bababooex/raspberrypi-subghz-ASK

Controlling cheap subghz ASK RX and TX modules using raspberry pi, that means signal cloning, using .sub file signal data and jamming!

Language: Python - Size: 1.18 MB - Last synced at: 5 days ago - Pushed at: 5 days ago - Stars: 1 - Forks: 0

qwandor/rfbutton

Rust library for decoding 433MHz RF remote codes.

Language: Rust - Size: 79.1 KB - Last synced at: 11 days ago - Pushed at: 11 days ago - Stars: 3 - Forks: 0

merbanan/rtl_433

Program to decode radio transmissions from devices on the ISM bands (and other frequencies)

Language: C - Size: 8.86 MB - Last synced at: 12 days ago - Pushed at: 13 days ago - Stars: 6,814 - Forks: 1,434

abeckDev/IoTDoorController

A collection of software used to utilize IoT devices to control 433MHz based door control systems.

Language: C# - Size: 119 KB - Last synced at: 17 days ago - Pushed at: 17 days ago - Stars: 0 - Forks: 0

pfichtner/SipDoorbell

ESP8266 Firmware that initiates calls to SIP numbers, can react on hardware button as well to 433 MHz signals

Language: C++ - Size: 155 KB - Last synced at: 20 days ago - Pushed at: 20 days ago - Stars: 15 - Forks: 2

kshetline/rpi-acu-rite-temperature

Library for reading Acu-Rite temperature/humidity sensor with Raspberry Pi via 433Mhz receiver

Language: C++ - Size: 82 KB - Last synced at: 7 days ago - Pushed at: 7 months ago - Stars: 8 - Forks: 0

bnthn/pico433mhzMQTTGateway Fork of AdrianCX/pico433mhz

Raspberry Pi Pico W receiver and mqtt-gateway for 433Mhz remote controls

Language: Python - Size: 9.49 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 5 - Forks: 0

spreedated/nxn-esocket 📦

Take control of 433.92 Mhz socket with your Raspberry Pi as a base station and nodes as NodeMCUv3 boards

Language: CSS - Size: 94.2 MB - Last synced at: 4 days ago - Pushed at: almost 4 years ago - Stars: 1 - Forks: 0

bwesterb/klikaanklikuit-homekit

KlikaanKlikuit switches – HomeKit bridge using an Arduino

Language: Go - Size: 36.1 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 3 - Forks: 0

nagyrobi/home-assistant-custom-components-cover-rf-time-based Fork of davidramosweb/home-assistant-custom-components-cover-time-based 📦

Time-based cover with customizable scripts or entity to trigger opening, stopping and closing. Position is calculated based on the fraction of time spent by the cover traveling up or down. State can be updated with information based on external sensors.

Language: Python - Size: 192 KB - Last synced at: 5 days ago - Pushed at: over 2 years ago - Stars: 88 - Forks: 84

liyanboy74/arduino-rolling-code-keeloq-receiver

Arduino RF rolling code keeloq receiver

Language: C - Size: 57.6 KB - Last synced at: about 1 month ago - Pushed at: 12 months ago - Stars: 19 - Forks: 4

mortylabs/multi_rflink_tcp_bridge

Python 3 app that aggregates 433mhz & 868mhz data from multiple RFLink devices over TCP and rebroadcasts it through a single TCP bridge for Home Assistant or NodeRED integration

Language: Python - Size: 86.9 KB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 1 - Forks: 1

annie444/ask433

A portable, no_std Amplitude Shift Keying (ASK/OOK) modem driver for 433 MHz RF transceivers.

Language: Rust - Size: 200 KB - Last synced at: 25 days ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

pkarsy/CC1101_RF

Arduino library for TI CC1101. Supports the latest Arduino IDE and Platformio. Tested with AVR atmega328, stm32f103, nodeMCU and probably works with a lot more.

Language: C++ - Size: 1.03 MB - Last synced at: about 1 month ago - Pushed at: 7 months ago - Stars: 48 - Forks: 10

jnsbyr/samd21-solardht

solar powered humidity and temperature senor with 433 MHz transmitter

Language: C++ - Size: 31.3 KB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

andi38/TPMS

Decode tire pressure monitoring system TPMS BLE 433MHz CC1101 ESP8266 ESP32

Language: C++ - Size: 26.4 KB - Last synced at: 3 months ago - Pushed at: almost 3 years ago - Stars: 82 - Forks: 9

andersevenrud/ha-nexa-bridge-x

Home Assistant - Nexa Bridge X Integration

Language: Python - Size: 210 KB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 10 - Forks: 3

FilipRokita/arduino-433mhz

Arduino project for receiving and transmitting 433 MHz RF signals using an AM ASK/OOK receiver and transmitter module.

Language: C++ - Size: 8.79 KB - Last synced at: 2 months ago - Pushed at: 6 months ago - Stars: 1 - Forks: 0

mrohner/Door-sensor-with-433MHz-and-ATTINY13

Magnetic Door and Window sensor sends open and close code to home automation system

Language: C++ - Size: 7.19 MB - Last synced at: 3 months ago - Pushed at: over 2 years ago - Stars: 19 - Forks: 3

djcasper1975/Meshmingle

A Message Network Using Lora And Wifi Meshing

Language: C++ - Size: 99.1 MB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 14 - Forks: 2

pimatic/pimatic-homeduino

Pimatic plugin for using 433mhz devices and sensors with a connected Arduino with homeduino sketch

Language: CoffeeScript - Size: 1.07 MB - Last synced at: 17 days ago - Pushed at: over 5 years ago - Stars: 36 - Forks: 29

thoukydides/homebridge-fantasia

Fantasia Viper fan plugin for Homebridge

Language: JavaScript - Size: 11.7 KB - Last synced at: 29 days ago - Pushed at: 3 months ago - Stars: 2 - Forks: 0

hn/esphome-configs

A collection of config files to integrate various hardware into ESPhome

Size: 903 KB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 9 - Forks: 3

hdtodd/omnisensor_433

An rtl_433-compatible multi-sensor system

Language: C++ - Size: 184 KB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 2 - Forks: 0

sdebby/RC_433_sig_analyze

Hardware hacking project, analyzing signal from remote control.

Size: 2.09 MB - Last synced at: 2 months ago - Pushed at: almost 2 years ago - Stars: 14 - Forks: 0

Power-Switch/PowerSwitch_Android 📦

PowerSwitch ist eine Android App zum Schalten von Funksteckdosen

Language: Java - Size: 235 MB - Last synced at: about 2 months ago - Pushed at: about 6 years ago - Stars: 31 - Forks: 12

de-dh/TP65-receiver-mpy

Receive temperature data with MicroPython from ThermoPro TP65s temperature sensor for microcontrollers.

Language: Python - Size: 567 KB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 2 - Forks: 0

fredilarsen/TeslaChargeDoorOpener

Open the Tesla charge door with an Arduino and an ASK STX882 transmitter

Language: C++ - Size: 14.6 KB - Last synced at: 4 months ago - Pushed at: over 5 years ago - Stars: 136 - Forks: 19

Harvie/amiccom-rf

Amiccom A7xxx RF Transciever IC Driver Library

Language: C++ - Size: 203 KB - Last synced at: 9 days ago - Pushed at: about 1 year ago - Stars: 2 - Forks: 0

Ikken9/cheetah

Portable WiFi/Bluetooth/RF-433MHz hacking device

Language: Rust - Size: 16.1 MB - Last synced at: 5 months ago - Pushed at: about 1 year ago - Stars: 33 - Forks: 1

tefinger/hass-brematic

Custom component for Home Assistant to support Brematic devices

Language: Python - Size: 36.1 KB - Last synced at: 7 days ago - Pushed at: about 1 year ago - Stars: 20 - Forks: 6

puuu/ESPiLight

ESPiLight - pilight 433.92 MHz protocols library for Arduino

Language: C++ - Size: 258 KB - Last synced at: 5 months ago - Pushed at: over 2 years ago - Stars: 118 - Forks: 44

kotyara12/reRx433

Модуль приемника RX 433MHz для охранно-пожарной сигнализации / Receiver module RX 433MHz for security and fire alarm.

Language: C++ - Size: 5.86 KB - Last synced at: 5 months ago - Pushed at: over 2 years ago - Stars: 4 - Forks: 2

janw/doorelf 📦

[moved to codeberg] 🧝‍♂️ Wireless doorbell Slack notifications for TeckNet WA 1078/1088

Language: Python - Size: 13.7 KB - Last synced at: 5 months ago - Pushed at: over 6 years ago - Stars: 2 - Forks: 1

unixb0y/CPY-CC1101

CPY-CC1101 a CircuitPython library for CC1101 RF Transceivers. I use it with a CC1101 Arduino module connected trough SPI to an Adafruit M4 Express.

Language: Python - Size: 52.7 KB - Last synced at: 5 months ago - Pushed at: over 1 year ago - Stars: 34 - Forks: 14

Tiegertropfen119-0001/Arduino-Car-Key-Jammer

🔑This is a small project about an RF module for an Arduino. This module can transmit at 433 MHz, which can be used to jam or disable a car key. ❗This project is for educational and informational purposes only. In some countries, it is illegal to block a signal. I assume no liability for any damage.❗

Language: C++ - Size: 309 KB - Last synced at: 5 months ago - Pushed at: about 2 years ago - Stars: 42 - Forks: 1

thejeffreystone/home-assistant-configuration

My Old Home Assistant Config. For more Information visit ->

Language: Python - Size: 4.7 MB - Last synced at: 3 months ago - Pushed at: almost 3 years ago - Stars: 414 - Forks: 67

sdague/arwn

Ambient Radio Weather Network - collect weather data off 433Mhz and publish to MQTT

Language: Python - Size: 170 KB - Last synced at: 3 months ago - Pushed at: 8 months ago - Stars: 27 - Forks: 1

theengs/home

Manufacturer agnostic BLE sensors applications and MQTT gateways

Size: 7.7 MB - Last synced at: 5 months ago - Pushed at: 11 months ago - Stars: 6 - Forks: 1

latchdevel/VirtualWire

A github'ified version of VirtualWire Arduino library v1.27 (2014)

Language: C++ - Size: 1.31 MB - Last synced at: 4 months ago - Pushed at: over 1 year ago - Stars: 6 - Forks: 0

hgszh/CMT2300A-Docs-Demos-Tools

Comprehensive resources for CMT2300A: Documentation, software, and examples.

Size: 103 MB - Last synced at: 5 months ago - Pushed at: 9 months ago - Stars: 2 - Forks: 1

angrest/SmartCC1101

This driver library offers a simple access to data transfer using the cc1101 module. It gives access to many configuration options without need to use RFStudio.

Language: C++ - Size: 80.1 KB - Last synced at: 5 months ago - Pushed at: about 1 year ago - Stars: 2 - Forks: 1

alixahedi/ASK_STM32

using RF Receiver module with STM32

Language: C - Size: 481 KB - Last synced at: 5 months ago - Pushed at: over 2 years ago - Stars: 3 - Forks: 1

nopnop2002/esp-idf-rc-switch

315/433MHz ASK RF driver for esp-idf

Language: C - Size: 51.8 KB - Last synced at: 5 months ago - Pushed at: 6 months ago - Stars: 28 - Forks: 2

WASmars/ESP32CAM-OV7725-TFT-ambilight

camera based TV ambilight

Language: C - Size: 7.67 MB - Last synced at: 6 months ago - Pushed at: 6 months ago - Stars: 16 - Forks: 3

sal3hyar/STM8S_RF_Receiver

A small project using stm8s mcu to receive & parse Ev1527 - 433Mhz RF data

Language: C - Size: 222 KB - Last synced at: 6 months ago - Pushed at: 6 months ago - Stars: 0 - Forks: 0

Capevace/433MHz

A Node module for sending data on a 433MHz transmitter via GPIO

Language: Python - Size: 7.81 KB - Last synced at: 6 days ago - Pushed at: almost 4 years ago - Stars: 3 - Forks: 0

devmel/hass_airsend

Home Assistant Component permettant d'envoyer des commandes radio via AirSend (RF433) ou AirSend duo (RF433 & RF868).

Language: Python - Size: 105 KB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 14 - Forks: 3

parsapoorsh/waveduino

replay attack 433Mhz RF using ESP8266 (or arduino)

Language: C++ - Size: 739 KB - Last synced at: 4 months ago - Pushed at: about 1 year ago - Stars: 6 - Forks: 0

rrooggiieerr/homeassistant-homeduino

Home Assistant integration for the Homeduino 433 MHz RF transceivers over the serial interface

Language: Python - Size: 397 KB - Last synced at: 5 months ago - Pushed at: 7 months ago - Stars: 8 - Forks: 3

nauti-control/STWirelessRemote

Open Source Wireless remote for Raymarine ST1000/ST2000 autopilots as well as ST60 speed timer.

Language: C++ - Size: 2.22 MB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 22 - Forks: 8

de-dh/MPY-RF

Simple programm for receiving 433 MHz signals using a RX470C module and enhancing reception

Language: Python - Size: 4.44 MB - Last synced at: about 1 month ago - Pushed at: 10 months ago - Stars: 2 - Forks: 0

latchdevel/pyRCSwitch

Python module to wrap the RCSwitch Common Library

Language: Python - Size: 23.4 KB - Last synced at: 6 months ago - Pushed at: 7 months ago - Stars: 1 - Forks: 0

lightaprs/LightLoRaAPRS

ESP32 based LoRa APRS Software for LightTracker Plus

Language: C++ - Size: 203 KB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 6 - Forks: 1

anarsoul/esp-rf-ook

Decoder for Nexus-TH signal for ESP32 written in Rust

Language: Rust - Size: 17.6 KB - Last synced at: 5 months ago - Pushed at: 7 months ago - Stars: 1 - Forks: 0

troglobit/rfctl

Linux driver and control tool for 433 MHz communication on Raspberry Pi

Language: C - Size: 150 KB - Last synced at: 5 months ago - Pushed at: almost 7 years ago - Stars: 28 - Forks: 2

denis-stepanov/esp8266-mailbox

Use ESP8266 to receive notifications from your outdoor mailbox

Language: C++ - Size: 11.9 MB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 6 - Forks: 1

d-Rickyy-b/pyBrematic

Python library for controlling Brematic remote power outlets and potentially other stuff

Language: Python - Size: 246 KB - Last synced at: 7 days ago - Pushed at: over 1 year ago - Stars: 13 - Forks: 4

tdorssers/weather-station

Weather station with remote sensors and TFT color display

Language: C - Size: 2.58 MB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 3 - Forks: 0

Aschhoff/ESP32-433Mhz-Transmitter

A pure microPython Transmitter. You can create and add your own encoder

Language: Python - Size: 16.6 KB - Last synced at: 4 months ago - Pushed at: over 4 years ago - Stars: 11 - Forks: 4

buserror/rf_bridge

RF (433Mhz) to MQTT Bridge - with hardware

Language: C - Size: 1.27 MB - Last synced at: 5 days ago - Pushed at: over 7 years ago - Stars: 39 - Forks: 8

f321x/wireless_motion_sensor_esp32 📦

Simple, low power, high range, wireless motion detection/alarm using esp32, hc12 radio modules, HC-SR505 PIR Sensor, HW-508 Piezo Buzzer

Language: C++ - Size: 9.77 KB - Last synced at: 4 months ago - Pushed at: over 2 years ago - Stars: 2 - Forks: 0

mineiwik/CoralWave

Custom Sub-GHz Transceiver Gateway

Size: 562 KB - Last synced at: 2 months ago - Pushed at: about 2 years ago - Stars: 4 - Forks: 0

Hue-Jhan/433mhz-Jammer

433Mhz Radio Jammer using arduino and rf Module

Language: C++ - Size: 1.71 MB - Last synced at: 5 months ago - Pushed at: 11 months ago - Stars: 12 - Forks: 1

abcdqfr/rtl433-ha

RTL-433 Home Assistant Integration (Alpha) - Connect 433MHz sensors directly via RTL-SDR without the need for MQTT.

Language: Python - Size: 122 KB - Last synced at: 4 months ago - Pushed at: 9 months ago - Stars: 0 - Forks: 0

Legobas/rfxcom2mqtt

RFXCOM to MQTT bridge

Language: JavaScript - Size: 91.8 KB - Last synced at: 4 months ago - Pushed at: over 1 year ago - Stars: 6 - Forks: 4

codingABI/SolarPoweredSender

A solar powered ATmega328P based DIY device to control 433 MHz ASK power outlets

Language: C++ - Size: 1.76 MB - Last synced at: 6 months ago - Pushed at: 9 months ago - Stars: 0 - Forks: 0

1technophile/rc-switch Fork of sui77/rc-switch

Arduino lib to operate 433/315Mhz devices like power outlet sockets and receive PIR, door, window sensor signals

Language: C++ - Size: 196 KB - Last synced at: 8 months ago - Pushed at: over 3 years ago - Stars: 29 - Forks: 12

leech001/HCS301

STM32 HAL library for reading code from HCS301 433Mhz Keeloq

Language: C - Size: 412 KB - Last synced at: 5 months ago - Pushed at: over 5 years ago - Stars: 19 - Forks: 1

latchdevel/picoder

Simple standalone command line tool to decode and encode OOK protocols supported by "pilight" project.

Language: C - Size: 50.8 KB - Last synced at: 5 months ago - Pushed at: 11 months ago - Stars: 5 - Forks: 1

aviyall/replay-attack

A frequency replaying device working at 433mhz and 315mhz using Arduino board

Language: C++ - Size: 6.84 KB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 5 - Forks: 0

latchdevel/rc-switch-lib

Adaptation of RCSwitch Arduino library to be used on any system to encode and decode RC codes

Language: C++ - Size: 39.1 KB - Last synced at: 6 months ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

puuu/MQTT433gateway

MQTT 433.92 MHz radio-frequency device gateway

Language: C++ - Size: 2.67 MB - Last synced at: 5 months ago - Pushed at: over 2 years ago - Stars: 137 - Forks: 27

dl1lmh/LoRa-Board-for-Olimex-UEXT

LoRa Board with UEXT Connector for Olimex-Modules

Size: 1.34 MB - Last synced at: 3 months ago - Pushed at: 10 months ago - Stars: 0 - Forks: 0

devmel/jeedom_airsend

Plugin Jeedom permettant d’utiliser le AirSend (RF433) ou AirSend duo (RF433 & RF868) en émission et réception.

Language: PHP - Size: 1.44 MB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 0 - Forks: 0

jehy/arduino-came-reader

433 Mhz reader for came gates

Language: C++ - Size: 2.93 KB - Last synced at: 6 months ago - Pushed at: over 3 years ago - Stars: 2 - Forks: 1

elmot/hc-12-rr-beacon

433.925 MHz radiobeacon for http://randomrace.ru based on hc-12 board

Language: C - Size: 13.7 MB - Last synced at: 3 months ago - Pushed at: over 3 years ago - Stars: 10 - Forks: 2

madnerdorg/radio433 📦

Control 433/315Mhz devices (power outlets/bulbs/text)

Language: C++ - Size: 1.39 MB - Last synced at: 3 months ago - Pushed at: about 8 years ago - Stars: 5 - Forks: 0

latchdevel/PiCode

C/C++ library to manage OOK protocols supported "pilight" project

Language: C - Size: 184 KB - Last synced at: 5 months ago - Pushed at: 11 months ago - Stars: 2 - Forks: 0

Wl0cKk/MotionAlarm

Alarm system controlled by 433 MHz remote control, based on Arduino Nano and Ultrasonic rangefinder HC-SR04

Language: C++ - Size: 79.1 KB - Last synced at: 6 months ago - Pushed at: 12 months ago - Stars: 1 - Forks: 0

quoraquestions/CC1101_Raspberry_PI_2

Language: C - Size: 220 KB - Last synced at: 3 months ago - Pushed at: over 8 years ago - Stars: 7 - Forks: 1

mwerlen/smart-home-collector

This projects aims to collect data from 433 MHz sensors (thermometer, hygrometer...).

Language: Python - Size: 112 KB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 0 - Forks: 0

smarthome-go/rpirf

A Go library for sending 433mhz signals from a Raspberry Pi

Language: Go - Size: 38.1 KB - Last synced at: 5 months ago - Pushed at: about 2 years ago - Stars: 4 - Forks: 1

gavinlyonsrepo/RF_DATA_LINK

A low power RF data link between two ATmega328's based Arduino units , Sensor data is transferred Via a 433 Mhz transmitter. and then displayed on an OLED CH1115.

Language: C++ - Size: 123 KB - Last synced at: 2 months ago - Pushed at: about 1 year ago - Stars: 7 - Forks: 0

rstrouse/ESPSomfy-RTS

A controller for Somfy RTS shades and blinds

Language: C++ - Size: 54.5 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 343 - Forks: 26

sterzy/rc-snitch

A small utility to monitor and interact with 433MHz based power sockets.

Language: Python - Size: 16.6 KB - Last synced at: about 1 year ago - Pushed at: about 5 years ago - Stars: 1 - Forks: 0

tofurky/kidde_cc1101

Experiments with Kidde / Wink 433MHz wireless protocol

Language: C++ - Size: 2.63 MB - Last synced at: 5 months ago - Pushed at: about 5 years ago - Stars: 13 - Forks: 1

latchdevel/RemoteSensor

RemoteSensor library for Arduino

Language: C++ - Size: 321 KB - Last synced at: 6 months ago - Pushed at: about 1 year ago - Stars: 0 - Forks: 0

atao/RTL_Tracking

👁️ Store findings from rtl_433 in SQLite

Language: Python - Size: 9.77 KB - Last synced at: 4 months ago - Pushed at: about 1 year ago - Stars: 1 - Forks: 1

peter-g-wilson/yaesa

Yet Another Environment Sensor Aggregator

Language: C - Size: 906 KB - Last synced at: about 1 month ago - Pushed at: over 3 years ago - Stars: 10 - Forks: 0

nuclearcat/stm8rf

TX only RF OOK link, encrypted, STM8

Language: C - Size: 14.6 KB - Last synced at: 6 months ago - Pushed at: over 5 years ago - Stars: 3 - Forks: 0

peter-g-wilson/PICO_PIO_Manchester_433MHzOOK_F007

Using PICO PIO, RX decode of 433 MHz OOK Manchester encoded messages from remote F007 temperature sensors.

Language: C - Size: 15.6 KB - Last synced at: 5 months ago - Pushed at: about 4 years ago - Stars: 6 - Forks: 1

latchdevel/raspicode

High precision transmitter RF 315/433Mhz codes for Raspberry Pi

Language: C - Size: 560 KB - Last synced at: 6 months ago - Pushed at: over 1 year ago - Stars: 3 - Forks: 0

ioBroker/ioBroker.rflink

Support of RFLink

Language: JavaScript - Size: 1.45 MB - Last synced at: 21 days ago - Pushed at: about 1 year ago - Stars: 11 - Forks: 11

matonf/sam2

SAM2 est un projet de domotique, il pilote les objets connectés de mon logement. SAM2 is a domotic project for my home (lights, shutters).

Language: PHP - Size: 1.45 MB - Last synced at: about 1 year ago - Pushed at: almost 3 years ago - Stars: 0 - Forks: 0

Jbrimbelibap/io868 Fork of kripthor/io433

Fork of io433, with a basic way to change the operating frequency and to load custom code, without needing to record them

Language: C - Size: 10.1 MB - Last synced at: 8 months ago - Pushed at: about 2 years ago - Stars: 8 - Forks: 0

dewenni/ESP_Marley_MQTT

Control your Marley Fresh air heat exchanger MEnV with ESP8266 and MQTT

Language: C++ - Size: 9.77 KB - Last synced at: about 14 hours ago - Pushed at: almost 3 years ago - Stars: 2 - Forks: 1

mr-brune/NexusTX

Arduino library to transmit with Nexus / Rubiscon protocol used in temperature sensor at 433 Mhz

Language: C++ - Size: 16.6 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 1 - Forks: 0

drakeapps/mqtt-433mhz-fan

433 MHz Fan MQTT (Homebridge) Server

Language: JavaScript - Size: 2.04 MB - Last synced at: about 1 year ago - Pushed at: almost 3 years ago - Stars: 1 - Forks: 1

drakeapps/mqtt-433mhz-dimmable-led

433 Mhz Dimmable LED MQTT (Homebridge) Controller

Language: JavaScript - Size: 60.5 KB - Last synced at: about 1 year ago - Pushed at: almost 3 years ago - Stars: 2 - Forks: 1