dgabbe/degree-days-net

DegreeDays.net screen scraper

Language: Python - Size: 14.6 KB - Last synced at: 1 day ago - Pushed at: 1 day ago - Stars: 1 - Forks: 1

trOw41/CoolCore-CPU

CoolCore-CPU® ist eine spezialisierte Windows-Anwendung, die entwickelt wurde, um die Temperatur und Auslastung Ihrer CPU-Kerne in Echtzeit zu überwachen. Sie bietet detaillierte Einblicke in die Leistungsdaten Ihrer Prozessorkerne und ermöglicht es Ihnen, Temperaturverläufe über die Zeit zu verfolgen.

Language: Visual Basic .NET - Size: 16.2 MB - Last synced at: 1 day ago - Pushed at: 1 day ago - Stars: 1 - Forks: 0

macbre/airrohr-prometheus-exporter

Make prometheus collect temperature, pressure and PM metrics from your airrohr station

Language: Python - Size: 267 KB - Last synced at: 3 days ago - Pushed at: 3 days ago - Stars: 2 - Forks: 1

bartsli/thermoweb2-public

ThermoWEB 2.0 🌡️ - Internet-based temperature monitoring platform where anyone can track measurements from their own stations remotely from anywhere...

Size: 452 KB - Last synced at: 5 days ago - Pushed at: 5 days ago - Stars: 1 - Forks: 0

Gnanu97/ML-Based-temperature-monitoring-system

An IoT-based smart temperature monitoring and control system using ESP32, SX1278 LoRa module, and a neural network hosted on Raspberry Pi. The system uses SX1278 for wireless data transmission between ESP32 nodes and predicts optimal control actions for IR-based devices using real-time sensor data.

Language: C++ - Size: 93.8 KB - Last synced at: 6 days ago - Pushed at: 6 days ago - Stars: 0 - Forks: 0

Kharolski/DistilleryMonitor-Apps

Cross-platform apps for real-time distillery temperature monitoring. .NET MAUI, Blazor & WinUI clients for ESP32 sensor system.

Language: C# - Size: 258 KB - Last synced at: 6 days ago - Pushed at: 6 days ago - Stars: 0 - Forks: 0

milesburton/Arduino-Temperature-Control-Library

🌡️ Arduino library for interfacing with Maxim temperature sensors like DS18B20, DS18S20, and MAX31850. 🔌 Supports multiple sensors, ⚡ asynchronous operation, and 🎯 configurable resolution for precise temperature monitoring.

Language: C++ - Size: 300 KB - Last synced at: 7 days ago - Pushed at: 7 days ago - Stars: 999 - Forks: 490

gemi254/PlantStatus-LilyGO-TTGO-Higrow

A plant monitoring and logging application using LilyGO-TTGO-THigrow device. It provides HomeAssistant integration, live measurements on internal page, configuration portal to setup, record log files, mqtt support for recording measurements.

Language: C++ - Size: 17.1 MB - Last synced at: 7 days ago - Pushed at: 7 days ago - Stars: 17 - Forks: 3

gmastrantoni/thermal_digger

A Python application for analyzing multi-temporal thermal images. This tool allows users to analyze temperature patterns over time in thermal images.

Language: Python - Size: 117 MB - Last synced at: 9 days ago - Pushed at: 9 days ago - Stars: 1 - Forks: 1

Shristirajpoot/thermotrack

A smart system to track, log, and alert temperature/humidity data using ESP32, ThingSpeak & Telegram Bot.

Language: C++ - Size: 36.1 KB - Last synced at: 10 days ago - Pushed at: 10 days ago - Stars: 1 - Forks: 0

lutfiozark/sicaklik-olcme

Sıcaklık izleme ve alarm sistemi

Language: Python - Size: 1.01 MB - Last synced at: 12 days ago - Pushed at: 12 days ago - Stars: 1 - Forks: 0

KopyTKG/tempViewer

Linux CLI utility for monitoring temperatures of components in PC

Language: Go - Size: 323 KB - Last synced at: 2 days ago - Pushed at: 12 days ago - Stars: 0 - Forks: 0

rjl77/pond-monitoring

Pond monitoring scripts

Language: Python - Size: 28.7 MB - Last synced at: 12 days ago - Pushed at: 12 days ago - Stars: 0 - Forks: 0

vmatare/thinkfan

The minimalist fan control program

Language: C - Size: 752 KB - Last synced at: 12 days ago - Pushed at: 20 days ago - Stars: 609 - Forks: 63

NewOpenHardwareMonitor/OpenHardwareMonitor Fork of openhardwaremonitor/openhardwaremonitor

Open hardware monitor - system sensors monitoring application for Windows

Language: C# - Size: 5.83 MB - Last synced at: 14 days ago - Pushed at: 14 days ago - Stars: 6 - Forks: 0

ManiAm/raspi-enviro-watch

A lightweight system for collecting temperature, humidity, and battery data from multiple BLE environmental sensors (LYWSD03MMC) using a Raspberry Pi. It decodes advertisements, enriches sensor metadata, and forwards the data to a remote InfluxDB database for storage, visualization, and analysis.

Language: Python - Size: 1.17 MB - Last synced at: 17 days ago - Pushed at: 18 days ago - Stars: 0 - Forks: 0

flurry101/remote-air-quality-monitoring-system

a remote air quality monitoring system using esp32 microcontroller that sends real-time data to a blynk dashboard, with alerts for unsafe air, temperature, or humidity levels 📊💨

Language: C++ - Size: 59.6 KB - Last synced at: 18 days ago - Pushed at: 18 days ago - Stars: 0 - Forks: 0

doerfli/shelly-temp

Webapplication to receive temperature and humidity readings from shelly and show on webpage

Language: Ruby - Size: 1.28 MB - Last synced at: about 20 hours ago - Pushed at: 9 days ago - Stars: 0 - Forks: 0

Mausy5043/kimnaty

Monitoring LYWSD03MMC devices in various rooms in my house

Language: Python - Size: 791 KB - Last synced at: 11 days ago - Pushed at: 11 days ago - Stars: 1 - Forks: 0

richbl/go-raspi-temp-monitor

Go-Raspi-Temp-Monitor is a temperature monitoring application designed for Raspberry PI devices. It will read the CPU temperature at regular intervals and send alerts via email when the temperature exceeds a specified threshold.

Language: Go - Size: 48.8 KB - Last synced at: 3 days ago - Pushed at: about 1 month ago - Stars: 1 - Forks: 0

alexgeraldo/ilo-fan-control

Web dashboard to control and monitor HP Gen8 server fans via unlocked iLO 4 firmware

Language: Python - Size: 354 KB - Last synced at: 22 days ago - Pushed at: 22 days ago - Stars: 0 - Forks: 0

RajeevKPurdue/Cisco_IN_inlandLakes

Spatiotemporal analyses of Dissolved Oxygen & Temperature from monitoring rear-edge, protected species in Indiana lakes with INDNR. Habitat Modeling & Temporal Scale Comparisons

Language: Python - Size: 123 KB - Last synced at: 22 days ago - Pushed at: 22 days ago - Stars: 0 - Forks: 0

JoerdonFryeman/Clock

A simple console retro clock with system information.

Language: Python - Size: 18.2 MB - Last synced at: 24 days ago - Pushed at: 24 days ago - Stars: 0 - Forks: 0

mt-inside/go-lmsensors

Linux hardware sensor monitoring in Go

Language: Go - Size: 49.8 KB - Last synced at: 6 days ago - Pushed at: over 1 year ago - Stars: 5 - Forks: 1

btframework/TempSensor

Temperature and Humidity Sensor for Apple HomeKit

Language: C - Size: 1.74 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

th3-riddler/System-Temperature-Checker

A pretty straightforward implementation of a Rust temperature checker

Language: Rust - Size: 9.77 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 2 - Forks: 0

kibetbrian74/real-time-temperature-monitoring-simple-system

A simple system that gives updates on simulated temperature every second ✌

Language: TypeScript - Size: 38.1 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 1 - Forks: 0

alsuren/mijia-homie

A Homie MQTT bridge for the Xiaomi Mijia 2 hygrometer-thermometer. This repo also serves as the monorepo for a handful of helper crates related to Homie and Bluetooth.

Language: Rust - Size: 5.49 MB - Last synced at: 28 days ago - Pushed at: about 1 month ago - Stars: 68 - Forks: 14

timothysteffes/SHTC3-Code-Example

Setup and use the SHTC3 Digital Temperature Sensor on a Rasbperry Pi with Flask REST API

Language: Python - Size: 8.79 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

narugit/smctemp

CLI tool to print CPU and GPU temperature of macOS

Language: C++ - Size: 87.9 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 65 - Forks: 10

UshakovVasilii/gnome-shell-extension-freon Fork of isDipesh/gnome-shell-extension-sensors

Shows CPU temperature, disk temperature, video card temperature (NVIDIA/Catalyst/Bumblebee&NVIDIA), voltage and fan RPM

Language: JavaScript - Size: 961 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 444 - Forks: 79

HJvA/fshome

homekit enabled logger of measured quantities, stored in a sqlite database, and graphically displayed in a browser

Language: Python - Size: 4.8 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 1 - Forks: 0

tbhvishal/Python-Weather-Info-App

A simple and customizable weather application built with Python, utilizing Tkinter for the GUI and the OpenWeatherMap API to fetch real-time weather data. This app provides accurate and up-to-date weather information for any city you choose, with a sleek, user-friendly interface.

Language: Python - Size: 1.1 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 3 - Forks: 1

araujofrancisco/Live_Temp

Plot live temperature

Language: Python - Size: 18.6 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

Tominick/pi-temperature-monitor

Raspberry Pi-based temperature monitor

Language: C# - Size: 228 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 2 - Forks: 0

L-A-N-E/Coastal-Underwater-Temperature-Analysis

Explores underwater temperature variations in Santa Catarina's coastal islands using Python. Analyzes data from Kaggle/SEANOE to identify location, depth, and seasonal patterns, addressing global warming's impact on marine ecosystems.

Language: Jupyter Notebook - Size: 0 Bytes - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

vega11325/temperature-sonification

Experimental sonification of temperature sensor data revealing structured, speech-like patterns coinciding with geomagnetic disturbances. Includes original dataset processing, synthetic signal attempts, and full write-up.

Language: PHP - Size: 17.4 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

nitrocosmstudios/temperature-sonification

Experimental sonification of temperature sensor data revealing structured, speech-like patterns coinciding with geomagnetic disturbances. Includes original dataset processing, synthetic signal attempts, and full write-up.

Language: PHP - Size: 20.9 MB - Last synced at: about 1 month ago - Pushed at: about 2 months ago - Stars: 0 - Forks: 0

MindFlavor/prometheus_smartctl_temperature_exporter

An exporter for the disk temperature reported by smartctl, written in Rust

Language: Rust - Size: 137 KB - Last synced at: 5 days ago - Pushed at: 8 months ago - Stars: 6 - Forks: 0

ajeyverma/smartcontroller

An IoT-based Smart System using Arduino, Sensors and MIT App Inventor.

Language: C++ - Size: 10.2 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 0 - Forks: 0

DrA1ex/co2-temp-monitor

CO2/Temperature (or any other sensor) monitor with Web UI and Telegram Bot (alerting, status, chart etc)

Language: JavaScript - Size: 222 KB - Last synced at: 3 days ago - Pushed at: about 2 months ago - Stars: 1 - Forks: 1

Jaroslav-Dvorak/PicoInk

Battery powered e-ink wireless sensor with display

Language: Python - Size: 212 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 35 - Forks: 2

JustASquirrelinAround/pifandashboard

A complete solution for Raspberry Pi PWM fan control, featuring a web-based dashboard to monitor CPU temperature, fan speed, and system performance — with support for monitoring multiple Raspberry Pis in real time.

Language: Shell - Size: 689 KB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 15 - Forks: 2

mightykatun/netdata-collectors

Collectors for netdata agent

Language: Shell - Size: 139 KB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 2 - Forks: 0

QingTian1927/ArduClimate

An Arduino-controlled temperature and humidity regulator connected to a website interface via WiFi. For my IoT class.

Language: HTML - Size: 1010 KB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 0 - Forks: 1

blackpearl-git/ha-fireboard

Home Assistant integration for FireBoard Thermometers

Language: Python - Size: 6.84 KB - Last synced at: about 2 months ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

RobThree/TemperatureDisplay

Measures temperature and humidity using a GXHT30 and displays this information on an SSD1306 OLED display. Offers a HTTP endpoint to read values as JSON, also outputs values on serial.

Language: C++ - Size: 7.61 MB - Last synced at: 7 days ago - Pushed at: 2 months ago - Stars: 2 - Forks: 0

cyberkutti-iedc/Chick-Click

ChickClick 🐥 is a fun and educational battery health monitoring app that simulates egg incubation based on your device's temperature. Hatch a chicken 🐔 with normal usage, or overheat your phone and end up with an omelet 🍳! Built with React Native Expo and TypeScript, currently available for Android.

Language: TypeScript - Size: 3.49 MB - Last synced at: 23 days ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0

martinius96/WiFi-termostat

WiFi termostat postavený na platforme Espressif - ESP8266 / ESP32 s využitím teplotného senzora Dallas DS18B20 na OneWire zbernici. Umožuje riadiť kotol signálovým relé ovládaným cez GPIO invertovanou logikou. Výstup je možné na základe firmvéru riadiť v automatickom režime s nastavenou cieľovou teplotou a hysterézou, alebo manuálne softvérovým tlačidlom. WiFi thermostat built on the Espressif platform - ESP8266 / ESP32 using the Dallas DS18B20 temperature sensor on the OneWire bus. It allows to control the boiler by a signal relay controlled via GPIO inverted logic. The output can be controlled on the basis of the firmware in automatic mode with the set target temperature and hysteresis, or manually with a softkey.

Language: C++ - Size: 7.71 MB - Last synced at: about 2 months ago - Pushed at: 2 months ago - Stars: 5 - Forks: 3

PKHarsimran/esp8266-temp-humidity-monitor

ESP8266-based IoT project for tracking temperature and humidity using ESPHome, MQTT, Telegraf, InfluxDB, and Grafana.

Language: Shell - Size: 37.1 KB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

wkirgsn/deep-pmsm

Estimate intrinsic Permanent Magnet Synchronous Motor temperatures with deep recurrent and convolutional neural networks.

Language: Python - Size: 603 KB - Last synced at: 2 months ago - Pushed at: over 5 years ago - Stars: 16 - Forks: 17

darton/RPiMS

Raspberry Pi monitoring system offering: live video transmission recording the stream using UV4L, reading door, window, motion, temperature, humidity, pressure sensors, presentation of their values and sending their states to the Zabbix server. It also offers a weather station: wind speed and direction meter, rainfall meter

Language: Python - Size: 3.46 MB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 11 - Forks: 5

Koon-Kiat/Care-Link

The Care Link Project aims to create a portable, wearable device designed to assist individuals with cognitive disabilities, including those with mental disabilities and dementia.

Language: C++ - Size: 15.2 MB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 5 - Forks: 0

xanthium-enterprises/DIY-4-Channel-Arduino-Temperature-Data-acquisition-System

A cheap low cost diy data acquisition based on Arduino UNO which can monitor tempearture data from 4 independent analog temperature sensors and display it on a PC/Laptop/Mac

Language: C++ - Size: 183 KB - Last synced at: 24 days ago - Pushed at: over 1 year ago - Stars: 3 - Forks: 2

josgard94/arduino-bluetooth-sensor-app

This project is a React Native application that connects to an Arduino microcontroller via Bluetooth to receive real-time temperature and humidity data from a DHT11/DHT22 sensor. The app displays the collected data.

Language: C++ - Size: 9.77 KB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 1 - Forks: 0

shibatch/cputemp

Daemon for controlling clock frequency to keep CPU below specified temperature

Language: C++ - Size: 40 KB - Last synced at: 3 months ago - Pushed at: 7 months ago - Stars: 3 - Forks: 0

hyper-prog/glowdash

Smart Home Web Dashboard

Language: Go - Size: 3.78 MB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 1 - Forks: 0

gavinlyonsrepo/raspberrypi_tempmon

System monitoring program for Raspberry pi single board computers written in Python 3.

Language: Python - Size: 1.87 MB - Last synced at: 2 months ago - Pushed at: 9 months ago - Stars: 81 - Forks: 15

Lifailon/PowerShell.HardwareMonitor

Module for local and remote data acquisition temperature, load and other sensors system, for implement monitoring via InfluxDB and Grafana

Language: PowerShell - Size: 6.94 MB - Last synced at: 8 days ago - Pushed at: over 1 year ago - Stars: 7 - Forks: 2

mcer12/Temper-ESP8266

Temper is a compact temperature sensor based on ESP8266 and SHT30 with large 13x7 pixel led display.

Language: C++ - Size: 1.94 MB - Last synced at: 2 months ago - Pushed at: over 4 years ago - Stars: 173 - Forks: 17

YNodd/simple-terminal-based-airing-app

App that compares inside and outside values and shows whether airing is needed, based on humidity and temperature

Language: Python - Size: 96.7 KB - Last synced at: 3 months ago - Pushed at: 4 months ago - Stars: 0 - Forks: 0

zZLucho988/AIDA64-System-Information-Software

AIDA64 provides in-depth analysis of your computer’s hardware, software, and sensors, ensuring you have detailed system information and diagnostics. 🖥️⚙️

Size: 1.95 KB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 0 - Forks: 0

hail28palladium/AIDA64-System-Information-Software

AIDA64 provides in-depth analysis of your computer’s hardware, software, and sensors, ensuring you have detailed system information and diagnostics. 🖥️⚙️

Size: 7.81 KB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 0 - Forks: 0

Jana-Marie/temperature-logger

Anotter USB temperature logger that can record up to four channels with thermocouple or NTCs connected via CDC directly or SCPI to USB.

Language: C - Size: 10.1 MB - Last synced at: 11 days ago - Pushed at: about 2 years ago - Stars: 61 - Forks: 7

grodansparadis/can4vscp_kelvin_ntc10k

CAN4VSCP Kelvin NTC temperature measurement module

Language: PHP - Size: 256 MB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 1 - Forks: 0

Udeste/Thermo-hygro-sensor

An tiny ultra low power thermo-hygro sensor made with a DHT22 sensor and ESP8266 micro-controller. It collects data for temperature and humidity. Extremely optimized for running on a 18650 Li-ion battery for more than 5 months without recharge.

Language: C++ - Size: 698 KB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 1 - Forks: 0

hdtodd/DNT

Display neighborhood thermometer readings

Language: Python - Size: 271 KB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 4 - Forks: 1

wurstbroteater/HomeTemp

Measure temperature and humdity of a room, retrieve online weather data, visualize it, analyse it and send it via email.

Language: Python - Size: 10.4 MB - Last synced at: 4 days ago - Pushed at: 23 days ago - Stars: 0 - Forks: 0

sexyrisknicklost4/AIDA64-System-Information-Software

AIDA64 provides in-depth analysis of your computer’s hardware, software, and sensors, ensuring you have detailed system information and diagnostics. 🖥️⚙️

Size: 7.81 KB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 0 - Forks: 0

tibbotech/CA-Test-Tibbit-62

Test Application for the 1-Wire/Single-Wire Tibbit (#62) with In-System Updates Sample

Size: 647 KB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 0 - Forks: 0

mr-mohan-v/Temperature-Controlled-DC-Fan

Temperature controlled DC fan using LM35 and Relay in LPC2148 microcontroller

Language: HTML - Size: 3.03 MB - Last synced at: 4 months ago - Pushed at: almost 2 years ago - Stars: 3 - Forks: 0

ingramm1698/AIDA64-System-Information-Software

AIDA64 provides in-depth analysis of your computer’s hardware, software, and sensors, ensuring you have detailed system information and diagnostics. 🖥️⚙️

Size: 0 Bytes - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

ripred/CPUTemp

Arduino Library to calculate the processors internal temperature using nothing more than the ATmega processor itself! Absolutely no additional components or connections are needed!

Language: C++ - Size: 26.4 KB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 6 - Forks: 1

SergiuMaier/SARS-Cov-2-virus-infection-assessment-system

🌡😷 SARS-Cov-2 virus infection assessment system using the body temperature

Language: C++ - Size: 17.6 KB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

PraweenSoni/Temperature-esp8266

Temperature monitoring

Language: C++ - Size: 2.93 KB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

gammy/ecfantemp

An ectool wrapper to simplify fan / temperature reading and configuration

Language: Shell - Size: 10.7 KB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

bytecrusher/MaritimeDataServer

MDS (Maritime Data Server) is the central data server for the Maritime Data.

Language: PHP - Size: 3.05 MB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 5 - Forks: 2

lkiesow/shelly-ht-exporter

Shelly H&T Prometheus Exporter

Language: Go - Size: 18.6 KB - Last synced at: 3 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

f213/adb-prometheus-exporter

Language: Python - Size: 30.3 KB - Last synced at: 5 days ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

CelliesProjects/FFatSensor

ESP32 Arduino IDE library for managing Dallas DS18B20 sensors.

Language: C++ - Size: 52.7 KB - Last synced at: 19 days ago - Pushed at: over 5 years ago - Stars: 2 - Forks: 0

freedomtan/sensors_cmdline

Read thermal/temperature sensors, voltage meters, and current meters on M1 and iPhone

Language: Objective-C - Size: 13.7 KB - Last synced at: 6 months ago - Pushed at: 6 months ago - Stars: 36 - Forks: 11

dennedom/climaviewer

Linux tool to visualize and export temperature and humidity data from the DNT Raumklimastation RoomLogg PRO

Language: Shell - Size: 225 KB - Last synced at: 2 months ago - Pushed at: 6 months ago - Stars: 0 - Forks: 0

julianebueno/ATP_IoT

Microprocessador ESP32 - Registro de temperatura e envio de dados para internet

Language: Python - Size: 3.91 KB - Last synced at: 3 months ago - Pushed at: over 1 year ago - Stars: 1 - Forks: 0

araeubig/Raspberry-Pi-Dashboard

A configurable LCD dashboard with touch functionality for headless Raspberry Pi servers. (Optional without touch)

Language: Python - Size: 3.82 MB - Last synced at: 3 months ago - Pushed at: 6 months ago - Stars: 0 - Forks: 0

GnomGad/arduino-weather-monitor

simple methiostation with lcd monitor and sensor

Language: C++ - Size: 115 KB - Last synced at: 3 months ago - Pushed at: 11 months ago - Stars: 0 - Forks: 0

QuantumWizard888/helios-temp-sensor-monitor

Helios is a simple hardware temperature sensor monitor for your GPU and CPU written in Python and TKinter

Language: Python - Size: 453 KB - Last synced at: 3 months ago - Pushed at: 6 months ago - Stars: 0 - Forks: 0

cj667113/LoPRTS

Low Power Remote Temperature Sensor

Language: Python - Size: 25.1 MB - Last synced at: 3 months ago - Pushed at: over 5 years ago - Stars: 16 - Forks: 1

BinaryLeo/raspberry_pico_monitor

Output data from raspberry pico temperature sensor on powershell

Language: Python - Size: 16 MB - Last synced at: 2 months ago - Pushed at: almost 3 years ago - Stars: 7 - Forks: 2

pageauc/pifan

Control Raspberry Pi case fan on/off using CPU temperature

Language: Python - Size: 25.4 KB - Last synced at: 2 months ago - Pushed at: over 1 year ago - Stars: 8 - Forks: 0

rafaelchasles/samet

Baixa dados SAMeT (South American Mapping of Temperature) do INPE CPTEC a cada hora e calcula estatísticas zonais para um grid espacial definido.

Language: Python - Size: 9.77 KB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 0 - Forks: 0

karami-mehdi/iot-temperature-monitoring

This project simulates a temperature monitoring system using the DHT22 sensor and ESP8266 Wi-Fi module in the Wokwi simulator. The system reads temperature data from the DHT22 sensor and sends it to a mock server for monitoring.

Language: C++ - Size: 630 KB - Last synced at: 4 months ago - Pushed at: 7 months ago - Stars: 1 - Forks: 0

TiVoHomeUser/DigiTempESP

Monitor several ESP8266 + DHT22 Temperature / Humidity sensors from a single HTML page.

Language: C - Size: 1.02 MB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 2 - Forks: 2

Numax-cz/NapicuRPITempSensor

Školní projekt pro Raspberry Pi, který snímá teplotu okolí a vykresluje jej do grafu ve webovém rozhraní

Language: TypeScript - Size: 455 KB - Last synced at: 2 months ago - Pushed at: 7 months ago - Stars: 0 - Forks: 0

fendi-art/weather

This app will help you check the weather + AI recommendation.

Size: 4.88 KB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 1 - Forks: 0

inpacta/Senlogy

Senlogy: Sistema de aquisição de temperatura, humidade e luminosidade com ESP8266 🚀

Language: C++ - Size: 6.84 KB - Last synced at: 1 day ago - Pushed at: 7 months ago - Stars: 0 - Forks: 0

kianush00/Web-scraper-Grafana

Automatic extraction of web information from Grafana using Python and Selenium, used to monitor real-time temperature values and notify through the Telegram API.

Language: Python - Size: 182 KB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 0 - Forks: 0

lime-labs/HDC2080-Arduino Fork of tinkeringtech/HDC2080_breakout

This is the Arduino library for the Texas Instruments HDC2080 temperature & humidity sensor

Language: C++ - Size: 1.03 MB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 6 - Forks: 5

ANSHVIVEKMALHOTRA/Miniproject-HEATWATCH

HEATWATCH(Temperature monitoring system)-[Digital and System Designs]

Language: Verilog - Size: 39.1 MB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 2 - Forks: 2

matzeema/GehaPoolControl

Temperature control system for a swimming pool using arduinos and flutter-web.

Language: Dart - Size: 1.12 MB - Last synced at: 3 months ago - Pushed at: 8 months ago - Stars: 1 - Forks: 0

ajyounguk/bme280-temperature-logger

a nodejs app designed to run on Raspberry Pi's that will make periodic temperature, barometric pressure and humidity readings from a BME280 sensor, and store the data into MongoDB and/or a MQTT topic

Language: JavaScript - Size: 375 KB - Last synced at: 3 months ago - Pushed at: 8 months ago - Stars: 0 - Forks: 0