 16A and similar AVRs.
Language: C - Size: 1.15 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0
aikopras/OSX-DCC-Monitor
Monitoring software for DCC and RS-Bus signals. Software runs on MAC OSX
Language: Objective-C - Size: 2.59 MB - Last synced at: almost 2 years ago - Pushed at: almost 5 years ago - Stars: 0 - Forks: 0
aikopras/Programmer-Decoder-POM
Xcode project: MAC software to configure switch decoders
Language: HTML - Size: 3.27 MB - Last synced at: almost 2 years ago - Pushed at: over 3 years ago - Stars: 0 - Forks: 0
aikopras/DCCMonitor
Monitoring hardware to debug potential problems on a DCC digital controlled model train system
Language: C - Size: 838 KB - Last synced at: almost 2 years ago - Pushed at: about 5 years ago - Stars: 0 - Forks: 0
aikopras/Programmer-GBM-POM
Xcode project - MAC software to modify CVs of the OPENDECODER22GBM Occupancy decoder
Language: HTML - Size: 3.66 MB - Last synced at: almost 2 years ago - Pushed at: about 3 years ago - Stars: 0 - Forks: 0
aikopras/OPENDECODER22GBM
Decoder for the DCC system to detect if tracks are occupied. Detection is performed by measuring voltage over a resistor / (high speed) diode. Feedback to the master station uses the RS-Bus
Language: C - Size: 2.04 MB - Last synced at: almost 2 years ago - Pushed at: about 4 years ago - Stars: 1 - Forks: 0
aikopras/library-registry Fork of arduino/library-registry
Arduino Library Manager list
Size: 1.9 MB - Last synced at: almost 2 years ago - Pushed at: over 3 years ago - Stars: 0 - Forks: 0
aikopras/OPENDECODER22RELAYS16
Decoder for the DCC (Digital Command Control) system for 16 relays. It is written in C for the ATMEGA 16A and similar AVRs.
Language: C - Size: 53.7 KB - Last synced at: almost 2 years ago - Pushed at: almost 5 years ago - Stars: 0 - Forks: 0
aikopras/SafetyDecoder
Watchdog / safety decoder for the DCC (Digital Command Control) system with feedback via the RS-Bus.
Language: C++ - Size: 2.75 MB - Last synced at: almost 2 years ago - Pushed at: almost 3 years ago - Stars: 1 - Forks: 0
aikopras/AP_RS485_for_Lift_decoders
Library with common RS485 code for the Lift Decoders
Language: C++ - Size: 5.11 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0