fortuna/ESPHomeBadge

Program your HOPE Badge with ESPHome

Size: 527 KB - Last synced at: about 6 hours ago - Pushed at: about 7 hours ago - Stars: 0 - Forks: 0

tum-esm/HES-Praktikum

Hands-on Environmental Sensing Praktikum - Aufbau und Charakterisierung eines Low-Cost CO2 Sensors

Language: Jupyter Notebook - Size: 10 MB - Last synced at: 2 days ago - Pushed at: 2 days ago - Stars: 0 - Forks: 0

pioarduino/platform-espressif32 Fork of platformio/platform-espressif32

Espressif 32: pioarduino community platform compatible with PlatformIO

Language: Python - Size: 3.75 MB - Last synced at: 3 days ago - Pushed at: 3 days ago - Stars: 354 - Forks: 40

alexandrebobkov/ESP32-C3_Breadboard-Adapter

ESP32-C3 Breadboard Adapter

Size: 4.15 MB - Last synced at: 5 days ago - Pushed at: 5 days ago - Stars: 0 - Forks: 0

AndroidCrypto/ESP32_C3_ST7735_Bme280

Getting started with a BME280 environment sensor connected to an ESP32-C3 Supermini device and ST7735 TFT display

Language: C++ - Size: 12.7 KB - Last synced at: 5 days ago - Pushed at: 5 days ago - Stars: 0 - Forks: 0

guimpt/iot_hdmi_mux

IoT enabled HDMI mux

Language: C - Size: 16.1 MB - Last synced at: 6 days ago - Pushed at: 6 days ago - Stars: 0 - Forks: 0

m5stack/M5Unified

Unified library for M5Stack series

Language: C++ - Size: 2.8 MB - Last synced at: 6 days ago - Pushed at: 14 days ago - Stars: 400 - Forks: 67

SerhiiLe/Clock_Mini

Yet another clock on MAX7219

Language: C++ - Size: 5.81 MB - Last synced at: 7 days ago - Pushed at: 7 days ago - Stars: 0 - Forks: 0

AndroidCrypto/TFT_eSPI Fork of Bodmer/TFT_eSPI

Arduino and PlatformIO IDE compatible TFT library optimised for the Raspberry Pi Pico (RP2040), STM32, ESP8266 and ESP32 that supports different driver chips

Language: C - Size: 6.98 MB - Last synced at: 7 days ago - Pushed at: 7 days ago - Stars: 0 - Forks: 0

esp-rs/std-training

Embedded Rust on Espressif training material.

Language: Rust - Size: 1.02 MB - Last synced at: 6 days ago - Pushed at: 4 months ago - Stars: 673 - Forks: 89

olaamerbt/BLE_PressKey

Ultra-low-power ESP32-C3 Bluetooth HID gadget, one button, sends a key press, auto-sleeps for weeks on a coin cell.

Language: C++ - Size: 12.7 KB - Last synced at: 9 days ago - Pushed at: 9 days ago - Stars: 0 - Forks: 0

SerhiiLe/clock-ws2812b

Clock based on ws2812b 32x8 RGB matrix

Language: C++ - Size: 3.08 MB - Last synced at: 10 days ago - Pushed at: 10 days ago - Stars: 6 - Forks: 3

AndreaFuzz/BLE_PressKey

Language: C++ - Size: 4.88 KB - Last synced at: 11 days ago - Pushed at: 11 days ago - Stars: 0 - Forks: 0

mjhaahr/RGB-LED-Pendant

Small RGB LED Pendant using 1010 (1.0x1.0mm) WS2812B LEDs powered by an ESP32-C3 Mini with a BNO055 IMU

Language: C - Size: 30 MB - Last synced at: 12 days ago - Pushed at: 12 days ago - Stars: 1 - Forks: 0

mkaiser/ESP32-CAN

PCB with ESP32 and CAN bus. For controlling CAN-devices like heatpumps via ESPHome

Language: AGS Script - Size: 18.9 MB - Last synced at: 6 days ago - Pushed at: over 1 year ago - Stars: 29 - Forks: 5

SiloCityLabs/esp32-minisd

Project Examples Using ESP32minisd PCB

Language: C++ - Size: 43 KB - Last synced at: 17 days ago - Pushed at: 17 days ago - Stars: 2 - Forks: 1

har-in-air/ESP32C3_BLUETOOTH_AUDIO_VARIO

ESP32-C3 audio vario using Kalman filter to fuse acceleration and pressure sensor data. Bluetooth transmission of LK8EX1 sentences.

Language: C++ - Size: 1.71 MB - Last synced at: 17 days ago - Pushed at: 17 days ago - Stars: 24 - Forks: 5

SulaimanNiazi/ESP32-MFRC522-RFID-reader-writer

A module written to interface ESP32-C3-mini-1 with RFID MFRC522 to detect, read and write to tags.

Language: C++ - Size: 7.81 KB - Last synced at: 17 days ago - Pushed at: 18 days ago - Stars: 0 - Forks: 0

Spooks4576/Ghost_ESP

Ghost ESP is a ESP32 Firmware that Revolutionizes the way we use ESP32 devices in a Pen Testing aspect

Language: C - Size: 137 MB - Last synced at: 21 days ago - Pushed at: about 1 month ago - Stars: 948 - Forks: 148

desiFish/EPaper-Display-Weather-Clock

E-Paper Display based ultra efficient mini personal weather station

Language: C - Size: 36.1 MB - Last synced at: 22 days ago - Pushed at: 23 days ago - Stars: 6 - Forks: 0

muki01/SBUS_Receiver

SBUS_Receiver is a project that receives wireless data via NRF24L01 and outputs it as SBUS signals, compatible with both Arduino and ESP32 platforms.

Language: C++ - Size: 4.88 KB - Last synced at: 23 days ago - Pushed at: 24 days ago - Stars: 2 - Forks: 0

c0m4r/esp32-c3-fox-energy1-display

ESP32-C3 Fox Energy Power Monitor Display

Language: C++ - Size: 379 KB - Last synced at: about 18 hours ago - Pushed at: 27 days ago - Stars: 0 - Forks: 0

firefly/pixie-firmware

Firefly Pixie Firmware.

Language: C - Size: 5.26 MB - Last synced at: 4 days ago - Pushed at: about 1 month ago - Stars: 15 - Forks: 7

yijenlu1971/ESP32C3

ESP32-C3 projects on Arduino IDE

Language: C - Size: 9.6 MB - Last synced at: 27 days ago - Pushed at: 27 days ago - Stars: 3 - Forks: 1

funnygeeker/micropython-easymenu

A simple menu library for Micropython. MicroPython 的简易菜单库

Language: Python - Size: 53.4 MB - Last synced at: 16 days ago - Pushed at: about 1 year ago - Stars: 21 - Forks: 1

tasmota/mgos32-to-tasmota32 Fork of phiten/mgos32-to-tasmota32

ESP32 Mongoose OS to Tasmota32 OTA updates for Shelly

Language: Shell - Size: 4.95 MB - Last synced at: 30 days ago - Pushed at: 30 days ago - Stars: 188 - Forks: 12

sigmdel/supermini_esp32c3_sketches

Super Mini ESP32-C3 sketches

Language: C++ - Size: 350 KB - Last synced at: 29 days ago - Pushed at: 7 months ago - Stars: 59 - Forks: 9

Narukara/std-training-zh-cn

Embedded Rust on Espressif 简体中文版

Language: Rust - Size: 1.71 MB - Last synced at: about 1 month ago - Pushed at: 3 months ago - Stars: 88 - Forks: 6

DavidFrankland/esp32-c3-blink

Espressif ESP32-C3 blink howto

Language: C++ - Size: 178 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

john30/ebusd-esp32

Firmware for ESP32-C3 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)

Size: 45.9 KB - Last synced at: about 1 month ago - Pushed at: 3 months ago - Stars: 28 - Forks: 1

RomanAlexandroff/42-Smart-Cluster-Sign

An IoT door sign for 42 campuses that use their clusters as exam rooms. The sign warns of ongoing exams, preventing unaware students from entering the room and disrupting those taking the test. It automatically checks active exams on Intra, providing peace of mind to the Pedago team.

Language: C - Size: 24.4 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 9 - Forks: 1

beryllium-org/OS

Beryllium OS, a unix-like operating system for CircuitPython powered microcontrollers. (Formerly known as ljinux)

Language: Python - Size: 13 MB - Last synced at: 29 days ago - Pushed at: 2 months ago - Stars: 285 - Forks: 17

ClaudeMarais/Airsoft-HUD

Transparent HUD for an Airsoft gun that shows how many BBs are left in your magazine and keeps track of your number of kills and deaths during a match. A XIAO ESP32-C3 is used together with a SSD1309 transparent OLED display. An IR Transmitter LED and IR Receiver sensor is used to detect BBs. Video: https://youtu.be/BZJjDX5xyRM

Language: C++ - Size: 25.7 MB - Last synced at: about 1 month ago - Pushed at: 3 months ago - Stars: 8 - Forks: 0

wurthless-elektroniks/clock

The Most Useless Clock in the World: Seven-segment digital desktop clock for Python/Micropython

Language: Python - Size: 1.94 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

sigmdel/xiao_esp32c3_sketches

Basic XIAO ESP32-C3 sketches

Language: C++ - Size: 763 KB - Last synced at: about 1 month ago - Pushed at: 10 months ago - Stars: 12 - Forks: 2

funnygeeker/micropython-easydisplay

A display library: implemented purely in Micropython. 纯 Micropython 实现的显示库

Language: Python - Size: 61 MB - Last synced at: about 1 month ago - Pushed at: about 1 year ago - Stars: 62 - Forks: 12

pilotak/ESP-boilerplate

Base code for AsyncWifiManager, AsyncMQTT and HTTP OTA

Language: C - Size: 19.5 KB - Last synced at: 27 days ago - Pushed at: almost 2 years ago - Stars: 9 - Forks: 0

plantineers/edge

The microcontroller firmware of plantbuddy

Language: Rust - Size: 95.7 KB - Last synced at: about 1 month ago - Pushed at: over 1 year ago - Stars: 16 - Forks: 1

s60sc/ESP32-IO_Extender

ESP32 application to act as an IO Extender for another ESP.

Language: C++ - Size: 1.05 MB - Last synced at: 13 days ago - Pushed at: 9 months ago - Stars: 37 - Forks: 8

BOlaerts/ESPHome-W5500-Ethernet-on-ESP32-boards

Home Assistant integration using ESPHome on a different ESP32 boards with W5500 ethernet and I²C bus

Size: 2.03 MB - Last synced at: about 1 month ago - Pushed at: 11 months ago - Stars: 16 - Forks: 2

RomanAlexandroff/IoT-Name-Badge-ESP32

Wi-Fi enabled E-paper name badge — the one for true Embedded Developers.

Language: C - Size: 372 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 2 - Forks: 0

CelliesProjects/ESP32_VS1053_Stream

A streaming library for Arduino esp32 with a vs1053 mp3/aac/ogg/flac decoder. Plays http, https (insecure mode) and chunked streams and parses the metadata. Also plays ogg and mp3 from sdcard.

Language: C++ - Size: 179 KB - Last synced at: about 1 month ago - Pushed at: 2 months ago - Stars: 80 - Forks: 15

designer2k2/xmas-tree

XMAS Tree from stacked ws2812 rings driven by a Digispark

Language: C++ - Size: 907 KB - Last synced at: about 1 month ago - Pushed at: over 1 year ago - Stars: 28 - Forks: 16

DitroniX/CWX-Compact-Weather-Station

DitroniX CWX ESP32-C3 BME280 SFH2440 Compact Weather Station Battery Powered

Language: C++ - Size: 59.6 MB - Last synced at: 20 days ago - Pushed at: about 2 months ago - Stars: 4 - Forks: 0

ClaudeMarais/GPS_Tracking_Cat_Collar_XIAO_ESP32-C3

An Arduino project to log GPS data to a MicroSD using the tiny XIAO ESP32-C3. The components are small and light enough to fit around a cat collar! Now we know where the cat runs around at night :-)

Language: C++ - Size: 2.66 MB - Last synced at: about 1 month ago - Pushed at: 3 months ago - Stars: 14 - Forks: 3

hnz1102/current-logger

This tool provides a logging function that gets data on voltage, current and power consumption. Voltage input range is from 0 to 85V, Maximum current input is 15A.

Language: Rust - Size: 8.14 MB - Last synced at: about 1 month ago - Pushed at: over 1 year ago - Stars: 14 - Forks: 1

BushlanovDev/ble-telemetry-lite

✈️🎮📲 Crossfire and ELRS telemetry bridge from radio transmitter via BLE and WebSocket

Language: C++ - Size: 938 KB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 1 - Forks: 0

pixelEDI/ESP32_XIAO

ESP32-XIAO Stuff

Language: C - Size: 8.98 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 3 - Forks: 0

TheGarmr/SmartUPS

A project to make standard UPS smarter for status monitoring and Home Assistant integration.

Language: C++ - Size: 1.57 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 0 - Forks: 0

Pekaway/ESP32-BLE-WIFI-SHUNT

ESP32-C3 Battery Monitor Shunt

Language: C++ - Size: 6.55 MB - Last synced at: 13 days ago - Pushed at: 13 days ago - Stars: 4 - Forks: 0

s60sc/ESP32-Tuya_Device

Replace Tuya device wifi module with ESP32-C3

Language: C++ - Size: 2.73 MB - Last synced at: 13 days ago - Pushed at: 4 months ago - Stars: 40 - Forks: 6

javiser/esp32-c3-32s-kit-example

A simple Rust example for the ESP-C3-32S-Kit ESP32 WiFi+Bluetooth Development Board with ESP32C3 chip from Ai-Thinker

Language: Rust - Size: 23.4 KB - Last synced at: about 1 month ago - Pushed at: over 3 years ago - Stars: 9 - Forks: 4

zidqat/ESP32MiniEAF

A small, simple and cheap automatic focuser, inspired by the MyFocuserPro versions, using an ESP32 C3 Mini and a 28byj-48 stepper motor.

Size: 13.7 KB - Last synced at: about 2 months ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

darvik80/magic-lamp-espidf

Language: C++ - Size: 1.87 MB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 2 - Forks: 0

tutla53/tutla53

I am currently working on embedded project with Raspberry Pi Pico W RP2040, ESP32, and STM32 for hobby.

Size: 72.3 KB - Last synced at: about 2 months ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0

etiennecollin/wakesp

Wakesp is a Rust-based firmware for ESP32 microcontrollers, offering dynamic DNS updates, a web interface, and Wake-on-LAN capabilities with a minimal memory footprint.

Language: Rust - Size: 89.8 KB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 2 - Forks: 0

DitroniX/AQIX-Air-Quality-Monitor-IoT-Weather-Station

AQIX ESP32-C3 SDK (Air Quality Monitor IoT Weather Station)

Language: C - Size: 42.7 MB - Last synced at: 4 days ago - Pushed at: 3 months ago - Stars: 2 - Forks: 0

muki01/PPM_Receiver

PPM_Receiver is a project that receives wireless data via NRF24L01 and outputs it as PPM signals, compatible with both Arduino and ESP32 platforms.

Language: C++ - Size: 11.7 KB - Last synced at: 4 days ago - Pushed at: 3 months ago - Stars: 3 - Forks: 1

pixelspark/rv32jit

A RISC-V (rv32imc) assembler for JITing on the ESP32

Language: Rust - Size: 77.1 KB - Last synced at: about 2 months ago - Pushed at: over 1 year ago - Stars: 4 - Forks: 0

peff74/ESP_connect_to_strongest_WiFi

a little arduino skript that helps to connect your ESP8266 or ESP32 to the strongest WiFi and reconnet if needed

Language: C++ - Size: 3.65 MB - Last synced at: 1 day ago - Pushed at: 1 day ago - Stars: 0 - Forks: 0

TobleMiner/blinkekatze-firmware

Firmware for Blinkekatze, a replacement PCB to turn cat themed night-lights into interactive light displays

Language: C - Size: 528 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 22 - Forks: 3

hxelec/antc3

150g Antweight Combat Robot project (Hirex)

Language: C++ - Size: 248 KB - Last synced at: about 1 month ago - Pushed at: about 1 year ago - Stars: 10 - Forks: 3

ClaudeMarais/FindEachOtherCompass_ESP32-C3

An Arduino project to create a compass that not only points North, but also points to another person. This is very useful for outdoor teams sports like Airsoft.

Language: C++ - Size: 3.1 MB - Last synced at: about 1 month ago - Pushed at: 3 months ago - Stars: 9 - Forks: 2

ClaudeMarais/Simple_OBD2_for_AlfaRomeoGiulia

A simple Arduino project to show how to communicate with your car's OBD2 port using an ESP32-C3 and SN65HVD230 CAN bus transceiver, using ESP32 TWAI (Two-Wire Automotive Interface)

Language: C++ - Size: 879 KB - Last synced at: 3 months ago - Pushed at: 4 months ago - Stars: 5 - Forks: 0

mboehmerm/Luatos_C3_Core_DIO_SSD1309_I2C_128x64

Testing a cheap aliexpress 1.3" OLED I2C Display with Luatos ESP32 C3 Core and u8g2 library by olikraus

Language: C++ - Size: 7.87 MB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 7 - Forks: 1

NateAsia/ESP32-DRS

FSAE Drag Reduction System Firmware

Language: C++ - Size: 17.7 MB - Last synced at: about 1 month ago - Pushed at: 4 months ago - Stars: 2 - Forks: 1

andypiper/fivebyfive

Polyglot examples for the 01Space ESP32-C3FH4-RGB board

Language: Python - Size: 23.6 MB - Last synced at: 4 days ago - Pushed at: about 1 year ago - Stars: 39 - Forks: 9

codeljo/riscv-bare-metal

RISC-V Bare Metal Starter Kit

Language: BitBake - Size: 149 KB - Last synced at: 3 months ago - Pushed at: 8 months ago - Stars: 1 - Forks: 0

ChocolateLoverRaj/rust-esp32c3-examples

Examples with wiring diagrams for using some sensors with ESP32-C3, programmed with Rust

Language: Rust - Size: 78.4 MB - Last synced at: 28 days ago - Pushed at: 6 months ago - Stars: 9 - Forks: 2

Pako2/ESP32_MasterClock

A simple source of polarized pulses for controlling (networks of) slave clocks.

Language: C++ - Size: 28.9 MB - Last synced at: about 1 month ago - Pushed at: 6 months ago - Stars: 1 - Forks: 0

bokunimowakaru/esp32c3

Arduino Code Examples of I/O controled Wireless Communications for ESP32-C3, XIAO ESP32C3, and M5Stamp C3/C3U

Language: C++ - Size: 320 KB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 10 - Forks: 2

mineiwik/CoralWave

Custom Sub-GHz Transceiver Gateway

Size: 562 KB - Last synced at: about 1 month ago - Pushed at: over 1 year ago - Stars: 4 - Forks: 0

georgik/esp32-sdl3-swift-example

Example of Embedded Swift with SDL3 on ESP32-P4, ESP32-C3, ESP32-C6

Language: Swift - Size: 471 KB - Last synced at: 11 days ago - Pushed at: 6 months ago - Stars: 14 - Forks: 0

21km43/ESP32-C3-DevBoard

ESP32-C3 Development Board

Size: 3.01 MB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 3 - Forks: 0

MicroControleurMonde/ESP32-C3_RNG

A Micro-python library which provides an interface to generate a random number using the ESP32-C3's hardware RNG.

Language: Python - Size: 27.3 KB - Last synced at: about 1 month ago - Pushed at: 5 months ago - Stars: 1 - Forks: 0

taunusflieger/esp-idf-async-wifi-experiment

Minimal esp-idf async wifi example

Language: Rust - Size: 1.28 MB - Last synced at: 27 days ago - Pushed at: over 2 years ago - Stars: 10 - Forks: 0

Sadteeto/ESP32-I2S-Microphone-Stream

esp32 I2S microphone streaming service

Language: C++ - Size: 7.81 KB - Last synced at: 29 days ago - Pushed at: about 1 year ago - Stars: 6 - Forks: 0

lure23/ZOO-esp32

[WIP] Collection of Sensors and Actuators, usable from Rust. Targets the RISC V based ESP32 MCUs.

Language: Rust - Size: 7.35 MB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

0ingchun/HHT_AutoConNet_nodemcu

使用esp系列單片機程序自動登錄【HuiHuTong】

Language: C++ - Size: 15.1 MB - Last synced at: 3 months ago - Pushed at: 8 months ago - Stars: 5 - Forks: 3

rallekralle11/flexypin_adapter_USB Fork of solderparty/flexypin_adapters_hw

FlexyPin adapter for the C3 and S3 wroom with USB port

Language: HTML - Size: 10 MB - Last synced at: 4 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

BunnySakura/EspNanoTool

一个使用ESP32系列芯片开发的小工具。| 合宙 ESP32C3-CORE 开发板和 0.96寸 屏幕拓展板 | M5Stack BASIC

Language: C - Size: 919 KB - Last synced at: about 1 month ago - Pushed at: 8 months ago - Stars: 7 - Forks: 1

Zxis233/My213EPD

使用ESP32C3开发的2.13寸三色墨水屏摆件/钥匙扣

Language: C - Size: 4.65 MB - Last synced at: 6 months ago - Pushed at: 6 months ago - Stars: 0 - Forks: 0

wot-rust/wot-esp-demo

Embedded demo based on esp32-c3

Language: Rust - Size: 20.5 KB - Last synced at: 2 months ago - Pushed at: 6 months ago - Stars: 4 - Forks: 1

gandro/micropython-m5stamp-c3u

Micropython modules for the M5Stamp C3U

Language: Python - Size: 39.1 KB - Last synced at: 21 days ago - Pushed at: about 2 years ago - Stars: 6 - Forks: 4

74th/esp32c3-iot-server-board

Board for converting Grove device to IoT Server using ESP32-C3-WROOM-02.

Size: 4.79 MB - Last synced at: 5 days ago - Pushed at: 8 months ago - Stars: 3 - Forks: 0

hexadecimal233/esp32c3-singing-stepper

电机报废计划（电机唱歌）

Language: Rust - Size: 65.4 KB - Last synced at: about 1 month ago - Pushed at: 6 months ago - Stars: 1 - Forks: 0

BunnySakura/lv_port_esp32c3

基于ESP-IDF v5.1.1，将LVGL v7.11.0 ~ v8.3.10 移植到合宙ESP32C3-CORE开发板，并适配合宙0.96寸屏幕拓展板。

Language: C - Size: 25.5 MB - Last synced at: about 1 month ago - Pushed at: over 1 year ago - Stars: 4 - Forks: 1

georgik/esp32-rust-multi-target-template

ESP32 Rust Bare Metal (no_std) Multi Target Template

Language: Rust - Size: 107 KB - Last synced at: about 1 month ago - Pushed at: about 2 years ago - Stars: 11 - Forks: 1

rallekralle11/Epi_C3

Language: HTML - Size: 50.7 MB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 7 - Forks: 2

phfbertoleti/pulse_counter_project_zephyr

Pulse counter project using Zephyr RTOS

Language: C - Size: 16.6 KB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 10 - Forks: 0

khoih-prog/AsyncMQTT_ESP32 📦

Arduino Library for ESP32/S2/S3/C3 asynchronous MQTT client implementation. This library, ported to support ESP32/S2/S3/C3, WT32_ETH01 (ESP32 + LAN8720), ESP32 using LwIP ENC28J60, W5500, W6100 or LAN8720. Supporting TLS/SSL for MQTTS Client

Language: C++ - Size: 1.42 MB - Last synced at: 2 months ago - Pushed at: over 2 years ago - Stars: 21 - Forks: 10

hnz1102/wakepcbox

Wake on LAN Controller Box

Language: Rust - Size: 1.69 MB - Last synced at: 2 months ago - Pushed at: 12 months ago - Stars: 1 - Forks: 0

edwardatki/Quectowatch

A WIP minimal smartwatch based on the ESP32-C3

Language: C - Size: 33.4 MB - Last synced at: 9 months ago - Pushed at: 9 months ago - Stars: 0 - Forks: 0

j0hax/c3dk Fork of cpq/mdk

A bare metal SDK for the ESP32-C3

Language: C - Size: 3.87 MB - Last synced at: 9 months ago - Pushed at: 9 months ago - Stars: 1 - Forks: 0

mboehmerm/Three-IPS-Displays-with-ST7789-170x320-240x280-240x320

Testing three cheap and fast ST7789 AliExpress IPS Displays with TFT_eSPI by Bodmer. Tested with ESP32, S2 mini, S3, C3, C3 Super Mini, C6 and RP2040 using board package esp32 3.0.3 .

Language: C++ - Size: 70.8 MB - Last synced at: 9 months ago - Pushed at: 9 months ago - Stars: 4 - Forks: 3

MPEasy-Org/MPEasy.github.io

Easy install for MicroPython on ESP32 family MCUs using web browser

Language: HTML - Size: 6.29 MB - Last synced at: 2 months ago - Pushed at: 9 months ago - Stars: 0 - Forks: 0

lnB51/spark

Turn on your PC via Telegram bot and ESP32

Language: Rust - Size: 307 KB - Last synced at: 28 days ago - Pushed at: 9 months ago - Stars: 2 - Forks: 0

mkjanke/ESP32-C3-Fanspeed 📦

Read two temperature sensors (DHT11 or DS18B20), set PWM fan speed based on temperature differential.

Language: C++ - Size: 43.9 KB - Last synced at: 9 months ago - Pushed at: 9 months ago - Stars: 1 - Forks: 2

AlexVakhnin/ESP32-C3-ADC-BLE-SENSOR

Terminal BLE sensor. Smart UPS for Orange Pi.

Language: C++ - Size: 2.35 MB - Last synced at: 9 months ago - Pushed at: 9 months ago - Stars: 1 - Forks: 1

andber1/esp-rs-demo

A simple STD binary for the development board ESP32-C3-DevKit-RUST

Language: Rust - Size: 58.6 KB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 0 - Forks: 0