gitlab.com topics: sensor

Repositories

tendsinmende/mpr121-hal

A mpr121 rust implementation for the embedded-hal family.

Last synced at: 3 months ago - Stars: 1 - Forks: 1

sand7/sand

Last synced at: 2 months ago - Stars: 1 - Forks: 0

christoph.strehse/openaquasense

OpenAquaSense is a sensor platform developed for tailor made marine monitoring applications

Last synced at: about 2 years ago - Stars: 0 - Forks: 0

The IoT Stack for ESP32 and Pi-Pico allows to build a sensor / actuator integrated into the (home) network with only a few lines of code. It uses AsyncIO and uses a so called service handler to ensure long term stable resilient operation.

Last synced at: over 1 year ago - Stars: 1 - Forks: 0

ciscojmg/sensor-langte

Test de sensor modbus

Last synced at: about 2 years ago - Stars: 0 - Forks: 0

raupulus/arduino-nano-project-clock

Proyecto de reloj con lectura de presión y temperatura en un arduino nano

Last synced at: over 2 years ago - Stars: 1 - Forks: 0

raupulus/esp32-smart-bonsai

Proyecto para automatizar el cuidado básico de un bonsai controlando humedad ambiente, humedad en la tierra, riego y luz recibida.

Last synced at: over 1 year ago - Stars: 1 - Forks: 0

raupulus/raspberry-sensor-cjmcu-as3935

Repositorio para controlar por i2c el sensor CJMCU 3935 con el chip AS3935. Este chip se utiliza para detectar rayos y la distancia de estos.

Last synced at: over 2 years ago - Stars: 1 - Forks: 0

raupulus/raspberry-sensor-bme680

Código para controlar el sensor bosh bme-680 desde una raspberry usando python

Last synced at: over 2 years ago - Stars: 1 - Forks: 0

raupulus/raspberry-sensor-veml6075

Clase para integrar el sensor VEML6075 con python en aplicaciones fácilmente con métodos para obtener valores y estructura para generar dinámicamente su tabla con SQLAlchemy. Mide: - Índice UV - UVA - UVB

Last synced at: over 2 years ago - Stars: 1 - Forks: 0

raupulus/raspberry-sensor-cjmcu811

Clase para integrar el sensor CJMCU-811 con python en aplicaciones fácilmente con métodos para obtener valores y estructura para generar dinámicamente su tabla con SQLAlchemy. Mide: - CO2 → Concentración de CO2 - TVOC → Compuestos orgánicos volátiles

Last synced at: over 2 years ago - Stars: 1 - Forks: 0

raupulus/raspberry-sensor-veml6070

Repositorio con modelo y ejemplos para el sensor VEML6070 que obtiene valores UV de la luz en el ambiente.

Last synced at: over 2 years ago - Stars: 1 - Forks: 0

raupulus/raspberry-sensor-anemometer

Control de anemómetro con la raspberry pi 4 utilizando GND+GPIO para contar los pulsos y sacar la velocidad del viento a partir de ello.

Last synced at: over 2 years ago - Stars: 1 - Forks: 0

raupulus/raspberry-sensor-bh1750

Repositorio con script y clases para trabajar fácilmente con el sensor de cantidad de luz que tiene el chip bh1750

Last synced at: over 2 years ago - Stars: 1 - Forks: 0

raupulus/raspberry-project-weather-station

Proyecto de estación meteorológica con Raspberry Pi

Last synced at: over 2 years ago - Stars: 1 - Forks: 0

bvhest/meshed-up-heart-beat

Code voor een meet-up met wat IoT hardware, sensors, mesh-netwerk, data analyse en visualisatie.

Last synced at: over 2 years ago - Stars: 0 - Forks: 1

tue-umphy/co2mofetten/software/python3-sensemapi

Python package to access the OpenSenseMap API (https://docs.opensensemap.org)

Last synced at: over 2 years ago - Stars: 1 - Forks: 2

norbertwalter67/Windsensor_WiFi_1000

The Windsensor WiFi 1000 is an OpenSource project (DIY) to build a wind transducer using homemade 3D printer parts and an ESP8266 microcontroller. Are all parts are OpenSource: 3D-CAD files, electronic circuit, software and documentation.

Last synced at: over 2 years ago - Stars: 8 - Forks: 6

C-X1/fuzebox

Reading ADC for multiple current and voltage sensors

Last synced at: over 1 year ago - Stars: 0 - Forks: 0

haadr/mastercode

Last synced at: over 2 years ago - Stars: 0 - Forks: 0

thomasdwidinata/iot-envirosense

Programming Internet of Things (COSC 2674) course first assignment about environment sensing using Raspberry Pi.

Last synced at: over 2 years ago - Stars: 0 - Forks: 0

deadlockz/BMP280-arduino-stuff

some tests to use the BMP280 pressure sensor with an arduino and a i2c display. I add some pressure changes as weather forcast :-D it is still a test

Last synced at: over 2 years ago - Stars: 0 - Forks: 0

tendsinmende/fs1027-dg-hal

FS1027-DG Gas Flow Sensor Module driver for no_std embedded-hal

Last synced at: 3 months ago - Stars: 0 - Forks: 0

micro-iot-platform/projects/temp-humidity-monitor

IoT based Temperature Humidity Monitor is a project designed to measure ambient Temperature and Humidity. This project uses a DHT22 Sensor to monitor the ambient Temperature and Humidity of any location and report it to the server over the internet.

Last synced at: over 2 years ago - Stars: 10 - Forks: 1

micro-iot-platform/projects/light-presence-detector

IoT Light Presence Detector is a project designed to detect the presence of light. This project uses a LDR (Light Dependent Resistor) to detect the presence of light and reports the data to the server over the internet.

Last synced at: over 2 years ago - Stars: 12 - Forks: 1

simplemicrocontrollers/fantube

Device that regulates fan speed and damper in the tube depending on temperature

Last synced at: almost 3 years ago - Stars: 0 - Forks: 0

chrisduf/bme680-iaq

Prototyping Indoor Air Quality environmental applications with Zephyr-RTOS, BME680 sensors, and Bosch Sensortec Environmental Cluster IAQ solution.

Last synced at: almost 3 years ago - Stars: 0 - Forks: 0

IT-Berater/twco2sensor-mh-z19b

Kicad CO2-Sensor lib für MH-Z19B.

Last synced at: about 2 years ago - Stars: 1 - Forks: 1

elichens/berry-python-samples

Python librarby to interact with eLichens sensors

Last synced at: almost 3 years ago - Stars: 0 - Forks: 0

visatu/bme280_forcedmode

Library for forced mode usage of the BME280.

Last synced at: almost 3 years ago - Stars: 0 - Forks: 0

deadlockz/justbiketacho

Build your own bicycle tacho with arduino pro mini, TM1637 LED Display (4digits, 7 segments) and a hall effect sensor 49E 822 8G. Code is for km/h - nothing more!

Last synced at: over 2 years ago - Stars: 0 - Forks: 0

quizilkend/lueftungs-ampel

Arduino-Projekt zum Messen der Luftgüte mittels des MQ-135 Sensors und Anzeige über eine RGB-LED ob Lüften notwendig ist.

Last synced at: about 2 years ago - Stars: 0 - Forks: 0

evils/frankensense

networked temperature sensor

Last synced at: over 2 years ago - Stars: 1 - Forks: 0

behametrics/logger-android

Data logging library for Android apps (touch, sensors and more)

Last synced at: over 1 year ago - Stars: 0 - Forks: 0

go-commons/delftopenhardware/Air-Quality-sensor-for-workspaces

An air quality sensor which monitors air quality in a workspace, together with a history graph

Last synced at: over 2 years ago - Stars: 1 - Forks: 1

MiniVP/Pan

Single-sensor autonomous weather data recorders

Last synced at: over 1 year ago - Stars: 0 - Forks: 0

micro-iot-platform/projects/motion-detector

IoT based Motion Detector is a simple project designed to detect the motion of any object. This project uses a HC-SR501 PIR Motion Detector Sensor to detect the motion of an object and provides the data over the internet.

Last synced at: over 2 years ago - Stars: 13 - Forks: 1

arobinel/django-rpi-sensors-manager

a django app to manage sensors on a raspberry pi and collect data from said sensors into a database, for use with grafana, export for machine learning purposes, or anything else.

Last synced at: over 2 years ago - Stars: 0 - Forks: 1

behametrics/logger-web

Data logging library for web sites and apps (mouse, touch, sensors and more)

Last synced at: 2 months ago - Stars: 0 - Forks: 1

Idosens/protocole-idosens-solo

Last synced at: over 2 years ago - Stars: 0 - Forks: 0

neueraeumexyz/latenzia

latenzia is a multisensory Virtual Reality (VR) installation designed to demonstrate the critical role of human proprioception and tactility in creating a synaesthetic world access.

Last synced at: over 2 years ago - Stars: 0 - Forks: 0