UncleRus/esp-idf-lib

Component library for ESP32-xx and ESP8266

Language: C - Size: 4.73 MB - Last synced at: 3 days ago - Pushed at: about 1 month ago - Stars: 1,511 - Forks: 461

maarten-pennings/CCS811

Arduino library for the CCS811 gas sensor for monitoring indoor air quality.

Language: C++ - Size: 1.7 MB - Last synced at: over 1 year ago - Pushed at: over 3 years ago - Stars: 159 - Forks: 47

ostaquet/Arduino-MQ131-driver

Arduino driver for gas sensor MQ131 (Ozone / O3)

Language: C++ - Size: 2.41 MB - Last synced at: about 2 years ago - Pushed at: almost 4 years ago - Stars: 57 - Forks: 21

pawelhulek/pgnig-sensor

This sensor is gathering gas usage data from PGNIG ebok page.

Language: Python - Size: 61.5 KB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 30 - Forks: 8

yukulehe/gazpar2mqtt

Python script to fetch GRDF's website data and publish data to a mqtt broker.

Language: Python - Size: 1.86 MB - Last synced at: 5 months ago - Pushed at: about 2 years ago - Stars: 21 - Forks: 9

filips123/GasDetection

Gas detection for Raspberry Pi using ADS1x15 and MQ-2 sensors

Language: Python - Size: 23.4 KB - Last synced at: 9 days ago - Pushed at: over 5 years ago - Stars: 18 - Forks: 10

Infineon/arduino-pas-co2-sensor

Arduino library for Infineon's XENSIV™ Photoacoustic Spectroscopy (PAS) CO2 miniaturized sensor

Language: C - Size: 6.48 MB - Last synced at: 18 days ago - Pushed at: about 1 month ago - Stars: 13 - Forks: 8

Umraz-Hussain-MyWorld/Air-Quality-Monitoring-Project-By-Umraz-Hussain

A IOT based Air Quality Monitoring Project By Umraz Hussain Using Arduino Uno

Language: C++ - Size: 1.05 MB - Last synced at: over 1 year ago - Pushed at: over 4 years ago - Stars: 12 - Forks: 0

sciosense/ens16x-arduino

Arduino library for the ENS16x digital metal-oxide multi-gas sensor family

Language: C - Size: 1.99 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 10 - Forks: 5

AliRezaJoodi/Electronics_Projects

Electronic Projects without MCU

Size: 2.31 MB - Last synced at: 14 days ago - Pushed at: over 2 years ago - Stars: 9 - Forks: 1

Sensirion/arduino-i2c-sfa3x

Arduino library for the SFA3x sensor family.

Language: C++ - Size: 2.44 MB - Last synced at: 18 days ago - Pushed at: about 1 month ago - Stars: 8 - Forks: 1

Seeed-Studio/Seeed_Arduino_MultiGas 📦

This library could be used to detect four different gas concentrations and display them on the terminal.

Language: C++ - Size: 28.3 KB - Last synced at: 19 days ago - Pushed at: 7 months ago - Stars: 8 - Forks: 6

Infineon/pas-co2-sensor

C++ library for Infineon's Photoacoustic Spectroscopy (PAS) XENSIV™ CO2 miniaturized sensor

Language: C++ - Size: 3.48 MB - Last synced at: 18 days ago - Pushed at: 10 months ago - Stars: 8 - Forks: 1

fjebaker/MQ7

Arduino / AVR library for MQ7 carbon monoxide detector.

Language: C++ - Size: 32.2 KB - Last synced at: 1 day ago - Pushed at: over 3 years ago - Stars: 8 - Forks: 6

MKme/Arduino-Gas-Sensor

Hackaday Prize winning Gas Sensor For Emergency Workers using Atmega 328P microcontroller to monitor and transmit dangerous airborne gasses back to the responders radio in human voice

Language: C++ - Size: 3.01 MB - Last synced at: 12 months ago - Pushed at: almost 4 years ago - Stars: 8 - Forks: 6

rockberte/SmartThings

Collection of device handlers and smart applications to be used in Samsung SmartThings.

Language: Groovy - Size: 92.8 KB - Last synced at: over 1 year ago - Pushed at: over 4 years ago - Stars: 8 - Forks: 4

vinojv96/Air_Quality_Thingspeak

Nodemcu Esp8266-12E DHT22 DSM501A MQ7

Language: C++ - Size: 156 KB - Last synced at: about 1 year ago - Pushed at: almost 7 years ago - Stars: 7 - Forks: 3

radhoo/uradmonitor_smoggie

SMOGGIE is an ultra-low cost automated air quality monitor with a rain proof enclosure and a simple mount system to make installation easy.

Language: C++ - Size: 32.2 MB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 6 - Forks: 3

tstoegi/MyMeter

Arduino energy and gas meter monitoring with a Wemos D1 Mini over mqtt

Language: C++ - Size: 558 KB - Last synced at: 29 days ago - Pushed at: about 1 month ago - Stars: 5 - Forks: 0

cepdnaclk/e18-3yp-smart-safety-helmet

Smart safety helmet for large scale construction sites

Language: JavaScript - Size: 13.5 MB - Last synced at: 18 days ago - Pushed at: almost 2 years ago - Stars: 5 - Forks: 4

PriontoAbdullah/IoT-based-Mars-Rover-project-with-6-sensors

🛰️ TAAO Rover-1 for the mission of Mars planet. 🚀 Air sensor, 🌌 water sensor, gas sensor,🌡️ temperature sensor, humidity sensor, 📡 sonar sensor with esp-32 wifi cam. 📷

Language: C++ - Size: 302 KB - Last synced at: about 2 months ago - Pushed at: almost 5 years ago - Stars: 4 - Forks: 0

sarthak268/Multipurpose-Rover

This repository contains files for 'Multipurpose Rover' project done as a part of Introduction to Engineering Design course.

Size: 3.76 MB - Last synced at: 12 months ago - Pushed at: over 6 years ago - Stars: 4 - Forks: 1

Sensirion/arduino-uart-sfa3x

Arduino Library for the SFA3x sensor family.

Language: C++ - Size: 661 KB - Last synced at: 18 days ago - Pushed at: 9 months ago - Stars: 3 - Forks: 0

lab5e/aqserver

Air Quality Server

Language: Go - Size: 188 KB - Last synced at: about 2 months ago - Pushed at: over 1 year ago - Stars: 3 - Forks: 1

Laxilef/GasholderMon

Monitoring the parameters of your gasholder

Language: C++ - Size: 4.85 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 3 - Forks: 1

WebValley2022/DS2

FBK new gas sensors data analysis and modeling

Language: Jupyter Notebook - Size: 86.8 MB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 3 - Forks: 0

katahar/VACDAD

A portable unit that records CO2/VOC data and exports it to a CSV (Excel, etc.) file

Language: Python - Size: 36.1 KB - Last synced at: almost 2 years ago - Pushed at: almost 4 years ago - Stars: 3 - Forks: 0

Seeed-Studio/Seeed_Python_SGP30

The python3 code is to read the SGP30 measurements data.

Language: Python - Size: 12.7 KB - Last synced at: 4 days ago - Pushed at: 4 months ago - Stars: 2 - Forks: 3

Sensirion/raspberry-pi-uart-sfa3x

RaspberryPi driver for Sensirion SFA3x sensor module

Language: C - Size: 581 KB - Last synced at: about 2 months ago - Pushed at: 11 months ago - Stars: 2 - Forks: 0

ToreyGu/ESP-IoT-Sensor-SYSTEM-ESP-

Using ESP8266 to Implement Internet of Things Sensing Data Measurement

Language: C++ - Size: 277 KB - Last synced at: about 1 year ago - Pushed at: over 1 year ago - Stars: 2 - Forks: 0

Yourigh/FRA_Sensor_platform

Reading data from sensors, sending via UDP Ethernet

Language: C++ - Size: 542 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 2 - Forks: 0

Sensirion/linux-sgp30

Linux Kernel Driver for Sensirion SGP30 and SGPC3. External module based on the upstream sgp30 driver but feature-completed and backported to older kernels

Language: C - Size: 116 KB - Last synced at: 18 days ago - Pushed at: over 2 years ago - Stars: 2 - Forks: 2

Arduino-244/gas-sensor

Buzzes when a gas is detected

Language: C++ - Size: 124 KB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 2 - Forks: 0

sirigowda204/Home_Automation_System

This repository is about a Home Automation System developed using Tinkercad.

Language: C - Size: 1.86 MB - Last synced at: over 1 year ago - Pushed at: over 3 years ago - Stars: 2 - Forks: 0

Sensirion/embedded-uart-svm40 📦

Embedded UART driver for the SVM40 sensor module

Language: C - Size: 659 KB - Last synced at: about 2 months ago - Pushed at: about 4 years ago - Stars: 2 - Forks: 0

ostaquet/Arduino-Grove-MultichannelGasSensor-driver

Arduino driver for gas sensor Grove Multichannel Gas Sensor (CO, NO2, NH3, C3H8, C4H10, CH4, H2 and C2H50H)

Language: C++ - Size: 808 KB - Last synced at: about 2 years ago - Pushed at: almost 5 years ago - Stars: 2 - Forks: 0

Sensirion/raspberry-pi-i2c-sfa3x

RaspberryPi driver for Sensirion SFA3x sensor module

Language: C - Size: 1.07 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 1 - Forks: 1

Marta-Barea/arduino-MQ138-gas-sensor

Source code for MQ-138 gas sensor with Arduino UNO

Language: C++ - Size: 20.5 KB - Last synced at: 3 days ago - Pushed at: 4 months ago - Stars: 1 - Forks: 2

UdaySMukherjee/IOT-Smoke-Alarm

This repository contains all the resources you need to build a smart smoke alarm system using an Arduino ESP32. This device will not only sound an alarm when smoke is detected but also send an email notification to keep you informed wherever you are.

Language: C++ - Size: 129 KB - Last synced at: 11 months ago - Pushed at: 11 months ago - Stars: 1 - Forks: 0

romainmoreau/gas-sensor

Gas sensing services

Language: Java - Size: 358 KB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 1 - Forks: 0

DevinduDh/Air-Pollution-Detection-using-MQ-Series-Sensors

Air Pollution Detection model using Raspberry pi 3 Model B.

Language: Python - Size: 18.6 KB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 1 - Forks: 0

ToreyGu/GasClassification

A simple machine learning-based gas identification program implemented using scikit-learn, which can also be used in other machine learning scenarios

Language: Python - Size: 11.1 MB - Last synced at: about 1 year ago - Pushed at: over 1 year ago - Stars: 1 - Forks: 0

drtiwari/Internet-Of-Things-IoT-Projects

IOT Projects - Rain meter, Air Quality, Energy Consumption, Remote Automation, Linear Actuator, Dust Sensor, Light Sensor, Remote Distance Monitoring, Gas Sensors

Language: C++ - Size: 31.3 KB - Last synced at: about 1 year ago - Pushed at: almost 2 years ago - Stars: 1 - Forks: 0

Hufnagels/Docker-MQTT-INFLUX-GRAFANA

Smarthome system install

Language: Python - Size: 5.19 MB - Last synced at: over 1 year ago - Pushed at: almost 2 years ago - Stars: 1 - Forks: 0

zonque/gas-tally

ESP8266 based gas meter monitor

Language: C++ - Size: 813 KB - Last synced at: about 1 month ago - Pushed at: over 2 years ago - Stars: 1 - Forks: 0

showman-sharma/project-B-EAGLE

We propose a leak source search system mounted on small sized drones or rovers that will accurately reach the source of the gas leak or fire. Subsequently, the drone/rover might act as a beacon locating the source exactly or could manage the hazard if relevantly equipped. Here, we try: ● To create a Gas Leak Source Search System. ● To equip a drone with this system and make it reach the source. ● This drone would act like a beacon, informing the user about the exact location of the source.

Language: Jupyter Notebook - Size: 12.4 MB - Last synced at: almost 2 years ago - Pushed at: over 2 years ago - Stars: 1 - Forks: 0

mnett0/helium-bme680

Monitor the air quality of your home via the helium network.

Language: C - Size: 533 KB - Last synced at: about 1 year ago - Pushed at: over 2 years ago - Stars: 1 - Forks: 1

ThilinaSatoru/GAS-Leak-Detector

REALTIME MONITORING AND ALARM SYSTEM for gas leaks.

Language: C - Size: 5.86 KB - Last synced at: about 2 months ago - Pushed at: about 3 years ago - Stars: 1 - Forks: 0

smartgic/MMM-AirQuality

MagicMirror module to retrieve MQ2 sensor values and trigger LED and/or voice notifications.

Language: JavaScript - Size: 3.91 KB - Last synced at: 6 days ago - Pushed at: about 3 years ago - Stars: 1 - Forks: 0

AhnafSayed/Vehicle-Safety-System-Arduino-Project

In this project when a driver starts the vehicle this vehicle safety system will the check driver's breath using alcohol sensor and analyze that the driver is drunk or not after that in vehicle's start button there will be blood pressure and pulse oximeter sensor which will analyze driver's pulse and oxygen saturation. If the system finds any problem in data it will not start the vehicle and if the system doesn't find any problem in data from the breath analyzer, BP sensor and pulse oximeter it will start the vehicle. There will be a SOS messaging system if any accident occurs, it will send massage to emergency numbers immediately and pin the place where accident occurred using GPS tracking. Also, there will be an eye blink analyzer to detect if he is passed out or not, if there is no eye blinking for 5 or 7 second it will stop the vehicle immediately. This project is developed using Arduino IDE and OpenCV.

Size: 2.98 MB - Last synced at: about 2 years ago - Pushed at: over 3 years ago - Stars: 1 - Forks: 0

andresilmor/Gas-Sensor-with-LED-and-Piezo-alert

Example of using an Arduino with Leds and a Piezo as a Gas Sensor.

Language: C++ - Size: 109 KB - Last synced at: about 1 month ago - Pushed at: over 3 years ago - Stars: 1 - Forks: 0

domoticsduino/smarthome-fw-lib-esp8266-ddmq4

Library to interface MQ-4 gas sensor

Language: C++ - Size: 2.93 KB - Last synced at: over 1 year ago - Pushed at: over 3 years ago - Stars: 1 - Forks: 0

Sensirion/arduino-uart-svm40 📦

Arduino library for the SVM40 sensor.

Language: C++ - Size: 1.2 MB - Last synced at: about 2 months ago - Pushed at: over 3 years ago - Stars: 1 - Forks: 0

Sensirion/python-i2c-svm40 📦

This Python package contains the I²C driver for the SVM40 Evaluation Kit.

Language: Python - Size: 6.08 MB - Last synced at: about 2 months ago - Pushed at: about 4 years ago - Stars: 1 - Forks: 0

Sensirion/python-shdlc-svm40 📦

SHDLC driver for the SVM40 Evaluation Kit which has an UART interface using the SHDLC protocol.

Language: Python - Size: 6.46 MB - Last synced at: 9 days ago - Pushed at: about 4 years ago - Stars: 1 - Forks: 1

Sensirion/arduino-i2c-svm40 📦

Arduino library for the SVM40 sensor.

Language: C++ - Size: 229 KB - Last synced at: about 2 months ago - Pushed at: about 4 years ago - Stars: 1 - Forks: 0

ellolo/bme680-data-recorder

Language: Python - Size: 13.7 KB - Last synced at: 16 days ago - Pushed at: almost 5 years ago - Stars: 1 - Forks: 0

tspannhw/minifi-gasthermal

MiNiFi for Gas Sensors and Thermal Cameras

Language: Python - Size: 2.33 MB - Last synced at: about 1 year ago - Pushed at: over 5 years ago - Stars: 1 - Forks: 0

eyantra/gas-sensor-interfacing

Interface gas sensor module with the Firebird robot

Language: C - Size: 78.1 KB - Last synced at: over 1 year ago - Pushed at: over 5 years ago - Stars: 1 - Forks: 2

suayb25/ImageProcessingUnit

Raspberry Pi 3 B+(Image Live Stream), NodeMcu(Gas Sensor) and Ardunio(Car Control)

Language: Java - Size: 5.65 MB - Last synced at: about 2 years ago - Pushed at: over 5 years ago - Stars: 1 - Forks: 0

DyadicGit/automatic-ventilation-arduino

a ventilation project for a flat

Language: C++ - Size: 1.34 MB - Last synced at: over 1 year ago - Pushed at: over 5 years ago - Stars: 1 - Forks: 0

Aron-Arboleda/GasAndSmokeDetector

Arduino-based Gas and Smoke Warning System using MQ2 Sensor with LCD Monitoring

Language: C++ - Size: 285 KB - Last synced at: 5 days ago - Pushed at: 6 days ago - Stars: 0 - Forks: 0

UtkarshPunkar/Smart-Air-Quality-Monitor

IoT-based Smart Air Quality Monitor using ESP8266, DHT11, MQ135, OLED and ThingSpeak

Language: C++ - Size: 784 KB - Last synced at: 7 days ago - Pushed at: 8 days ago - Stars: 0 - Forks: 0

Boardoza/Boardoza_MQ4_Methane_Gas_Sensor_Breakout_Board

MQ4 Methane (CNG) Gas Sensor Board Module

Language: C++ - Size: 2.14 MB - Last synced at: 20 days ago - Pushed at: 20 days ago - Stars: 0 - Forks: 0

bvujovic/SensorNodeESP

Data from sensor (PIR, CO2, smoke/water detectors...) is logged and sometimes sent to user (WhatsApp message, E-mail).

Language: C++ - Size: 3.39 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

dishithag/Shopping-Mall-Safety-Tinkercad-Simulation

Shopping Mall Safety System - A Tinkercad IoT simulation using Arduino and sensors to enhance mall security, detect temperature, gas leaks, motion, lift overload, and control lighting automatically.

Language: C++ - Size: 283 KB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

KurayiChawatama/ChemNose-An-Automated-Gas-Detection-and-Statistical-Analysis-Platform

ChemNose is a low-cost Arduino-based gas detection platform by me for ULUROVER 's Science Team for Mars and Moon research. Inspired by SENose, it features modular sensors and aims to enhance data analysis capabilities.

Language: C++ - Size: 20.7 MB - Last synced at: 9 months ago - Pushed at: 9 months ago - Stars: 0 - Forks: 0

JosuaLimbu/sensor-mq2

Research Project from the Internet of Things course: Prototype Integration of MQ-2 Sensor on WhatsApp Bot and Website to Detect Gas Leaks

Language: C++ - Size: 1.56 MB - Last synced at: 21 days ago - Pushed at: 11 months ago - Stars: 0 - Forks: 0

fecton/iot-home-project

Language: C++ - Size: 9.77 KB - Last synced at: 12 months ago - Pushed at: 12 months ago - Stars: 0 - Forks: 0

CSULB-CECS-Senior-Design/ovos-skill-gas

OVOS skill to read MQ-2 sensor

Language: Python - Size: 20.5 KB - Last synced at: about 2 months ago - Pushed at: 12 months ago - Stars: 0 - Forks: 0

CSULB-CECS-Senior-Design/Sensor-Values

MQ-2 sensor reading using ADS1015

Language: Python - Size: 13.7 KB - Last synced at: 20 days ago - Pushed at: 12 months ago - Stars: 0 - Forks: 0

namanrox/fire_detection

Fire Detection through Flame and Gas Sensor (IOT)

Language: C++ - Size: 3.65 MB - Last synced at: about 2 months ago - Pushed at: 12 months ago - Stars: 0 - Forks: 0

anjananambiar/Pollution-Monitoring-system-using-IoT

A basic system which measures the temperature and humidity and displays it back on the LCD screen.

Language: C++ - Size: 1.17 MB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 0 - Forks: 0

yhotta240/gas-security-alarm-system

ガスセンサを使用してセキュリティアラームシステムを構築したものです。ガスの検知により、異常が検知された場合にアラームが発動します。

Language: C++ - Size: 6.84 KB - Last synced at: about 1 month ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

zer00d4y/smart_gas_sensor

Smart gas sensor on esp8266

Language: C++ - Size: 1.95 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

0marAmr/Vehicle_Tracking_System

Language: C - Size: 6.81 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

Gufdoor/gasec

Project of a simple gas detector system made using a MQ-2 sensor, ESP32 and Flutter app. It works on localhost socket connections and 'tis able to measure general gases concentrations.

Language: Dart - Size: 39.9 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

domoticsduino/smarthome-fw-esp8266-mq4-gas-sensor

Firmware for my board named ESP8266MCU11, based on ESP8266 microcontroller. This device use a MQ-4 gas sensor and use MQTT protocol to send data to OpenHAB Smart Home Automation System.

Language: C++ - Size: 13.7 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

vimalehaan/Customized-Popcorn-Maker-Arduino

1st year Microcontroller (Arduino) based Project, University of Moratuwa, Faculty of Information Technology.

Language: C++ - Size: 3.91 KB - Last synced at: about 1 year ago - Pushed at: almost 2 years ago - Stars: 0 - Forks: 0

Benny1315/project1

Final Project

Language: MATLAB - Size: 25.4 KB - Last synced at: about 1 year ago - Pushed at: almost 2 years ago - Stars: 0 - Forks: 0

Thulluru-Prem-Chand/kitchen-Monitoring-Alert-System

Arduino Project at MSME Vishakpatnam

Size: 6.07 MB - Last synced at: over 1 year ago - Pushed at: about 2 years ago - Stars: 0 - Forks: 0

romainmoreau/gas-sensor-ui

UI for gas-sensor-web

Language: TypeScript - Size: 1.8 MB - Last synced at: about 2 years ago - Pushed at: about 2 years ago - Stars: 0 - Forks: 2

lily-osp/e-nose-project

using multiple gas sensor and an arduino to creating electric nose

Language: C++ - Size: 6.49 MB - Last synced at: about 1 month ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Saka7/mqtt_mq9_sensor

MQTT MQ9 Sensor value publisher on esp8266 MCU

Language: C - Size: 203 KB - Last synced at: about 1 month ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

rizkymille/MG811

Library for MG811 gas sensor

Language: C++ - Size: 5.86 KB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

SFeli/ESP32_BME68x_IDF

ESP32 with the Library BME68x for IDF

Language: C - Size: 31.3 KB - Last synced at: about 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

mykeysid10/Fire-Alarm-System

Domain: IOT

Language: C++ - Size: 603 KB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

annapoorna-a-k/GAS-AND-LDR-SENSOR-Project

21AIE114 PRINCIPLES OF MEASUREMENTS AND SENSORS Project

Language: AGS Script - Size: 4.88 MB - Last synced at: 2 months ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 1

lintavo/Retavid

Visualización de datos en tiempo real que son generados por estación IoT provista con sensores de niveles de GPL y CO para fortalecer la seguridad industrial en estaciones de distribución, almacenaje y procesamiento de gas propano en El Salvador

Language: HTML - Size: 201 KB - Last synced at: about 2 years ago - Pushed at: almost 3 years ago - Stars: 0 - Forks: 0

Anas436/Fire-Detection-and-Alarm-Systems-using-Arduino-and-GSM-Module

Language: C++ - Size: 5.13 MB - Last synced at: 28 days ago - Pushed at: almost 3 years ago - Stars: 0 - Forks: 0

asankaSovis/MQ135-GAS-Sensor-Library-Proteus Fork of satyamkr80/MQ135-GAS-Sensor-Library-Proteus

📷 MQ135 Gas Sensor is an industrial level sensor that is suitable for detecting NH3, NOx, Alcohol, Benzene, Smoke, CO2, etc. Mostly used for sensing smoke from a fire, this sensor is a critical part in Arduino projects that involve fire sensing and air quality measuring. This Github project will provide the necessary files to add the MQ 135 Gas Sensor to your Proteus project.

Size: 37.1 KB - Last synced at: about 2 years ago - Pushed at: almost 3 years ago - Stars: 0 - Forks: 0

shreyas11g/TinkerCad-Arduino-Project

Fire Alarm System Project by Interfacing Arduino with Temperature & Gas Sensor using TinkerCad

Size: 1 MB - Last synced at: about 1 year ago - Pushed at: about 3 years ago - Stars: 0 - Forks: 0

Abidh56/Air-Analyzer

Air Analyzer, Using Almost All Kinds of MQ Sensors

Language: C++ - Size: 889 KB - Last synced at: about 1 year ago - Pushed at: over 3 years ago - Stars: 0 - Forks: 0

Abidh56/Air-Quality-Monitor

DIY Arduino air quality monitor which can measure surrounding air quality also shows temperature and humidity in your room.

Language: C++ - Size: 548 KB - Last synced at: about 1 year ago - Pushed at: over 3 years ago - Stars: 0 - Forks: 0

BurraAbhishek/toxic_place_detection

A simple Arduino-based Gas Leak Detection Device that can warn users about toxic environments, including abnormally high carbon dioxide levels

Language: C++ - Size: 233 KB - Last synced at: about 2 years ago - Pushed at: over 3 years ago - Stars: 0 - Forks: 0

shikhar321/Arduino-Projects

This repository contains codes of various Projects using Arduino

Language: C++ - Size: 287 KB - Last synced at: about 2 years ago - Pushed at: over 3 years ago - Stars: 0 - Forks: 0

Sensirion/raspberry-pi-uart-svm40 📦

RaspberryPi driver for Sensirion SVM40 sensor module

Language: C - Size: 655 KB - Last synced at: about 2 months ago - Pushed at: over 3 years ago - Stars: 0 - Forks: 0

Sensirion/embedded-i2c-svm40 📦

Embedded I2C driver for the SVM40 sensor module

Language: C - Size: 660 KB - Last synced at: about 2 months ago - Pushed at: about 4 years ago - Stars: 0 - Forks: 0

Sensirion/raspberry-pi-i2c-svm40 📦

RaspberryPi driver for Sensirion SVM40 sensor module

Language: C - Size: 1.01 MB - Last synced at: about 2 months ago - Pushed at: about 4 years ago - Stars: 0 - Forks: 0

sidhant-khamankar/Gas-Detection-System

Language: C++ - Size: 25.4 KB - Last synced at: almost 2 years ago - Pushed at: over 4 years ago - Stars: 0 - Forks: 0