CFDBY/NACA-2412-Airfoil-Stall-Analysis-CFD-and-MATLAB

Investigates NACA 2412 airfoil aerodynamics using ANSYS Fluent CFD and MATLAB. Analyzes lift/drag coefficients across AoA to identify stall angle. Uses ~120k quad mesh, k-omega SST model. MATLAB applies Thin Airfoil Theory. CFD captures post-stall behavior (~12°). Includes animations, residuals, Cl/Cd plots.

Language: MATLAB - Size: 14.1 MB - Last synced at: 20 days ago - Pushed at: 20 days ago - Stars: 0 - Forks: 0

CFDBY/Comparative-Cooling-Analysis-Wind-2-m-s-vs.-Water-Flow-1-m-s-

This CFD analysis investigates and compares the thermal performance of a panel cooled by **air flow at 2 m/s** (previous study) and **water flow at 1 m/s** (this current study). The focus is on evaluating the improvement in cooling when the same heat load is applied to the system but different cooling mediums are used.

Size: 390 KB - Last synced at: 22 days ago - Pushed at: 22 days ago - Stars: 0 - Forks: 0

CFDBY/PV-Panel-Cooling-with-Air-Flow

A computational fluid dynamics (CFD) study simulating air-cooling effects on a photovoltaic panel under 800 W/m² solar load, implemented in ANSYS Fluent using SST k-ω turbulence modeling with 60,000+ mesh elements.

Language: MATLAB - Size: 567 KB - Last synced at: 5 days ago - Pushed at: 23 days ago - Stars: 0 - Forks: 0

hpjeonGIT/Tips

Some examples for various purposes

Language: Python - Size: 630 KB - Last synced at: 24 days ago - Pushed at: 24 days ago - Stars: 4 - Forks: 3

CFDBY/2D-Solar-Chimney-Analysis

This project presents a 2D computational fluid dynamics (CFD) simulation of airflow through a chimney structure. The analysis investigates velocity and pressure distribution patterns under steady-state conditions.

Size: 0 Bytes - Last synced at: 25 days ago - Pushed at: 25 days ago - Stars: 0 - Forks: 0

CFDBY/Supersonic-Flow-Analysis-of-a-Bullet

To model supersonic flow around a bullet, calculate Cd and drag forces using MATLAB, and validate these with Fluent CFD simulations, comparing analytical and numerical approaches for accuracy.

Language: MATLAB - Size: 2.21 MB - Last synced at: 5 days ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

CFDBY/Building_Vortex_Shedding_Analysis

Analyzes vortex shedding & wind loads on Ping An Finance Center via ANSYS Fluent. 2D model, 417k-element mesh, k-omega SST, PISO solver. Flow at 15-25 m/s yields ~0.04 Hz vortex frequency, ~2.4 drag coefficient. Uses CFD. Aligns with aerodynamic research.

Size: 5.4 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

precice/fluent-adapter

preCICE-adapter for the CFD code ANSYS Fluent (currently unmaintained)

Language: C - Size: 552 KB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 31 - Forks: 15

asharahmedjaved/Formula-Student-FS-Car-Design-Project

The project focuses on creating a high-performance, lightweight, and aerodynamically efficient vehicle using advanced 3D modeling, simulation, and optimization techniques.

Size: 6.84 KB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 0 - Forks: 0

jrwrigh/fluent_colormaps

Scientific colormaps for ANSYS Fluent

Language: Python - Size: 6.59 MB - Last synced at: 3 months ago - Pushed at: over 5 years ago - Stars: 18 - Forks: 6

ggrimard/ANSYSfluent

read ANSYS fluent case and data files

Language: Python - Size: 15.6 KB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 2 - Forks: 0

undimmable/hydroaerodynamics

Collection of OpenFOAM solvers and cases

Language: C++ - Size: 131 MB - Last synced at: about 1 year ago - Pushed at: about 6 years ago - Stars: 0 - Forks: 0

KeepFloyding/Toolkit-CFD

Ansys Fluent case generation and post-processing files.

Language: Python - Size: 6.84 KB - Last synced at: over 1 year ago - Pushed at: about 8 years ago - Stars: 5 - Forks: 3

c-schubert/fluent_udf_vof_droplet_detection

UDF for droplet detection and localisation of phase areas in Multiphase VoF (Volume of Fluid) ANSYS Fluent cases.

Language: C - Size: 27.3 KB - Last synced at: over 1 year ago - Pushed at: over 5 years ago - Stars: 12 - Forks: 4

c-schubert/fluent_colormaps

Additional colormaps in ANSYS Fluent scheme format

Size: 120 KB - Last synced at: over 1 year ago - Pushed at: almost 5 years ago - Stars: 1 - Forks: 0

c-schubert/vof-phase-coupling-library

Small UDF (C) library, which can be used to couple between Ansys Fluent and Ansys Mechanical APDL for multiphase Volume of Fluid (VoF) calculations

Language: C - Size: 45.9 KB - Last synced at: over 1 year ago - Pushed at: almost 5 years ago - Stars: 4 - Forks: 2

DavidL-Engineering/Project-Liber

ANSYS Fluent setup, data export, data scraping, and Google Sheet formatting

Language: Python - Size: 105 KB - Last synced at: over 1 year ago - Pushed at: over 4 years ago - Stars: 0 - Forks: 1

DavidL-Engineering/Project-Minerva

All-in-one CFD simulation, data processing, and post-processing automation for ANSYS 2020 R1

Language: Python - Size: 924 KB - Last synced at: over 1 year ago - Pushed at: over 3 years ago - Stars: 9 - Forks: 1

siramirsaman/Contact-Angle

Dynamic contact angle for droplet impact (UDF for fluent)

Language: C - Size: 7.81 KB - Last synced at: over 1 year ago - Pushed at: almost 7 years ago - Stars: 14 - Forks: 8

Aayush-patel-1696/Essential-of-Turbulence

This repository contains the simulations of orificemeter using Ansys Fluent. Comapred result with 3-D turbulence effects over 2-D. There is no such 2-D turbulence!!! The workbenches include "2_D orifice workbench " and "3_D orifice workbench". In this, simulations are carried using k w turbulence model and compared with experimental results Morrison et al. Research paper is also attached. Simulation parameters: Re=91000,turbulence intensity =0.05%, beta_ratio =0.5, Pipe diameter =50.8. Though the simulations contains the validation with morrison experimental data,main use of this work bench to calibrate the orifice meter using cfd simulation rather then experimentally.

Size: 2.59 MB - Last synced at: over 1 year ago - Pushed at: over 4 years ago - Stars: 1 - Forks: 0

nilot-pal/Blood-flow-into-tumor

Tracking Multiphase blood flow into a tumor

Language: C - Size: 1.04 MB - Last synced at: almost 2 years ago - Pushed at: almost 2 years ago - Stars: 0 - Forks: 0

Aayush-patel-1696/Thermal_design-_semiconductor

This work contains the cooling of semiconductor chip using nano fluids. All details of simulations are in the report files. The google drive link of ansys workbench is also attached

Size: 818 KB - Last synced at: almost 2 years ago - Pushed at: over 4 years ago - Stars: 0 - Forks: 0

Izumiko/udf Fork of QcatQym/udf

Compile & Debug Fluent UDF with CMake

Language: CMake - Size: 6.84 KB - Last synced at: almost 2 years ago - Pushed at: almost 2 years ago - Stars: 0 - Forks: 0

thamilthedal/edge-sizing

Streamlit app for Edge Sizing and small cell Calculation for pipe flow in ANSYS Meshing

Language: Python - Size: 44.9 KB - Last synced at: over 1 year ago - Pushed at: almost 2 years ago - Stars: 1 - Forks: 0

toohidsharifi/200kW-water-cooled-surface-mounted-permanent-magnet-synchronous-motor

Optimal cooling system design and thermal analysis for a totally new electric motor.

Size: 13.6 MB - Last synced at: over 1 year ago - Pushed at: almost 2 years ago - Stars: 2 - Forks: 0

toohidsharifi/3kW-1000-rpm-surface-mounted-permanent-magnet-synchronous-motor

Thermal (heat transfer) analysis

Size: 31.1 MB - Last synced at: almost 2 years ago - Pushed at: almost 2 years ago - Stars: 1 - Forks: 0

pjazdzyk/ansys-fluent-udf

User Defined Functions for Ansys Fluent CFD simulations.

Language: C - Size: 38.1 KB - Last synced at: over 2 years ago - Pushed at: over 2 years ago - Stars: 3 - Forks: 2

wrosendoeng/dissertacao-mestrado-ime-2023

Dissertação de Mestrado

Language: TeX - Size: 27.6 MB - Last synced at: 3 months ago - Pushed at: about 2 years ago - Stars: 0 - Forks: 0

AI-Pranto/SFR-CFD

Thermal hydraulic analysis of SFR fuel assembly

Size: 1.95 KB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

AI-Pranto/TRIGA-CFD-Model

CFD Model of TRIGA Research reactor

Language: C++ - Size: 29.1 MB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

sambhuvaji/ANSYS

Find all the Computational Fluid Dynamics, Finite Element Method, Heat Transfer and Thermal projects performed by me on Ansys Academic 2021 R1, in this repo.

Size: 44.1 MB - Last synced at: over 1 year ago - Pushed at: over 3 years ago - Stars: 5 - Forks: 0

rodolfoplondero/calculo-energia-incidente

Código utilizado para calcular a Energia Incidente utilizando a metodologia da norma ASTM-F1959, através da leitura de arquivos gerados pelo software ANSYS Fluent

Language: Python - Size: 8.61 MB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

rodolfoplondero/mestrado-codes

Códigos utilizados para simulação de arcos elétricos com Ansys Fluent

Language: Jupyter Notebook - Size: 4.12 MB - Last synced at: about 2 years ago - Pushed at: almost 3 years ago - Stars: 0 - Forks: 0

c-schubert/udf-sf-nn-matching

Language: C - Size: 10.7 KB - Last synced at: about 2 years ago - Pushed at: over 5 years ago - Stars: 1 - Forks: 0