An open API service providing repository metadata for many open source software ecosystems.

GitHub / scottjgibson 38 Repositories

scottjgibson/PixelPi

RGB Pixel Array Driver for the Raspberry Pi

Language: Python - Size: 55.7 KB - Last synced at: over 1 year ago - Pushed at: almost 6 years ago - Stars: 101 - Forks: 41

scottjgibson/RCArduinoFastLib

6 channel RC input for Arduino

Language: C++ - Size: 231 KB - Last synced at: over 2 years ago - Pushed at: over 9 years ago - Stars: 19 - Forks: 16

scottjgibson/ecoPlugTool

A command line tool to control the Home Depot EcoPlug and Woods WION wifi outlets

Size: 13.7 KB - Last synced at: over 2 years ago - Pushed at: over 9 years ago - Stars: 0 - Forks: 0

scottjgibson/esp8266_lamp

Language: C++ - Size: 36.1 KB - Last synced at: over 2 years ago - Pushed at: over 9 years ago - Stars: 0 - Forks: 0

scottjgibson/ArduBot Fork of prussiap/ArduBot

Autonomous arduino robot fully controlled by IR remote control

Language: C++ - Size: 689 KB - Last synced at: over 2 years ago - Pushed at: about 10 years ago - Stars: 0 - Forks: 0

scottjgibson/RGBPongClock Fork of pkourany/RGBPongClock

Adaptation of RGBPongClock for Spark Core including webhooks

Language: C++ - Size: 164 KB - Last synced at: over 2 years ago - Pushed at: over 10 years ago - Stars: 0 - Forks: 0

scottjgibson/LTE-Cell-Scanner Fork of JiaoXianjun/LTE-Cell-Scanner

OpenCL, SDR, TDD/FDD LTE cell scanner, full stack from A/D samples to SIB ASN1 messages decoded in PDSCH, (optimized for RTL-SDR HACKRF and BladeRF board)

Language: C - Size: 972 MB - Last synced at: over 2 years ago - Pushed at: over 10 years ago - Stars: 1 - Forks: 0

scottjgibson/openlte-2 Fork of osh/openlte

Language: C++ - Size: 758 KB - Last synced at: over 2 years ago - Pushed at: about 11 years ago - Stars: 0 - Forks: 0

scottjgibson/star_tracker

Star Tracker code from 0x05 on reddit: http://www.reddit.com/r/astrophotography/comments/1jk0h5/equipment_homebuilt_tracking_mount_up_and_running/

Language: Arduino - Size: 117 KB - Last synced at: over 2 years ago - Pushed at: almost 12 years ago - Stars: 1 - Forks: 0

scottjgibson/rc_remote_switch

Remote controlled switch for RC control

Size: 2.48 MB - Last synced at: over 2 years ago - Pushed at: about 12 years ago - Stars: 1 - Forks: 0

scottjgibson/monochron Fork of CaitSith2/monochron

monochrome clock

Language: C - Size: 6.48 MB - Last synced at: over 2 years ago - Pushed at: over 12 years ago - Stars: 5 - Forks: 2

scottjgibson/babytop

Repurpose an old laptop to a toy for my daughter

Language: Python - Size: 5.38 MB - Last synced at: over 2 years ago - Pushed at: over 12 years ago - Stars: 0 - Forks: 0

scottjgibson/openlte-1 Fork of LucaBongiorni/openlte

http://sourceforge.net/p/openlte/

Language: C++ - Size: 58.6 KB - Last synced at: over 2 years ago - Pushed at: almost 13 years ago - Stars: 2 - Forks: 0

scottjgibson/brewpi-www Fork of BrewPi/brewpi-www

This is the repository for the BrewPi web interface. The web interface will communicate with the Python script you can find in this repository:AVR/Arduino BrewPi slave.

Language: PHP - Size: 257 KB - Last synced at: over 2 years ago - Pushed at: almost 13 years ago - Stars: 0 - Forks: 0

scottjgibson/roomote

A Roomba remote control server to work with the Roomote Iphone App

Language: C - Size: 137 KB - Last synced at: over 2 years ago - Pushed at: almost 14 years ago - Stars: 3 - Forks: 0

scottjgibson/camera-motion-controls

Software to control homebrew camera motion controllers

Size: 93.8 KB - Last synced at: over 2 years ago - Pushed at: over 14 years ago - Stars: 2 - Forks: 0

scottjgibson/thegreatgeekery_hardware

Size: 89.8 KB - Last synced at: over 2 years ago - Pushed at: almost 14 years ago - Stars: 1 - Forks: 0

scottjgibson/RepScrap Fork of michaeljball/RepScrap

DC Motor and Linear Encoder based 3D printer platform

Size: 141 KB - Last synced at: over 2 years ago - Pushed at: about 11 years ago - Stars: 1 - Forks: 0

scottjgibson/TWANG32 Fork of bdring/TWANG32

ESP32 Port of TWANG LED Game

Size: 1.49 MB - Last synced at: over 2 years ago - Pushed at: over 5 years ago - Stars: 0 - Forks: 0

scottjgibson/esp8266Switch

Alternate firmware for EcoPlug embedded wifi switch

Language: Arduino - Size: 1.95 MB - Last synced at: over 2 years ago - Pushed at: over 8 years ago - Stars: 84 - Forks: 35

scottjgibson/rcBabyKart

Arduino based remote control Go Kart

Language: C++ - Size: 219 KB - Last synced at: over 2 years ago - Pushed at: about 11 years ago - Stars: 6 - Forks: 0

scottjgibson/ardumower Fork of Ardumower/ardumower

Develop an open source robotic lawn mower (HW+SW reference platform)

Size: 2.22 GB - Last synced at: over 2 years ago - Pushed at: about 4 years ago - Stars: 0 - Forks: 0

scottjgibson/marvin_mower

Size: 1000 Bytes - Last synced at: over 2 years ago - Pushed at: about 4 years ago - Stars: 0 - Forks: 0

scottjgibson/esp8266

esp8266 reference code

Language: C - Size: 486 KB - Last synced at: over 2 years ago - Pushed at: almost 11 years ago - Stars: 41 - Forks: 24

scottjgibson/lightingPi

OLA Compatible light and prop control framework for the Raspberry Pi

Language: Python - Size: 206 KB - Last synced at: over 2 years ago - Pushed at: almost 12 years ago - Stars: 15 - Forks: 7

scottjgibson/charlie

robot firmware

Size: 13.7 KB - Last synced at: over 2 years ago - Pushed at: almost 5 years ago - Stars: 0 - Forks: 0

scottjgibson/hdpov

Hard Drive Persistance of Vision Clock

Size: 125 KB - Last synced at: over 2 years ago - Pushed at: over 12 years ago - Stars: 1 - Forks: 0

scottjgibson/led_tree

Christmas Project

Language: Arduino - Size: 129 KB - Last synced at: over 2 years ago - Pushed at: over 11 years ago - Stars: 1 - Forks: 0

scottjgibson/CarBatteryTester

Simple arduino AH measurement for 12V batteries.

Language: Arduino - Size: 109 KB - Last synced at: over 2 years ago - Pushed at: about 12 years ago - Stars: 2 - Forks: 0

scottjgibson/christmasLightsArduino

quick RGB LED Controller for my Christmas Lights

Language: Java - Size: 105 KB - Last synced at: over 2 years ago - Pushed at: over 12 years ago - Stars: 1 - Forks: 0

scottjgibson/boombox

Wifi Fireworks Controller

Size: 13.7 KB - Last synced at: over 2 years ago - Pushed at: about 8 years ago - Stars: 0 - Forks: 0

scottjgibson/espurna Fork of solyarisoftware/espurna

Custom firmware for ESP8266 based smart switches

Size: 509 KB - Last synced at: over 2 years ago - Pushed at: over 8 years ago - Stars: 0 - Forks: 0

scottjgibson/homeautomation

Size: 1000 Bytes - Last synced at: over 2 years ago - Pushed at: over 8 years ago - Stars: 0 - Forks: 0

scottjgibson/rcBoat

arduino based controller for my remote control boat; takes standard servo inputs and drives a mosfet for a simple brushed esc

Language: Processing - Size: 160 KB - Last synced at: over 2 years ago - Pushed at: about 12 years ago - Stars: 2 - Forks: 0

scottjgibson/pylutron Fork of thecynic/pylutron

Language: Python - Size: 16.6 KB - Last synced at: over 2 years ago - Pushed at: over 8 years ago - Stars: 2 - Forks: 0

scottjgibson/home-assistant Fork of home-assistant/core

:house_with_garden: Open-source home automation platform running on Python 3

Language: Python - Size: 50.9 MB - Last synced at: over 2 years ago - Pushed at: over 8 years ago - Stars: 1 - Forks: 1

scottjgibson/RoomController

Language: C++ - Size: 17.6 KB - Last synced at: over 2 years ago - Pushed at: over 8 years ago - Stars: 0 - Forks: 0

scottjgibson/dsc_mqtt

DSC Alarm interface to MQTT

Size: 13.7 KB - Last synced at: over 2 years ago - Pushed at: almost 9 years ago - Stars: 1 - Forks: 0

scottjgibson/dcservo Fork of misan/dcservo

Position control of DC motors

Language: Arduino - Size: 41 KB - Last synced at: over 2 years ago - Pushed at: about 9 years ago - Stars: 0 - Forks: 0

scottjgibson/MotionProfileGenerator Fork of WRidder/MotionProfileGenerator

Language: C++ - Size: 403 KB - Last synced at: over 2 years ago - Pushed at: about 9 years ago - Stars: 0 - Forks: 1

scottjgibson/ESP8266-LED-Websockets Fork of wvdv2002/ESP8266-LED-Websockets

ESP8266 RGB+W led strip control, with control website hosted on ESP8266

Language: JavaScript - Size: 470 KB - Last synced at: over 2 years ago - Pushed at: about 9 years ago - Stars: 0 - Forks: 0

scottjgibson/bot1

robot based on johnny-five.io

Size: 13.7 KB - Last synced at: over 2 years ago - Pushed at: about 9 years ago - Stars: 0 - Forks: 0

scottjgibson/OARK-arduino-box

Vagrant setup for the Ardiuno development environment.

Language: Makefile - Size: 125 KB - Last synced at: over 2 years ago - Pushed at: over 10 years ago - Stars: 0 - Forks: 0

scottjgibson/rootooth-low-profile

My implementation of a bluetooth roomba interface. It's very low profile and low cost

Size: 180 KB - Last synced at: over 2 years ago - Pushed at: over 11 years ago - Stars: 1 - Forks: 0

scottjgibson/vim-dotfiles Fork of jperras/dotfiles

Carefully crafted, curated and language-agnostic Vim development environment

Language: VimL - Size: 132 KB - Last synced at: over 2 years ago - Pushed at: over 10 years ago - Stars: 0 - Forks: 0

scottjgibson/4ch_mosfet_switch

4ch logic driven mosfet switch

Size: 375 KB - Last synced at: over 2 years ago - Pushed at: almost 12 years ago - Stars: 1 - Forks: 0

scottjgibson/Adafruit-GFX-Library Fork of adafruit/Adafruit-GFX-Library

Adafruit GFX graphics core library, this is the 'core' class that all our other graphics libraries (will eventually) derive from. Still beta (but working)

Language: C++ - Size: 345 KB - Last synced at: over 2 years ago - Pushed at: almost 11 years ago - Stars: 0 - Forks: 0

scottjgibson/Marlin Fork of MarlinFirmware/Marlin

Reprap FW with look ahead. SDcard and LCD support. It works on Gen6, Ultimaker, RAMPS and Sanguinololu

Language: C - Size: 15.3 MB - Last synced at: over 2 years ago - Pushed at: over 11 years ago - Stars: 0 - Forks: 0

scottjgibson/bobc_hardware Fork of cdsteinkuehler/bobc_hardware

CRAMPS - A Cape version of the RAMPS-FD design for 3D printing

Language: C - Size: 60.5 MB - Last synced at: over 2 years ago - Pushed at: over 10 years ago - Stars: 0 - Forks: 0

scottjgibson/ErgoDox-CNC-Case Fork of fatpeppapig/ErgoDox-CNC-Case

This is my project for ErgoDox case cut using CNC Mill

Size: 441 KB - Last synced at: over 2 years ago - Pushed at: over 11 years ago - Stars: 0 - Forks: 0

scottjgibson/Marlin-1 Fork of RichCattell/Marlin

Marlin Delta firmware with autocalibration updates

Language: C++ - Size: 640 KB - Last synced at: over 2 years ago - Pushed at: about 11 years ago - Stars: 0 - Forks: 0

scottjgibson/trakerLight

Tracker Light

Size: 109 KB - Last synced at: over 2 years ago - Pushed at: over 12 years ago - Stars: 0 - Forks: 0

scottjgibson/raspberrypi_photobooth

Language: Python - Size: 543 KB - Last synced at: 4 days ago - Pushed at: almost 12 years ago - Stars: 0 - Forks: 0

scottjgibson/autoHVAC

Language: Python - Size: 207 KB - Last synced at: over 2 years ago - Pushed at: over 11 years ago - Stars: 0 - Forks: 0

scottjgibson/HomeCoolingPi Fork of flann321/HomeCoolingPi

Whole house fan controller and temperature monitoring powered by the Raspberry Pi

Language: Python - Size: 26.2 MB - Last synced at: over 2 years ago - Pushed at: over 11 years ago - Stars: 0 - Forks: 0

scottjgibson/m-audio_blackbox

Language: C - Size: 109 KB - Last synced at: over 2 years ago - Pushed at: over 12 years ago - Stars: 0 - Forks: 0

scottjgibson/Adafruit-Raspberry-Pi-Python-Code Fork of adafruit/Adafruit-Raspberry-Pi-Python-Code

Adafruit library code for Raspberry Pi

Language: Python - Size: 195 KB - Last synced at: over 2 years ago - Pushed at: over 11 years ago - Stars: 0 - Forks: 0

scottjgibson/5x5_ssr

a 4 channel triac board which fits on a 5cm x 5cm board

Size: 160 KB - Last synced at: over 2 years ago - Pushed at: over 12 years ago - Stars: 0 - Forks: 0

scottjgibson/OpenLTE Fork of neo4reo/OpenLTE

Open Source LTE platform - Aims to be an Open Source Software Defined Radio (SDR) Erlang and C++ implementation of the 3GPP release 10 LTE spec

Language: C++ - Size: 58.6 KB - Last synced at: over 2 years ago - Pushed at: over 13 years ago - Stars: 0 - Forks: 0

scottjgibson/pyobd-ng Fork of nv1t/pyobd-ng

Fixes to pyobd for modern hardware interfaces

Language: Python - Size: 58.6 KB - Last synced at: over 2 years ago - Pushed at: almost 13 years ago - Stars: 0 - Forks: 0

scottjgibson/motorSlaveController

motor driver for DC motors with Quadrature Encoder feedback controlled over serial or I2C

Language: Java - Size: 104 KB - Last synced at: over 2 years ago - Pushed at: over 12 years ago - Stars: 0 - Forks: 1

scottjgibson/arduino_star_tracker

Original stepper motor based star tracker; based on arduino and itead studio dual stepper motor shield; but will work with any stepper drive

Size: 109 KB - Last synced at: over 2 years ago - Pushed at: almost 12 years ago - Stars: 0 - Forks: 3

scottjgibson/PixelController Fork of neophob/PixelController

Matrix control Software, Currently supports LPD6803, Rainbowduinos, ArtNet and miniDMX Output devices.

Language: Java - Size: 16.6 MB - Last synced at: over 2 years ago - Pushed at: almost 13 years ago - Stars: 2 - Forks: 1

scottjgibson/adafruit-raspberrypi-linux Fork of adafruit/adafruit-raspberrypi-linux

Adafruit's hacking-friendly Raspberry Pi linux kernel

Language: C - Size: 545 MB - Last synced at: over 2 years ago - Pushed at: almost 13 years ago - Stars: 0 - Forks: 0

scottjgibson/Parallel-Port-Breakout

Parallel Port Breakout which support 24V IO

Size: 54.7 KB - Last synced at: over 2 years ago - Pushed at: over 12 years ago - Stars: 0 - Forks: 0

scottjgibson/PiBits Fork of richardghirst/PiBits

Language: C - Size: 142 KB - Last synced at: over 2 years ago - Pushed at: over 12 years ago - Stars: 0 - Forks: 0

scottjgibson/brewpi-avr Fork of weaksauce/brewpi-avr

This is the code that runs on the BrewPi slave (AVR/Arduino)

Language: C++ - Size: 125 KB - Last synced at: over 2 years ago - Pushed at: almost 13 years ago - Stars: 0 - Forks: 0

scottjgibson/brewpi-script Fork of BrewPi/brewpi-script

This is the repository for the BrewPi Python script. The python script logs the data, monitors the temperature profile and communicates with the BrewPi slave and the web server

Language: Python - Size: 84 KB - Last synced at: over 2 years ago - Pushed at: almost 13 years ago - Stars: 0 - Forks: 0

scottjgibson/PyPid

PyPid

Size: 46.9 KB - Last synced at: over 2 years ago - Pushed at: almost 13 years ago - Stars: 0 - Forks: 0

scottjgibson/iPod_IBus_adapter Fork of blalor/iPod_IBus_adapter

iPod-to-Sirius adapter for MINIs & BMWs

Language: Java - Size: 1.53 MB - Last synced at: over 2 years ago - Pushed at: almost 14 years ago - Stars: 1 - Forks: 0