Infineon/mtb-example-pmg1-usbpd-sink-dps310-i2c-sensor

Language: C - Size: 688 KB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 2 - Forks: 0

Infineon/mtb-example-pmg1-watchdog-timer

Language: C - Size: 87.9 KB - Last synced at: about 1 month ago - Pushed at: 7 months ago - Stars: 1 - Forks: 0

Infineon/mtb-example-pmg1-8-bit-saradc-basic

Language: C - Size: 323 KB - Last synced at: 3 months ago - Pushed at: 7 months ago - Stars: 2 - Forks: 0

Infineon/mtb-example-pmg1-on-chip-temp-sensor-8-bit-saradc

Language: C - Size: 237 KB - Last synced at: 23 days ago - Pushed at: 7 months ago - Stars: 3 - Forks: 0

Infineon/mtb-example-pmg1-hello-world

This code example demonstrates simple UART communication by printing a "Hello World" message on a terminal and blinking an LED using Power Delivery Microcontroller Generation 1(PMG1) devices.

Language: Makefile - Size: 113 KB - Last synced at: 3 months ago - Pushed at: 12 months ago - Stars: 1 - Forks: 2

Infineon/mtb-example-pmg1-usbpd-sink-pps

Language: C - Size: 712 KB - Last synced at: 6 months ago - Pushed at: 6 months ago - Stars: 0 - Forks: 1

Infineon/mtb-example-pmg1-usbpd-sink-lcd-display

Language: C - Size: 839 KB - Last synced at: 6 months ago - Pushed at: 6 months ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-12-bit-saradc-basic

Language: C - Size: 1.04 MB - Last synced at: 3 months ago - Pushed at: 7 months ago - Stars: 1 - Forks: 0

Infineon/mtb-example-pmg1-i2c-slave-led

Language: C - Size: 260 KB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-flash-write

Language: C - Size: 89.8 KB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 0 - Forks: 1

Infineon/mtb-example-pmg1-led-sw-interface

This code example demonstrates a simple switch and LED interface on EZ-PD™ PMG1 MCU devices.

Language: Makefile - Size: 402 KB - Last synced at: 3 months ago - Pushed at: 7 months ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-pwm-led

Language: C - Size: 166 KB - Last synced at: about 2 months ago - Pushed at: 7 months ago - Stars: 1 - Forks: 0

Infineon/mtb-example-pmg1-critical-section

Language: C - Size: 73.2 KB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-usbpd-sink-freertos

This example demonstrates USBPD Sink operation using FreeRTOS and logs scheduling behavior.

Language: C - Size: 388 KB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 1 - Forks: 0

Infineon/mtb-example-pmg1-usbpd-sink-capsense

This code example demonstrates USB Type-C attach detection and USB Power Delivery contract negotiation using EZ-PD™ PMG1 MCU devices. The code example also features a 5-segment CAPSENSE™ slider and two CAPSENSE™ buttons. Each CAPSENSE™ sensor toggles an LED based on the touch input from the user.

Language: C - Size: 517 KB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 1 - Forks: 2

Infineon/mtb-example-pmg1-usbpd-sink

This code example demonstrates USB-C attach detection and USB Power Delivery contract negotiation using PMG1 devices.

Language: C - Size: 316 KB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 1 - Forks: 3

Infineon/mtb-example-pmg1-empty-app

This empty application provides a template for creating applications using Power Delivery Microcontroller Generation 1 (PMG1) devices.

Language: Makefile - Size: 18.6 KB - Last synced at: 3 months ago - Pushed at: about 1 year ago - Stars: 1 - Forks: 0

Infineon/mtb-example-pmg1-capsense-csd-button-tuning

This code example demonstrates how to manually tune a CAPSENSE™ Sigma Delta (CSD)-based button widget in EZ-PD™ PMG1-S3 device using the CAPSENSE™ Tuner.

Language: C - Size: 1.11 MB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-capsense-csd-slider-tuning

Language: C - Size: 1.46 MB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-uvov-blocks

Language: C - Size: 317 KB - Last synced at: over 1 year ago - Pushed at: about 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-usbfs-vendor-interface

This code example demonstrates how to configure the USB block on EZ-PD™ PMG1 MCU as a vendor interface. When configured for vendor interface, the EZ-PD™ PMG1 MCU device enumerates as Cypress FX3 USB BulkloopExample Device, which can be read and written using a USB Control Center on a PC.

Language: C - Size: 731 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-usbfs-uart-dma

Language: C - Size: 798 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-usbfs-msc-fs-sram

Language: C - Size: 1.24 MB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-usbfs-cdc

Language: C - Size: 292 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-usbfs-billboard

This code example demonstrates how to configure the USB block on PMG1 MCU as a Billboard device.

Language: C - Size: 569 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-usb-hid-mouse

This example demonstrates how to configure the USB block on PMG1 MCU as a Human Interface Device (HID). The device enumerates as a 3-button mouse.

Language: C - Size: 60.5 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-uart-transmit-receive-dma

Language: C - Size: 750 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-uart-echo

Language: Makefile - Size: 117 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-spi-slave

Language: C - Size: 202 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-spi-master-dma

Language: C - Size: 286 KB - Last synced at: over 1 year ago - Pushed at: about 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-spi-master

Language: C - Size: 215 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-power-modes

Language: C - Size: 367 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 1

Infineon/mtb-example-pmg1-opamp-buffer-saradc

Language: C - Size: 399 KB - Last synced at: over 1 year ago - Pushed at: almost 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-opamp-amplifier-saradc

Language: C - Size: 1.25 MB - Last synced at: over 1 year ago - Pushed at: almost 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-on-chip-temp-sensor-12-bit-saradc

Language: C - Size: 556 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 1 - Forks: 0

Infineon/mtb-example-pmg1-ocp-scp-rcp

Language: C - Size: 462 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-multiple-gpio-interrupts

This code example demonstrates a method to detect multiple GPIO interrupts on the same port of EZ-PD™ PMG1 MCU devices. Detect multiple GPIO interrupts from the same port using the pin status bits of a port.

Language: C - Size: 58.6 KB - Last synced at: over 1 year ago - Pushed at: about 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-i2c-multi-master

Language: C - Size: 340 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-i2c-eeprom

Language: C - Size: 396 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-dfu-bootloader

mtb-example-pmg1-dfu-bootloader

Language: C - Size: 134 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-dfu-blinky-led

Language: C - Size: 70.3 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-ctbm-opamp-comparator

Language: C - Size: 809 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-crypto-trng

This code example demonstrates how to generate a 4-byte one-time password (OTP) with the true random number generation feature using the Cryptographic hardware block in PMG1 MCU. The generated OTP is displayed on a UART terminal emulator in hexadecimal format.

Language: C - Size: 77.1 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

Infineon/mtb-example-pmg1-counter-led

Language: C - Size: 162 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0