gitlab.com topics: CAN
py_ren/pyren
CAN K-Line diagnostic program, ELM327
Last synced at: about 2 years ago - Stars: 49 - Forks: 33
georgetsag/librecan
Library for generic CANbus usage
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
hjoertel/can4linux
can4linux is a Linux device driver for the CAN bus. It supports various CAN interface boards dor classic CAN and CAN FD
Last synced at: over 2 years ago - Stars: 4 - Forks: 4
wojrus-projects/altium-designer/canusb_m01_v1_0
USB 2.0 to CAN-FD interface with galvanic isolation.
Last synced at: about 2 years ago - Stars: 0 - Forks: 0
martin.stejskal/octahackcan
Device that allows to lock and unlock Skoda Octavia U1 via comfort CAN bus. It also allow work as low-performance sniffer and injector for CAN bus.
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
chrisvgt/obdcanbus
The OBDCANBUS project is intended to establish communication with CAN-capable devices or vehicles (e.g. cars). and read out data from them, process it and make it available to the user.
Last synced at: almost 3 years ago - Stars: 0 - Forks: 0
echoii/dkms/ixxat-socketcan
Ixxat SocketCAN Driver for Linux
Last synced at: over 2 years ago - Stars: 1 - Forks: 1
TERMIN36/relayblockx16
Прошивка для микроконтроллера на базе STM32F103C8T6 на базе HAL. Поддержка 16 реле, UART, I2C, CAN
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
rust-daredevil-group/daredevil-small
Crate for the sensor array module, the *light*/*small* EVITA module, deployed on two NXP S32K144-Q100 boards. Reads sensor data and safely propagates this over CAN-FD to a *medium* EVITA module.
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
avans-mariteam/qt-rpi-display
Qt program to run on Raspberry Pi with telemetry system.
Last synced at: over 2 years ago - Stars: 0 - Forks: 1
feesmrt/ros_serial_can_interface
ROS packages containing firmware and ROS-nodes to set up a ROS<->CAN-Interface.
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
