Infineon/mtb-example-hal-hello-world

Demonstrates simple UART communication by printing a "Hello World" message on a terminal and blinks an LED using a Timer resource.

Language: C - Size: 220 KB - Last synced at: 4 months ago - Pushed at: 12 months ago - Stars: 5 - Forks: 14

Infineon/mtb-example-hal-uart-transmit-receive

This example demonstrates the UART (HAL) transmit and receive operation in PSoC 6 MCU.

Language: Makefile - Size: 127 KB - Last synced at: 3 months ago - Pushed at: over 1 year ago - Stars: 4 - Forks: 2

Infineon/mtb-example-psoc6-crypto-aes

This code example encrypts and decrypts user input data using the AES algorithm using a 128-bit key. The encrypted and decrypted data are displayed on a UART terminal emulator.

Language: C - Size: 176 KB - Last synced at: 4 months ago - Pushed at: over 1 year ago - Stars: 2 - Forks: 2

Infineon/mtb-example-empty-app

This empty application provides a template for creating applications using PSoC 6 devices.

Language: Makefile - Size: 122 KB - Last synced at: about 2 months ago - Pushed at: 10 months ago - Stars: 1 - Forks: 2

Infineon/mtb-example-ml-imagimob-deploy

Language: C - Size: 2.04 MB - Last synced at: 5 months ago - Pushed at: about 1 year ago - Stars: 1 - Forks: 1

Infineon/mtb-example-psoc6-crypto-sha

This code example shows how to generate a 32-byte hash value or message digest for an arbitrary user input message with the SHA2 algorithm using the Cryptographic hardware block in PSoC 6 MCU.

Language: C - Size: 158 KB - Last synced at: 6 days ago - Pushed at: over 1 year ago - Stars: 1 - Forks: 1

Infineon/mtb-example-psoc6-low-power-capsense-freertos

This code example demonstrates how to create a low-power CapSense design using PSoC 6 MCU. This example features a 5-segment CapSense slider and a Ganged Sensor, and displays the detected touch position over the serial terminal.

Language: C - Size: 3.85 MB - Last synced at: 3 months ago - Pushed at: 7 months ago - Stars: 0 - Forks: 0

Infineon/mtb-example-hal-adc-basic

This example demonstrates use of the ADC (Analog to Digital Converter) HAL driver to perform voltage measurements.

Language: C - Size: 159 KB - Last synced at: 5 months ago - Pushed at: about 1 year ago - Stars: 0 - Forks: 2

Infineon/mtb-example-hal-lptimer

This application demonstrates how to set up a 32-bit free-running counter using two 16-bit counters of the Multi-Counter Watchdog Timer (MCWDT). The application is implemented using LPTimer HAL APIs , which use a cascade of Counter 0 and Counter 1 in free-running mode.

Language: C - Size: 179 KB - Last synced at: 3 months ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 1

Infineon/mtb-example-hal-pwm-square-wave

This code example generates a square wave using the TCPWM resource configured as a PWM. An LED connected to the PWM output pin blinks at 2 Hz.

Language: C - Size: 156 KB - Last synced at: about 2 months ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 1

Infineon/mtb-example-hal-i2c-master-ezi2c-slave

This example demonstrates the useof I2C (HAL) resource for PSoC6 MCU in Master mode with an EzI2C slave

Language: C - Size: 152 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 1

Infineon/mtb-example-aws-iot-ota-mqtt

This code example demonstrates an OTA update with PSoC™ 6 MCU and AIROC™ CYW43xxx Wi-Fi & Bluetooth® combo chips. This example uses the AWS SDK for Embedded C and AWS IoT Device SDK Port libraries to connect and communicate with the AWS IoT MQTT core.

Language: C - Size: 167 KB - Last synced at: over 1 year ago - Pushed at: about 3 years ago - Stars: 0 - Forks: 1