Infineon/cce-mtb-xmc44-pmsm-foc-sl-dc

This community code example (CCE) demonstrates the sensorless PMSM FOC motor control application using XMC4400 Drive Card. In order to test this software; XMC4400 Drive Card, 3-phase DC power board, and Nanotec DC motor (DB42S03) are needed.

Language: C - Size: 3.07 MB - Last synced at: 4 months ago - Pushed at: over 1 year ago - Stars: 4 - Forks: 1

Infineon/cce-mtb-mqtt-client-over-lte

This community code example (CCE) demonstrates the implementation of LTE CAT M1 connectivity to PSoC6 via Point-to-Point Protocol (PPP). This CCE demonstrates the steps to add LTE connectivity to any existing Wi-Fi based code example. mtb-example-anycloud-mqtt-client is taken as a reference here. GM01Q_Sequans Module is used for providing LTE connectivity for PSoC6 device. The MQTT Library and lwIP is hosted in PSoC6 and the GM01Q Module communicates to PSoC6 via PPP.

Language: C - Size: 7.18 MB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 2 - Forks: 0

Infineon/cce-mtb-xmc44-usb-otg

This example demonstrates how to set up the Infineon MCU to implement a USB On-The-Go (OTG) that introduces the dual-role device, a device capable of functioning as either host or peripheral. The example uses FreeRTOS.

Language: C - Size: 1.01 MB - Last synced at: 4 months ago - Pushed at: about 1 year ago - Stars: 1 - Forks: 0

Infineon/cce-mtb-psoc6-bt-a2dp-source

This community code example demonstrates streaming audio via Bluetooth Classic A2DP source profile from PSoC6 to external Bluetooth speaker/earbuds.

Language: C - Size: 1.04 MB - Last synced at: 4 months ago - Pushed at: over 1 year ago - Stars: 1 - Forks: 2

Infineon/cce-mtb-xmc-pmsm-foc-sl

This code example demonstrates the sensor-less PMSM FOC motor control application using XMC1300/XMC1400. In order to test this code example, XMC1000 Motor Control Application Kit is needed. This kit includes an XMC1300/XMC1400 board and a PMSM low voltage motor card with a 3-phase motor.

Language: C - Size: 2.8 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 1 - Forks: 0

Infineon/cce-mtb-psoc6-bgt60ltr11-spi-interface

This code example demonstrates how to interface Infineon's S2GO RADAR BGT60LTR11 board with PSoC6™ via SPI using Eclipse IDE for ModusToolbox™. This code demonstrates the procedure to detect target motion and direction, as well as raw internal ADC readings.

Language: C - Size: 116 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 1 - Forks: 1

Infineon/cce-mtb-psoc4-capsense-fss

CapSense Flanking Sensor Suppression in PSoC 4. This code example implements Flanking Sensor Suppression (FSS) in PSoC™ 4 devices. FSS eliminates false touches by distinguishing between signals from closely spaced buttons.

Language: C - Size: 110 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 1 - Forks: 0

Infineon/cce-mtb-psoc61-mcuboot-bootloader

This community code example (CCE) demonstrates the implementation of MCUBoot based bootloader for PSoC™ 61 MCU devices. This CCE is derived from mtb-example-psoc6-mcuboot-basic and PSoC61 support to run both Application and Bootloader from CM4 CPU is added.

Language: Python - Size: 1.28 MB - Last synced at: 4 months ago - Pushed at: 7 months ago - Stars: 0 - Forks: 0

Infineon/cce-mtb-xmc-pmsm-foc-sl-dc

This community code example (CCE) demonstrates the sensorless PMSM FOC motor control application using XMC1300/1400 Drive Card. In order to test this software; XMC1300 or XMC1400 Drive Card, 3-phase DC power board, and Nanotec DC motor (DB42S03) are needed.

Language: C - Size: 2.78 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

Infineon/cce-mtb-psoc6-smbus-slave

This example demonstrates how to implement the SMBus slave on top of an SCB I2C and Timer in PSoC 6.

Language: C - Size: 22.5 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

Infineon/cce-mtb-xmc-bldc-scalar-sl

Language: C - Size: 2.77 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

Infineon/cce-mtb-xmc-bldc-scalar-hall

This community code example (CCE) demonstrates Hall sensor based three phase BLDC motor control application using XMC1300 Boot Kit. In order to test this software, XMC1000 Motor Control Application Kit is needed.

Language: C - Size: 2.92 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

Infineon/cce-mtb-psoc6-ubm-controller

This is a basic code example to showcase the Universal Backplane Management (UBM) middleware features. The code example details how to configure the UBM hardware and illustrates the firmware update using the MCUboot library.

Language: Assembly - Size: 245 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

Infineon/cce-mtb-psoc4-flash-and-chip-protection

Add flash and chip protection settings for psoc4 devices into the hex file

Language: C - Size: 51.8 KB - Last synced at: over 1 year ago - Pushed at: almost 2 years ago - Stars: 0 - Forks: 0

Infineon/cce-mtb-psoc4-i2s

The example demonstrates how the I2S block can be configured to transmit data for PSoC 4100S MAX devices

Language: C - Size: 241 KB - Last synced at: over 1 year ago - Pushed at: almost 2 years ago - Stars: 0 - Forks: 0

Infineon/cce-mtb-psoc4-msc-capsense-guard

CAPSENSE guard sensor in PSoC 4 devices with Multi sense converter (MSC)

Language: C - Size: 4.55 MB - Last synced at: over 1 year ago - Pushed at: almost 2 years ago - Stars: 0 - Forks: 0

Infineon/cce-mtb-psoc6-tcpwm-interrupt

Periodic interrupt generation using timer counter PWM (TCPWM) in continuous up counter mode.

Language: Makefile - Size: 22.5 KB - Last synced at: over 1 year ago - Pushed at: almost 2 years ago - Stars: 0 - Forks: 0

Infineon/cce-mtb-xmc1300-pmsm-foc-sl

This code example demonstrates the sensor-less PMSM FOC motor control application using XMC1300. In order to test this code example, XMC1000 Motor Control Application Kit is needed. This kit includes an XMC1300 board and a PMSM low voltage motor card with a 3-phase motor.

Language: C - Size: 1.07 MB - Last synced at: about 2 years ago - Pushed at: about 2 years ago - Stars: 0 - Forks: 0

Infineon/cce-mtb-psoc6-amux-sar-adc

This code example demonstrates how to extend the number of SAR ADC channels to virtually any available analog pin in the device without much impact on the sampling speed. It is implemented totally in hardware by using the global analog mux, instead of the SAR mux sequencer.

Language: C - Size: 76.2 KB - Last synced at: over 1 year ago - Pushed at: about 2 years ago - Stars: 0 - Forks: 0

Infineon/cce-mtb-psoc4-capsense-pipeline-scanning

This code example demonstrates how to implement pipeline scanning in CapSense to improve performance. When a particular widget is being processed, the next widget in line can be scanned parallelly. This is better than conventional method of scanning all the widgets and then processing the scanned data later altogether thus reducing net scan time.

Language: C - Size: 62.5 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/cce-mtb-psoc6-dps310

This example demonstrates how to interface the Infineon DPS310 pressure sensors evaluation board with PSoC™ 6 on ModusToolbox™. The sensor-xensive-dps3xx library is used in this example project for initializing and reading of temperature and pressure data from the DPS310 Barometric pressure sensor.

Language: C - Size: 146 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/cce-mtb-psoc6-lvd

This code example demonstrates how to configure a PSoC 6™ Low Voltage Block to generate interrupt when the voltage level crosses the set threshold.

Language: C - Size: 22.5 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0