gitlab.com topics: openscad
lmtreser/disenos-3d
Diseños y trabajos en 3D
Last synced at: almost 2 years ago - Stars: 0 - Forks: 0
tue-umphy/co2mofetten/hardware/screw-tube
A configurable tube with screws
Last synced at: about 2 years ago - Stars: 0 - Forks: 0
kevinsumner/3d-designs
3D Designs, primarily intended to be 3D printed and used on RC FPV aircraft.
Last synced at: about 2 years ago - Stars: 0 - Forks: 0
tue-umphy/co2mofetten/hardware/stage-clamp
A customizable, 3D-printable multi-purpose clamp
Last synced at: about 2 years ago - Stars: 0 - Forks: 0
gfauredev/fingertipsforce
Searching for an optimal way of getting input from humans fingers to computers.
Last synced at: over 2 years ago - Stars: 1 - Forks: 0
mispcb/misopenscad
Objetos parametricos para uso de electronica.
Last synced at: over 2 years ago - Stars: 0
eike-welk-projects/3d-print/electronics-enclosure
This is a small, fully parametric, electronics enclosure, that can be 3D printed. It is very well vented, and is therefore suitable for power supplies. The enclosure is written in the CAD language OpenSCAD.
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
tue-umphy/instruments/lab-hook
Useful hooks for use in our labs
Last synced at: almost 3 years ago - Stars: 0 - Forks: 0
dulios/3d
Misc files related to 3d printing.
Last synced at: almost 3 years ago - Stars: 0 - Forks: 0
tue-umphy/co2mofetten/hardware/screwcap
A customizable threaded cap for waterproof cables
Last synced at: almost 3 years ago - Stars: 1 - Forks: 0
a1s0/storage-case-base-template
I wanted to organize my drawer space and reuse my excess Harbor Freight/Sortimo storage bins, so I created this SCAD model called the storage case base template (SCBT). Related blog post: https://alansolidum.com/posts/storage-case-base-template/
Last synced at: almost 3 years ago - Stars: 0 - Forks: 0
yannickbattail/custom-lightsaber
a custom lightsaber made with openSCAD
Last synced at: almost 3 years ago - Stars: 0 - Forks: 0
tue-umphy/co2mofetten/hardware/fixture-board
A simple customizable fixture board
Last synced at: about 2 years ago - Stars: 0 - Forks: 0
evils/thick_plate
millable 3D model of a thick plate for MX compatible switches for mechanical keyboards
Last synced at: almost 3 years ago - Stars: 0 - Forks: 0
okdv/shell-buildout
CAD design for my camper shell setup : )
Last synced at: almost 3 years ago - Stars: 0 - Forks: 0
sentiomnen/mechanisms
Implementation of the classic technical reference 507 Mechanical Movements by Henry T. Brown with OpenSCAD
Last synced at: almost 3 years ago - Stars: 0 - Forks: 0
nobodyinperson/leg-extension
Customizable extension for bed/table/furniture legs
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
olivierlenoir/NotchBox
Notch box using openSCAD for laser cut
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/washer
Customizable simple washers
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
drakelabs/hw/solid-models/c_radial_metal_mmr_3d
OpenSCAD library for creating epoxy-dipped metal film capacitors from Illinois/Cornell-Dubilier.
Last synced at: almost 3 years ago - Stars: 0 - Forks: 0
tue-umphy/co2mofetten/hardware/radiation-shield
A simple customizable radiation shield
Last synced at: about 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/curtain-rod-holder
A customizable curtain rod holder
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
hajnyon/3d-print-models
OpenSCAD models for 3D printing. https://www.prusaprinters.org/social/192244-hajnyon/prints
Last synced at: almost 3 years ago - Stars: 0 - Forks: 0
nobodyinperson/drip-off-grid
A customizable drip-off-grid for vegetable boxes
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/rounded-stand
A simple stand for rounded things
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/lock-plate
A plate to adjust the depth of one of my locks
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/friction-knob
A simple friction-fit turnable knob
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/lab-rail-filament-holder
A quick'n'dirty lab rail filament holder
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/trash-bin-addons
A rim and bottom platform for one of these long biological waste containers
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/hair-dryer-cap
Hair dryer back cap
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/screw-container
A customizable screw container for printing in spiral vase mode
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/3d-qr-code
3D printing a QR code
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/shower-basket
A shower basket and bracket to fit on a hansgrohe Unica shower head rail.
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/drawer-rail
A customizable small drawer rail
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/collar-stiffener
A customizable collar stiffener
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/cnc-bit-fan
A customizable fan for CNC bits
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
nobodyinperson/hose-adapter
A customizable 2-to-1 angled hose adapter
Last synced at: over 1 year ago - Stars: 1 - Forks: 0
nobodyinperson/shelfpin
Customizable Shelf Pin 🗄️
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
arielmartinperez/qwagraphs
A series of applications (Processsing, OpensScad) to easily create bar infographics.
Last synced at: about 2 years ago - Stars: 0 - Forks: 0
KOLANICH/mol2scad.py
A tool to render mol and sdf files to OpenSCAD
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
drz-openscad/modular-desk-stands
modular-desk-stands (hexagonal by default, but more !)
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
theAssociationOfMadScientists/cad_spool
A simple spool for wire that I designed. Individually, the outer and inner diameters of the spool, the hole size, the size of the outside rim, the wall thickness, and the number and size of spokes can be quickly adjusted by changing variables.
Last synced at: over 2 years ago - Stars: 0 - Forks: 0
Cdriko/openscad-Shelves
modules for building shelves and sliceforms with openscad
Last synced at: over 2 years ago - Stars: 1 - Forks: 0