mkuf/prind

print in docker - Deploy a containerized Klipper Stack for your 3D Printer

Language: Dockerfile - Size: 566 KB - Last synced at: about 21 hours ago - Pushed at: about 22 hours ago - Stars: 411 - Forks: 94

rootiest/zippy-klipper_config

Zippy Klipper Config

Language: Shell - Size: 26.7 MB - Last synced at: about 23 hours ago - Pushed at: 12 months ago - Stars: 437 - Forks: 51

T9Air/Klipper_Power_Resume

Allow Klipper controlled 3d printers to restart after a power loss or MCU disconnect

Language: Shell - Size: 351 KB - Last synced at: about 5 hours ago - Pushed at: about 6 hours ago - Stars: 33 - Forks: 0

TypQxQ/KTC

Klipper Toolchanger Code v.2

Language: Python - Size: 672 KB - Last synced at: 1 day ago - Pushed at: 4 months ago - Stars: 56 - Forks: 5

fluidd-core/fluidd

Fluidd, the klipper UI.

Language: Vue - Size: 19.1 MB - Last synced at: 1 day ago - Pushed at: 1 day ago - Stars: 1,520 - Forks: 474

smcneece/HAMMER

HAMMER – Home Assistant Moonraker Messaging & Event Relay

Size: 884 KB - Last synced at: 2 days ago - Pushed at: 2 days ago - Stars: 0 - Forks: 0

rootiest/printcfg

A suite of macros to enhance the klipper experience

Language: Shell - Size: 16.4 MB - Last synced at: about 23 hours ago - Pushed at: about 2 months ago - Stars: 105 - Forks: 15

3DCoded/3MS

Modular Multimaterial System for Klipper 3D Printers

Language: Python - Size: 360 MB - Last synced at: 2 days ago - Pushed at: 3 days ago - Stars: 88 - Forks: 10

jon-harper/OmniBox

Modular, 3D printable electronics case for 3D printers

Size: 511 MB - Last synced at: 3 days ago - Pushed at: 3 days ago - Stars: 68 - Forks: 5

DMontgomery40/mcp-3D-printer-server

Connects MCP to major 3D printer APIs (Orca, Bambu, OctoPrint, Klipper, Duet, Repetier, Prusa, Creality). Control prints, monitor status, and perform advanced STL operations like scaling, rotation, sectional editing, and base extension. Includes slicing and visualization.

Language: TypeScript - Size: 19.8 MB - Last synced at: 4 days ago - Pushed at: 11 days ago - Stars: 24 - Forks: 7

tommmyngo/voron-shenanigans

Voron 2.4 300m^3 configs

Size: 62.5 KB - Last synced at: 4 days ago - Pushed at: 4 days ago - Stars: 0 - Forks: 0

bofh69/spool2klipper

Moonraker agent to transfer Spoolman's spool's info to klipper when changing spool.

Language: Python - Size: 55.7 KB - Last synced at: 4 days ago - Pushed at: 4 days ago - Stars: 7 - Forks: 3

mainsail-crew/virtual-klipper-printer

Run a simulated Klipper 3D-Printer in a Docker container

Language: Shell - Size: 422 KB - Last synced at: 1 day ago - Pushed at: 5 months ago - Stars: 83 - Forks: 34

1coderookie/KobraGoNeoInsights

Comprehensive information about the Anycubic Kobra Go and Kobra Neo.

Language: HTML - Size: 25.8 MB - Last synced at: 5 days ago - Pushed at: 5 days ago - Stars: 92 - Forks: 9

1coderookie/Kobra2PlusInsights

Comprehensive information about the Anycubic Kobra 2 Plus.

Language: HTML - Size: 27.1 MB - Last synced at: 5 days ago - Pushed at: 5 days ago - Stars: 5 - Forks: 0

1coderookie/Kobra2Insights

Comprehensive information about the Anycubic Kobra 2.

Language: HTML - Size: 26 MB - Last synced at: 5 days ago - Pushed at: 5 days ago - Stars: 8 - Forks: 1

1coderookie/Kobra2MaxInsights

Comprehensive information about Anycubic's Kobra 2 Max.

Language: HTML - Size: 26.6 MB - Last synced at: 5 days ago - Pushed at: 5 days ago - Stars: 18 - Forks: 0

UlinProject/snapmaker-original

[in progress, 3D printer, info, experiment, mods] Information about this 3D printer (original Snapmaker), set of profiles, models, firmware and modifications

Size: 134 MB - Last synced at: 5 days ago - Pushed at: 5 days ago - Stars: 0 - Forks: 0

mainsail-crew/mainsail

Mainsail is the popular web interface for managing and controlling 3D printers with Klipper.

Language: Vue - Size: 25.3 MB - Last synced at: 5 days ago - Pushed at: 5 days ago - Stars: 1,861 - Forks: 418

marcolivierarsenault/moonraker-home-assistant

Home Assistant integration for Moonraker, Klipper and Mainsail

Language: Python - Size: 8.31 MB - Last synced at: 5 days ago - Pushed at: 5 days ago - Stars: 341 - Forks: 37

fdm-monster/fdm-monster

3D printer farm management platform for local or in-cloud usage using OctoPrint, Moonraker and PrusaLink.

Language: TypeScript - Size: 52.2 MB - Last synced at: 6 days ago - Pushed at: 6 days ago - Stars: 90 - Forks: 12

500Foods/Philement

A Klipper replacement! Well, eventually. In the shorter term it is more a collection of elements that will eventually come together to become a Klipper replacement.

Language: C - Size: 36.4 MB - Last synced at: 6 days ago - Pushed at: 6 days ago - Stars: 4 - Forks: 0

zales/creality2twitch

Stream Creality K1 webcam to Twitch, post Klipper status to chat, and update stream title

Language: Python - Size: 1.75 MB - Last synced at: 6 days ago - Pushed at: 6 days ago - Stars: 0 - Forks: 0

fabiomux/kde-servicemenus

My personal KDE service menus collection

Size: 181 KB - Last synced at: 7 days ago - Pushed at: 7 days ago - Stars: 42 - Forks: 8

Frix-x/klippain-shaketune

Klipper streamlined input shaper workflow and calibration tools

Language: Python - Size: 37.6 MB - Last synced at: 7 days ago - Pushed at: 7 days ago - Stars: 875 - Forks: 108

Tombraider2006/Ender5Max

helpfull manuals for user. config, mods, hacks

Language: Python - Size: 13.7 MB - Last synced at: 7 days ago - Pushed at: 7 days ago - Stars: 0 - Forks: 1

jbatonnet/Rinkhals

Custom firmware for the Anycubic Kobra series of 3D printers (Kobra 2 Pro, Kobra 3 and Kobra S1)

Language: Python - Size: 154 MB - Last synced at: 7 days ago - Pushed at: 7 days ago - Stars: 190 - Forks: 29

mainsail-crew/MainsailOS

This Raspberry Pi distribution for managing Klipper 3D printers with Mainsail provides all you need.

Language: Shell - Size: 9.17 MB - Last synced at: 1 day ago - Pushed at: 8 months ago - Stars: 606 - Forks: 295

QuinnDamerell/OctoPrint-OctoEverywhere

Cloud Empower Your OctoPrint, Klipper, Elegoo, & Bambu Lab 3D Printers. Secure Remote Access, AI Print Failure Detection, Real-time Notifications, Live Streaming, and More! 🚀

Language: Python - Size: 1.66 MB - Last synced at: 7 days ago - Pushed at: 8 days ago - Stars: 215 - Forks: 21

Disane87/spoolman-homeassistant

Spoolman home assistant integration 🏠

Language: Python - Size: 970 KB - Last synced at: 8 days ago - Pushed at: 8 days ago - Stars: 99 - Forks: 10

vladbabii/klippy-cnc

KCNC - Klipper CNC Macro Package

Language: Shell - Size: 125 KB - Last synced at: 7 days ago - Pushed at: almost 2 years ago - Stars: 130 - Forks: 29

SteveGotthardt/klipper Fork of Klipper3d/klipper

Klipper for 3d printer boards using HC32F460

Language: C - Size: 146 MB - Last synced at: about 21 hours ago - Pushed at: about 22 hours ago - Stars: 34 - Forks: 15

dw-0/kiauh

Klipper Installation And Update Helper

Language: Python - Size: 2.14 MB - Last synced at: 8 days ago - Pushed at: 11 days ago - Stars: 3,758 - Forks: 541

pedrolamas/docker-danger-klipper-simulavr

:package: Docker image for Danger Klipper with Simulavr, Moonraker, and mjpg-streamer

Language: Dockerfile - Size: 216 KB - Last synced at: 6 days ago - Pushed at: 10 days ago - Stars: 5 - Forks: 1

pedrolamas/docker-kalico-simulavr

:package: Docker image for Kalico with Simulavr, Moonraker, and mjpg-streamer

Language: Dockerfile - Size: 196 KB - Last synced at: 6 days ago - Pushed at: 10 days ago - Stars: 3 - Forks: 1

Gethe/klipper_config

A custom configuration for Klipper

Language: Shell - Size: 291 KB - Last synced at: 2 days ago - Pushed at: 10 days ago - Stars: 0 - Forks: 0

pedrolamas/docker-klipper-simulavr

:package: Docker image for Klipper with Simulavr, Moonraker, and mjpg-streamer

Language: Dockerfile - Size: 196 KB - Last synced at: 6 days ago - Pushed at: 10 days ago - Stars: 17 - Forks: 1

mainsail-crew/gb-docs

📖 Documentation for Mainsail - including step-by-step installation guides

Language: JavaScript - Size: 8.87 MB - Last synced at: 1 day ago - Pushed at: 11 days ago - Stars: 1 - Forks: 13

bassamanator/Sovol-SV06-firmware

🔥 A comprehensive Klipper configuration for a variety of 3D printers 🔥

Size: 7.8 MB - Last synced at: 11 days ago - Pushed at: 11 days ago - Stars: 951 - Forks: 79

nlef/moonraker-telegram-bot

Telegram bot to interact with Moonraker (Klipper Web API Server)

Language: Python - Size: 854 KB - Last synced at: 7 days ago - Pushed at: about 1 month ago - Stars: 278 - Forks: 71

Desuuuu/klipper-macros

A collection of my Klipper G-code macros.

Size: 23.4 KB - Last synced at: 11 days ago - Pushed at: almost 2 years ago - Stars: 294 - Forks: 52

KlipperScreen/KlipperScreen

GUI for Klipper

Language: Python - Size: 15.5 MB - Last synced at: 11 days ago - Pushed at: 19 days ago - Stars: 1,179 - Forks: 396

lulzbot3d/klipper Fork of Klipper3d/klipper

Klipper is a 3d-printer firmware

Language: C - Size: 74.8 MB - Last synced at: 7 days ago - Pushed at: 8 days ago - Stars: 0 - Forks: 0

jpcurti/E3V3SE_display_klipper

Python based interface for the Creality Ender 3 V3 SE display running Klipper

Language: Python - Size: 16.5 MB - Last synced at: 8 days ago - Pushed at: 11 months ago - Stars: 91 - Forks: 3

MSzturc/the100

THE 100 - The worlds fastest 3D Printer based on a printed frame

Size: 43.1 MB - Last synced at: 11 days ago - Pushed at: over 1 year ago - Stars: 1,027 - Forks: 76

EtteGit/EnragedRabbitProject

Language: Python - Size: 428 MB - Last synced at: 12 days ago - Pushed at: over 1 year ago - Stars: 2,483 - Forks: 338

ihrapsa/KlipperWrt

A guide to install Klipper with fluidd, Mainsail or Duet-Web-Control and webcam stream in OpenWrt. Mainly created around the Creality Wi-Fi box but any OpenWrt running device with similar specs will work just fine.

Language: Shell - Size: 161 MB - Last synced at: 6 days ago - Pushed at: 4 months ago - Stars: 187 - Forks: 39

pwlgrzs/awesome-resources-for-ender-3-v3-se

Your one-stop-shop for everything related to Ender 3 V3 SE!

Size: 567 KB - Last synced at: 4 days ago - Pushed at: over 1 year ago - Stars: 65 - Forks: 2

3DCoded/DynamicMacros

Never restart Klipper again for simple macros.

Language: Python - Size: 7.22 MB - Last synced at: 16 days ago - Pushed at: 16 days ago - Stars: 39 - Forks: 6

Staubgeborener/Klipper-Backup

Klipper-Backup is a script for manual or automated Klipper GitHub backups. It's lightweight, pragmatic and comfortable.

Language: Shell - Size: 3.27 MB - Last synced at: 5 days ago - Pushed at: 5 days ago - Stars: 377 - Forks: 65

EmperorArthur/klipper Fork of Klipper3d/klipper

Development Klipper For The Peopoly Magneto X

Language: C - Size: 27.6 MB - Last synced at: 11 days ago - Pushed at: 11 days ago - Stars: 0 - Forks: 0

S0ly/Anycubic-i3-Mega-upgrade

This repository serves as a comprehensive resource for enhancing your Anycubic i3 Mega 3D printer. The README contains all essential information for upgrading your printer, including links to STL files, detailed instructions, purchase recommendations, and more. It also features an optimized Klipper configuration file.

Size: 2.55 MB - Last synced at: 3 days ago - Pushed at: over 1 year ago - Stars: 12 - Forks: 0

dz0ny/klipper-prusa-mk3s

Structured Klipper config for Prusa MK3s 3D printer

Language: C - Size: 133 KB - Last synced at: 19 days ago - Pushed at: about 1 year ago - Stars: 232 - Forks: 53

3dwork-io/3dwork-klipper

Desde 3Dwork hemos recopilado y ajustando un conjunto de macros, configuraciones de máquinas y electrónicas, así como otras herramientas para una gestión sencilla y potente de Klipper. Gran parte de este paquete está basado en RatOS mejorando las partes que creemos interesantes, así como otras aportaciones de la comunidad.

Language: Shell - Size: 120 MB - Last synced at: 19 days ago - Pushed at: 19 days ago - Stars: 16 - Forks: 4

GadgetAngel/Voron2.4_My_Build_Log

This repository will hold any documents I use to help with building my Voron 2.4 250mm 3D Printer and the Voron 2.4 LDO 300mm Printer

Language: HTML - Size: 288 MB - Last synced at: 7 days ago - Pushed at: about 3 years ago - Stars: 97 - Forks: 16

GadgetAngel/voron2_settling_probe

A Klipper Extension for the Probe Obj that allows the first probe sample to be discarded from the following command: PROBE,PROBE_ACCURACY,PROBE_CALIBRATE,QUAD_GANTRY_LEVEL,BED_MESH_CALIBRATE,SCREWS_TILT_CALCULATE,Z_TILT_ADJUST,PROBE_Z_ACCURACY, and CALIBRATE_Z

Language: Python - Size: 52.7 KB - Last synced at: 7 days ago - Pushed at: about 2 years ago - Stars: 8 - Forks: 0

costas-basdekis/gcode-documentation

A module that parses user GCode, and annotates it with documentation

Language: TypeScript - Size: 1.9 MB - Last synced at: 23 days ago - Pushed at: 23 days ago - Stars: 3 - Forks: 0

pedrolamas/klipper-virtual-pins

:nut_and_bolt: Klipper virtual_pins module

Language: Python - Size: 17.6 KB - Last synced at: 6 days ago - Pushed at: 6 months ago - Stars: 33 - Forks: 6

lhndo/ResHelper

A series of scripts designed to streamline Klipper's resonance testing workflow.

Language: Python - Size: 395 KB - Last synced at: 26 days ago - Pushed at: 26 days ago - Stars: 122 - Forks: 17

DigitalArtifex/QKlipper

Qt based Klipper/Moonraker library

Language: C++ - Size: 14.6 MB - Last synced at: 27 days ago - Pushed at: 27 days ago - Stars: 3 - Forks: 1

tildebyte/Kingroon-KP3S-v1.3-and-friends

Personal repo for Kingroon KP3S, Klipper, OctoPrint, PrusaSlicer & friends

Size: 35.3 MB - Last synced at: 21 days ago - Pushed at: about 2 years ago - Stars: 19 - Forks: 1

nikhil-robinson/klipper_esp32

Klipper_ESP32 is an implementation of the Klipper protocol for Espressif's ESP32 microcontroller set.

Language: C - Size: 169 KB - Last synced at: 26 days ago - Pushed at: about 2 months ago - Stars: 39 - Forks: 7

scross01/prometheus-klipper-exporter

Prometheus Exporter for Klipper

Language: Go - Size: 6.11 MB - Last synced at: 16 days ago - Pushed at: 21 days ago - Stars: 60 - Forks: 13

joseto1298/klipper-printer-on-off

Plugin for Klipper that allows you to turn on and off the 3D printer using a smart plug.

Language: Python - Size: 44.9 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

klich3/klipper---adxl345-skr-mini-e3-v3.0

Different methods to connect ADXL345 to SKR MINI 3E v3

Size: 2.74 MB - Last synced at: 15 days ago - Pushed at: about 1 year ago - Stars: 20 - Forks: 1

cheadrian/kobra2neo-klipper

Klipper for Anycubic Kobra 2 Neo, OrcaSlicer profiles, add compatibility with KlipperScreen.

Language: Python - Size: 26.9 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 18 - Forks: 2

iamlite/WLED-Klipper-Helper

WLED-Klipper-Helper is a helper script that guides you through the process of integrating WLED with Klipper and Moonraker. It takes care of configuring Klipper and Moonraker, creating symlinks, and editing G-code macro files to automate WLED control.

Language: Shell - Size: 285 KB - Last synced at: 5 days ago - Pushed at: 11 months ago - Stars: 9 - Forks: 1

pedrolamas/klipper-preprocessor

:scroll: Klipper Preprocessor script for Cura

Language: Python - Size: 158 KB - Last synced at: 21 days ago - Pushed at: 2 months ago - Stars: 162 - Forks: 13

kForth/Klipper-Configs

Configurations for various printers running Klipper.

Size: 105 KB - Last synced at: 5 days ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

Desuuuu/DGUS-reloaded-Klipper 📦

DWIN T5UID1 touchscreen firmware for 3D printers running Klipper.

Language: Batchfile - Size: 989 KB - Last synced at: about 1 month ago - Pushed at: over 2 years ago - Stars: 172 - Forks: 39

jackw01/pi-pico-printer-board

Tinkerer-friendly Klipper compatible 3D printer control board using Raspberry Pi Pico

Size: 6.65 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 17 - Forks: 0

ValeriOS03/3D-Printing-

Personal Projects

Language: C++ - Size: 79 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 21 - Forks: 1

CharlieYu4994/SB_CAN

为 Voron Design 的 StealthBurner 设计的 CAN 总线工具头板

Size: 34.4 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 3 - Forks: 1

T9Air/klipper-camera-watchdog 📦

3d print error detector that catches errors before normal AI spaghetti detectors.

Language: Python - Size: 114 KB - Last synced at: about 1 month ago - Pushed at: 10 months ago - Stars: 10 - Forks: 1

pwlgrzs/ender3-v3-se-gitbook

Your one-stop-shop for everything related to Ender 3 V3 SE, but better!

Size: 18.6 KB - Last synced at: 5 days ago - Pushed at: about 1 year ago - Stars: 9 - Forks: 2

Qballjos/Voron-2.4-Otopus-pro-SB2209-U2C-CAN

Voron 2.4 R2 with ,Stealthburner, Voron Tap, Bambu lab Hotend. Octopus pro with TMC2209 UART, EBB SB2209 v1.0 and U2C v2.1 running klipper

Size: 221 MB - Last synced at: about 3 hours ago - Pushed at: about 2 years ago - Stars: 20 - Forks: 0

garethky/klipper-voron2.4-config

Klipper Config for my Voron 2.4

Language: G-code - Size: 895 KB - Last synced at: 19 days ago - Pushed at: 19 days ago - Stars: 100 - Forks: 11

suchmememanyskill/CYD-Klipper

An implementation of a wireless Klipper, Bambu and Octoprint status display on an ESP32 + screen

Language: C++ - Size: 17.4 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 305 - Forks: 40

VinnyCordeiro/BT_DC_motor_board

BoxTurtle DC motors standalone board

Size: 13.6 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 2 - Forks: 0

Desuuuu/DGUS-reloaded-Klipper-config 📦

Size: 43 KB - Last synced at: about 1 month ago - Pushed at: over 3 years ago - Stars: 44 - Forks: 23

billkenney/revert_qidi_software

revert klipper and moonraker to working versions from qidi’s repo, and install the latest working version of fluidd

Language: Shell - Size: 63.6 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 12 - Forks: 2

jakpaul/klipper-status-led

Klipper state-independent neopixel status LED on Raspberry Pi

Language: Python - Size: 23.4 KB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 0 - Forks: 0

500Foods/WelcomeToTroodon

Ideas for what to get in advance of the arrival of your new Troodon 3D printer, or for anyone with a 3D printer that wants some ideas about where to start.

Language: Shell - Size: 3.22 MB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 13 - Forks: 2

Dids/klipper-priority-fix

A simple but hacky workaround for raising Klipper service priorities on lower end SBCs like BTT-CB1, to avoid timeouts and failed prints.

Language: Shell - Size: 23.4 KB - Last synced at: about 3 hours ago - Pushed at: over 1 year ago - Stars: 10 - Forks: 1

PitHerm/Arduino_Ide

Tools and Files used with Arduino ide

Language: C++ - Size: 42 KB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

1coderookie/AnycubicTrigorillaInsights

Information about the Trigorilla mainboards being used in Anycubic's 3D FDM printers.

Language: HTML - Size: 3.65 MB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

1coderookie/Kobra2NeoInsights

Comprehensive information about the Anycubic Kobra 2 Neo.

Language: HTML - Size: 24.4 MB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 32 - Forks: 3

1coderookie/Kobra2ProInsights

Comprehensive information about the Anycubic Kobra 2 Pro.

Language: HTML - Size: 31.8 MB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 41 - Forks: 2

alexjohnj/klipper_config

Klipper Configuration for my printers

Language: Shell - Size: 97.7 KB - Last synced at: 10 days ago - Pushed at: about 1 month ago - Stars: 3 - Forks: 0

ZoesDev/klipperConfigs

My printer configs for klipper

Size: 40 KB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

T4skor/Hotend-Neopixel-Control-Macro

Neopixel Control for Klipper

Size: 17.6 KB - Last synced at: about 1 month ago - Pushed at: 2 months ago - Stars: 1 - Forks: 0

shubham0x13/ender-3-v3-se-klipper

Klipper configuration and macros for the Ender 3 V3 SE

Size: 7.81 KB - Last synced at: 2 months ago - Pushed at: 4 months ago - Stars: 9 - Forks: 2

PowerCmptr/Laggy_Klipper

DIY Assistant with knob support for Anycubic Kobra 2 neo screen via Raspberry Pi + Klipper

Language: Python - Size: 65.4 KB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

1coderookie/Klipper4Kobra2series

Collection of printer.cfg files for Anycubic Kobra 2 series models.

Size: 278 KB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 38 - Forks: 3

dinosauria123/StacKlipper

Wireless remote controller for Klipper 3D printers

Language: C++ - Size: 44.9 KB - Last synced at: about 1 month ago - Pushed at: over 3 years ago - Stars: 25 - Forks: 1

Thinkersbluff/DGUS-Reloaded_for_CR6-DWIN-SET_Component Fork of Desuuuu/DGUS-reloaded-Klipper

Forks the Desuuuu DWIN T5UID1 touchscreen firmware, and refactors it for use on the CR6 T5L DWIN display . Must be used with the modified Klipper from https://github.com/Thinkersbluff/DGUS-Reloaded_for_CR6-Klipper_Component

Language: PowerShell - Size: 160 MB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 25 - Forks: 4

bofh69/nfc2klipper

Integrate Spoolman & Klipper via nfc/rfid tags on spools

Language: Python - Size: 76.2 KB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 33 - Forks: 4

SnakeOilXY/SnakeOil-XY

Fully open source configurable high speed CoreXY 3D printer.

Language: HTML - Size: 3.84 GB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 353 - Forks: 37

leadustin/QIDI-up2date-english

Update of the Qidi Series 3

Language: Shell - Size: 5.15 MB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 41 - Forks: 3

zech/klipper_config

Voron 2.4 350mm³ Klipper Configuration

Language: Shell - Size: 976 KB - Last synced at: about 17 hours ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0