GitHub topics: humidity-sensor
FarhanKhosravi/Dynamic_Window_Filter
Dynamic Window Filter (DWFilter) is an Ultra-Lightweight library for filtering and smoothing Slow-Rate data (from slow sensors, etc) without time lag and delay.
Language: C++ - Size: 61.5 KB - Last synced at: 1 day ago - Pushed at: 2 days ago - Stars: 1 - Forks: 0
Franciserah/dht11UART
Projet utilisant la programmation registres, pour interfacer un capteur de température et d'humidité DHT11 avec un ATmega2560, implémentant le protocole 1-wire pour la transmission des données via UART.
Language: C - Size: 18.6 KB - Last synced at: 3 days ago - Pushed at: 3 days ago - Stars: 0 - Forks: 0
MOONSHOP03/GXHTC3
GXHTC3 is a straightforward library for reading temperature and humidity data from the GXHTC3 sensor using I2C. Explore the examples to see how easily you can integrate this sensor into your Arduino projects! 🛠️🌡️
Language: C++ - Size: 8.79 KB - Last synced at: 3 days ago - Pushed at: 3 days ago - Stars: 0 - Forks: 0
irq777/SHT4xGadgetScan
An Arduino Uno Wifi based Bluetooth scanner for Sensirion SHT4x Smart Gadgets measuring temperature and humidity
Language: C++ - Size: 5.86 KB - Last synced at: 7 days ago - Pushed at: 7 days ago - Stars: 1 - Forks: 0
eode/pcsensor
TEMPer Temperature and Humidity Sensors for HomeAssistant
Language: Python - Size: 202 KB - Last synced at: 9 days ago - Pushed at: 9 days ago - Stars: 0 - Forks: 0
Fyzel/weather-data-sensor
Weather data sensor collection code.
Language: Python - Size: 28.2 MB - Last synced at: 14 days ago - Pushed at: 14 days ago - Stars: 5 - Forks: 1
UncleRus/esp-idf-lib
Component library for ESP32-xx and ESP8266
Language: C - Size: 4.73 MB - Last synced at: 7 days ago - Pushed at: 3 months ago - Stars: 1,529 - Forks: 467
eduautomatiza/GXHTC3
GXHTC3 is an Arduino-compatible library for interfacing with the GXHTC3 temperature and humidity sensor via I2C. It provides an easy-to-use interface for sensor communication, data reading, and power management.
Language: C++ - Size: 4.88 KB - Last synced at: 19 days ago - Pushed at: 19 days ago - Stars: 0 - Forks: 0
devbis/z03mmc
Xiaomi LYWSD03MMC Zigbee Firmware
Language: C - Size: 1.02 MB - Last synced at: 16 days ago - Pushed at: 8 months ago - Stars: 1,132 - Forks: 60
irq777/CLIMAX2001
An Arduino UNO based room-climate SD card logger with display measuring C02, laser dust detection, temperature, humidity, pressure...
Language: C++ - Size: 602 KB - Last synced at: 29 days ago - Pushed at: 29 days ago - Stars: 0 - Forks: 0
hannseman/homebridge-mi-hygrothermograph
Homebridge plugin for the Xiaomi Mi Bluetooth Temperature and Humidity Sensor
Language: JavaScript - Size: 1.29 MB - Last synced at: 17 days ago - Pushed at: 5 months ago - Stars: 274 - Forks: 52
narahma2/i2c-sensors
Python/LabJack implementation of I2C temperature/humidity sensor communication
Language: Python - Size: 1000 Bytes - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0
DarekKrawczyk/BMP280
BMP280 module library dedicated to Raspberry Pi Pico (RP2040) written in C++.
Language: C++ - Size: 10.7 KB - Last synced at: 8 days ago - Pushed at: about 2 years ago - Stars: 2 - Forks: 1
utkumaden/esp-idf-bmx280
BMP280 and BME280 I2C driver for ESP32 boards using the IDF toolchain.
Language: C - Size: 33.2 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 39 - Forks: 15
christianTsounguiObama/dht11UART
Ce projet implémente, en langage C bare-metal, une interface directe entre un microcontrôleur ATmega2560 (Arduino Mega) et un capteur de température et d’humidité DHT11, sans utiliser de bibliothèques externes. Les données mesurées sont ensuite transmises via le protocole UART à un terminal série ou un autre périphérique.
Language: C - Size: 68.4 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0
christianTsounguiObama/dht11_hd44780
Ce projet met ensemble le capteur DHT11, le microcontrôleur ATmega2560 (Arduino Mega) et un écran LCD HD44780 1602 en mode 4 bits pour la lecture et l'affichage des donnees de temperature et d'humidite. L'interface est codée en C bas-niveau, en manipulant directement les registres d'entrée/sortie (PORTx, DDRx) pour contrôler les broches de données
Language: C - Size: 62.5 KB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0
sparkfun/SparkFun_BME280_Arduino_Library
An Arduino library to control the BME280 humidity and pressure sensor.
Language: C++ - Size: 124 KB - Last synced at: 20 days ago - Pushed at: over 1 year ago - Stars: 123 - Forks: 113
pskowronek/home-air-quality-and-assistant
Home Air Quality monitor and Voice Assistant running on Raspberry Pi zero
Language: Shell - Size: 4 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 4 - Forks: 1
openenergymonitor/emonth2
emonTH V2 wireless temperature & humidity sensor with SI7021 sensor
Language: C++ - Size: 7.9 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 26 - Forks: 28
mousa-alagha/ESP32_IoT_Project
An IoT project that collects temperature, humidity, and vibration data using ESP32, sending it to the Blynk app and MQTT broker. Includes remote LED control.
Language: C++ - Size: 3.91 KB - Last synced at: 13 days ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0
Boardoza/Boardoza_TH09C_Temperature_Humidity_Sensor_Breakout_Board
TH09C Digital Temperature and Humidity Sensor Breakout Board for Accurate Environmental Monitoring via I2C Interface.
Language: C++ - Size: 1.79 MB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0
gabrieldim/HumiditySensor
Embedded systems using STM32 boards.
Language: C - Size: 1.58 MB - Last synced at: 2 months ago - Pushed at: over 4 years ago - Stars: 112 - Forks: 3
IndoorCorgi/cgsensor
Raspberry Pi拡張基板に搭載されているセンサーを一括して制御できるPythonパッケージとコマンドラインツールです。Python package and command line tool to control sensors on Raspberry Pi
Language: Python - Size: 39.1 KB - Last synced at: 4 days ago - Pushed at: 2 months ago - Stars: 4 - Forks: 4
yasir-shahzad/SHT30
SHT30 Humidity and Temperature Sensor
Language: C++ - Size: 14.6 KB - Last synced at: about 2 months ago - Pushed at: over 2 years ago - Stars: 25 - Forks: 2
MichaelNeys/BME280-python
Bosch BME280 sensor
Language: Python - Size: 275 KB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0
aexel90/shelly_exporter
Shelly humidity sensor exporter for prometheus
Language: Go - Size: 1.09 MB - Last synced at: 2 months ago - Pushed at: 3 months ago - Stars: 9 - Forks: 0
Duglof/WifiThermostat
WifiThermostat for ESP8266 or ESP32
Language: HTML - Size: 5.11 MB - Last synced at: 2 months ago - Pushed at: 3 months ago - Stars: 1 - Forks: 0
jwillikers/humidity-sensor-circuitpython
A portable humidity sensor using an RP2040 Feather and eInk display
Language: Python - Size: 91.7 MB - Last synced at: 7 days ago - Pushed at: 3 months ago - Stars: 3 - Forks: 1
HaroldPetersInskipp/IndoorAutoGarden
An ecosystem monitoring setup, ideal for growing plants indoors without user intervention.
Language: Python - Size: 1.27 MB - Last synced at: about 2 months ago - Pushed at: almost 3 years ago - Stars: 17 - Forks: 0
prdktntwcklr/python-sht31
Python library for the SHT31 temperature and humidity sensor.
Language: Python - Size: 754 KB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0
dawinaj/BME280
BME280 driver for ESP32
Language: C - Size: 94.7 KB - Last synced at: 2 months ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0
sciosense/ens21x-arduino
Arduino library for the ENS21x temperature & humidity sensor family
Language: C - Size: 162 KB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 2 - Forks: 1
enjoyneering/AHTxx
This is an Arduino library for Aosong ASAIR AHT1x, AHT2x Digital Humidity & Temperature Sensor
Language: C++ - Size: 97.7 KB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 105 - Forks: 26
Djuke-DIYAudio/indoor-sensor
Affordable indoor sensor for measuring CO2, temperature, humidity and pressure
Size: 2.93 MB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0
MikeWoodward/UT330B
Operating system independent controller and data visualizer for the Uni-Trend UT330B temperature and humidity logger. Full documentation provided. Uses Python, Pandas, and Bokeh.
Language: Python - Size: 7.2 MB - Last synced at: 3 months ago - Pushed at: over 2 years ago - Stars: 14 - Forks: 6
Cronware/ESP32-thermostat-temperature-prediciton
An IoT-based thermostat using ESP32, WebSockets, and MQTT for real-time control and monitoring.
Language: C++ - Size: 11.7 KB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 0 - Forks: 0
iobroker-community-adapters/ioBroker.cleveron 📦
ioBroker Adapter für die Cleveron-API
Language: JavaScript - Size: 1.07 MB - Last synced at: about 1 month ago - Pushed at: 4 months ago - Stars: 1 - Forks: 1
ThunderFly-aerospace/TFHT01
Airborne Humidity and Temperature sensor for UAVs.
Language: C - Size: 18.8 MB - Last synced at: 18 days ago - Pushed at: 4 months ago - Stars: 8 - Forks: 2
kshetline/rpi-acu-rite-temperature
Library for reading Acu-Rite temperature/humidity sensor with Raspberry Pi via 433Mhz receiver
Language: C++ - Size: 82 KB - Last synced at: 18 days ago - Pushed at: 4 months ago - Stars: 7 - Forks: 0
gavinlyonsrepo/DHT11_PICO
Raspberry pi Pico SDk C++ library for the DHT11 Temperature & Humidity Sensor.
Language: C++ - Size: 120 KB - Last synced at: 2 months ago - Pushed at: 4 months ago - Stars: 0 - Forks: 0
wilsnico240/Arduino
Arduino UNO projects scripts .
Language: C - Size: 270 KB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 1 - Forks: 0
ConnerWill/esp32-plant
ESP32 Plant Monitor with API and OLED
Language: C++ - Size: 12.1 MB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 1 - Forks: 0
hantdev/smart-garden 📦
Smart Plant Watering and Lighting System to Enhance Plant Growth Using Internet of Things. Making a smart garden system that has sensor data on light, temperature, humidity and soil moisture to determine the health status of a plant which will be displayed on a website or mobile app.
Language: Dart - Size: 11.2 MB - Last synced at: 3 months ago - Pushed at: 4 months ago - Stars: 0 - Forks: 3
adrianlois/RaspberryPi-Projects
Misc projects for RaspberryPi
Language: Python - Size: 755 KB - Last synced at: 3 months ago - Pushed at: 5 months ago - Stars: 2 - Forks: 0
sanjidaaaziz/Temperature-controlled-DC-fan
Temperature controlled DC fan is the simulation of the fan speed control system using a room temperature sensor, DC motor and Arduino Uno.
Language: C++ - Size: 18.8 MB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 3 - Forks: 0
nurazur/TiNo2
TiNo2 ("Tiny Node 2nd generation") is a small, battery operated wireless sensor working in the sub-GHz ISM Band.
Language: C++ - Size: 522 KB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 1
SeppPenner/SensorsPayloadDecoder
SensorsPayloadDecoder is a library to read the payload information from the Bosch parking sensor and the Elsys ERS sensor binary data.
Language: C# - Size: 6.11 MB - Last synced at: 3 months ago - Pushed at: 5 months ago - Stars: 2 - Forks: 0
Seeed-Studio/Seeed_Python_DHT
The python3 code is to read the humidity and temperature from the sensor.
Language: Python - Size: 12.7 KB - Last synced at: 19 days ago - Pushed at: 5 months ago - Stars: 10 - Forks: 3
PsyChonek/ClimateTracker
Humidity and Temperature tracker for ESP
Language: JavaScript - Size: 14.2 MB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 1 - Forks: 0
jposada202020/MicroPython_HTU31D 📦
⛔️ DEPRECATED MicroPython library for TE HTU31D temperature and humidity sensors
Language: Python - Size: 40 KB - Last synced at: 5 days ago - Pushed at: 6 months ago - Stars: 1 - Forks: 0
Erbsensuppee/esp32-i2c-new-driver-bme280
An ESP32 environmental monitoring system using the new I2C driver (driver/i2c_master.h) and the updated BME280 library (2020). Fully configurable with ESP-IDF and FreeRTOS.
Language: C - Size: 20.5 KB - Last synced at: 2 months ago - Pushed at: 6 months ago - Stars: 0 - Forks: 0
ScienceDiscoverer/RWS
Room Weather Station
Language: C++ - Size: 135 KB - Last synced at: 6 months ago - Pushed at: over 3 years ago - Stars: 2 - Forks: 0
DarekKrawczyk/Si7021
Si7021 module library for Raspberry Pi Pico (RP2040 microcontroller) written in C++
Language: C++ - Size: 13.7 KB - Last synced at: 8 days ago - Pushed at: about 2 years ago - Stars: 2 - Forks: 0
myles-parfeniuk/wsen_hids_breakout
Breakout board for Würth Elektronik 2525020210002 humidty w/ integrated temperature sensor IC.
Size: 12.9 MB - Last synced at: 9 days ago - Pushed at: 6 months ago - Stars: 0 - Forks: 0
cjee21/RPi-DHT20
Raspberry Pi Python library for DHT20 Temperature and Humidity Sensor with CRC verification.
Language: Python - Size: 16.6 KB - Last synced at: about 2 months ago - Pushed at: 7 months ago - Stars: 7 - Forks: 0
dehre/sht21
ESP32 Library for the SHT21 Temperature and Humidity Sensor
Language: C - Size: 456 KB - Last synced at: 4 days ago - Pushed at: about 3 years ago - Stars: 0 - Forks: 2
boneskull/shtshow 📦
Temperature & humidity sensor Thing using ESP8266 + MQTT + SHT30. Built with PlatformIO and Homie
Language: C++ - Size: 25.4 KB - Last synced at: 2 months ago - Pushed at: almost 6 years ago - Stars: 6 - Forks: 1
asukiaaa/AM2320_asukiaaa
Language: C++ - Size: 13.7 KB - Last synced at: 3 days ago - Pushed at: almost 6 years ago - Stars: 4 - Forks: 0
ptr33/temp_humidity_sensor
Temperature and Humidity Sensor with a DHT22 and Raspberry Pi Zero W and publish to MQTT
Language: Shell - Size: 2.39 MB - Last synced at: 3 months ago - Pushed at: 7 months ago - Stars: 0 - Forks: 0
Sensirion/arduino-sht Fork of winkj/arduino-sht
Repository for Sensirion humidity and temperature sensor support on Arduino
Language: C++ - Size: 54.7 KB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 68 - Forks: 44
thegroundhogwhisperer/Ay-yahs-Greenhouse
Raspberry Pi Greenhouse Automation Project :cherry_blossom:
Language: Python - Size: 142 MB - Last synced at: 2 months ago - Pushed at: almost 6 years ago - Stars: 15 - Forks: 8
SarthakSKumar/BYOB-Bring-Your-Own-Board Fork of Sohoxic/BYOB
Event under Maaya '22, PES University
Language: C++ - Size: 11.7 MB - Last synced at: 7 days ago - Pushed at: over 2 years ago - Stars: 3 - Forks: 0
codebydant/sht1x_esp32_idf_library
This is a C library for the SHT1X Temperature-Humidity sensor for the esp-idf framework
Language: C - Size: 687 KB - Last synced at: 5 months ago - Pushed at: almost 4 years ago - Stars: 2 - Forks: 0
Tob1as/rpi-sensors
Raspberry Pi Sensors (DHT22 / AM2302)
Language: Python - Size: 41 KB - Last synced at: about 1 month ago - Pushed at: 7 months ago - Stars: 4 - Forks: 1
AlexIII/weather-node
A small battery-powered BLE temperature and humidity sensor with Android app.
Language: C - Size: 3.03 MB - Last synced at: 8 days ago - Pushed at: over 2 years ago - Stars: 10 - Forks: 2
m-ghozi/monitoring-esp32-dht22
Language: C++ - Size: 8.79 KB - Last synced at: 3 months ago - Pushed at: 12 months ago - Stars: 0 - Forks: 0
bartekl1/rpi-thermometer
:thermometer: Raspberry Pi Thermometer
Language: Python - Size: 119 KB - Last synced at: 3 months ago - Pushed at: about 1 year ago - Stars: 0 - Forks: 2
sparkfun/SparkFun_RHT03_Arduino_Library
A simple library for RHT03 temperature and humidity sensor, which communicates over a 1-wire digital interface.
Language: C++ - Size: 12.7 KB - Last synced at: about 2 months ago - Pushed at: over 3 years ago - Stars: 10 - Forks: 2
tarbax/SNOS
Sensor Node On Steroids
Size: 59.6 KB - Last synced at: 3 months ago - Pushed at: over 3 years ago - Stars: 11 - Forks: 1
mcauser/micropython-hdc1080
MicroPython driver for the HDC1080 temperature and humidity sensor
Language: Python - Size: 1.28 MB - Last synced at: 9 days ago - Pushed at: over 1 year ago - Stars: 2 - Forks: 1
Remboooo/moldyshed
ESPhome script to use two moisture sensors and a fan to monitor and reduce moisture in a shed
Language: C++ - Size: 21.5 KB - Last synced at: 9 months ago - Pushed at: 9 months ago - Stars: 0 - Forks: 0
Dmathz16/vertical-hydroponics-farming
Vertical Hydroponics Farming System
Language: C++ - Size: 4.88 KB - Last synced at: 1 day ago - Pushed at: about 1 year ago - Stars: 1 - Forks: 0
marcoradocchia/datalogger
Humidity & Temperature CLI datalogger for DHT22 sensor on Raspberry Pi.
Language: Rust - Size: 72.3 KB - Last synced at: 4 months ago - Pushed at: almost 3 years ago - Stars: 3 - Forks: 0
flrrth/pico-htu21d
This is a MicroPython library for the Raspberry Pi Pico and the HTU21D Digital Relative Humidity sensor with Temperature output.
Language: Python - Size: 279 KB - Last synced at: 3 months ago - Pushed at: over 2 years ago - Stars: 3 - Forks: 2
alankrantas/pxt-DHT11_DHT22 📦
BBC micro:bit MakeCode extension for DHT11/DHT22 humidity and temperature sensors
Language: TypeScript - Size: 77.1 KB - Last synced at: 3 months ago - Pushed at: over 4 years ago - Stars: 9 - Forks: 12
tshaddack/chip_SHT30
SHT30 temperature/humidity sensor readout
Language: C - Size: 18.6 KB - Last synced at: 2 months ago - Pushed at: 10 months ago - Stars: 0 - Forks: 0
handiko/Arduino-TFT-LCD
Displaying DHT11 sensor readings onto TFT LCD ILI9341
Language: C++ - Size: 743 KB - Last synced at: 2 months ago - Pushed at: about 5 years ago - Stars: 1 - Forks: 0
tavorbesser/CVI-LabWindows-Project
User interface for monitoring Environmental conditions over time
Language: C - Size: 3.35 MB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 1 - Forks: 0
MaverickST/Greenhouse
Greehouse project
Language: C++ - Size: 12.7 KB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 0 - Forks: 0
flrrth/pico-dht20
This is a MicroPython library for the Raspberry Pi Pico and the DHT20 temperature and humidity sensor.
Language: Python - Size: 258 KB - Last synced at: 3 months ago - Pushed at: over 2 years ago - Stars: 19 - Forks: 5
cgasper79/ESP_temp_MQTT-TLS
Temperature and humidity sensor with Wemos D1 mini (Esp8266) - Mqtt TLS - Home Assistant Discovery
Language: C++ - Size: 157 KB - Last synced at: 11 months ago - Pushed at: 11 months ago - Stars: 0 - Forks: 0
Dwiyogalaksana/Monitoring-Suhu-dan-Kelembaban
Merupakan sebuah project monitoring suhu dan kelembaban yang terintegrasi dengan Database MySQL dan Website
Language: Hack - Size: 72.3 KB - Last synced at: 11 months ago - Pushed at: 11 months ago - Stars: 0 - Forks: 0
loopassembly/GreenSage
🌿 GreenSage: Because the world needs more sage advice... about plants. Dive into the labyrinth of foliage management with unparalleled wit and wisdom. Because who doesn't love a little greenery in their code? 🪴💻
Language: Makefile - Size: 373 MB - Last synced at: 10 months ago - Pushed at: 11 months ago - Stars: 2 - Forks: 1
xunicatt/stm32-dht11-driver
dht11 driver for stm32
Language: C - Size: 4.88 KB - Last synced at: 11 months ago - Pushed at: 11 months ago - Stars: 0 - Forks: 0
bauer-andreas/homebridge-http-humidity-sensor
Http humidity sensor for Homebridge: https://github.com/homebridge/homebridge
Language: JavaScript - Size: 270 KB - Last synced at: 3 days ago - Pushed at: over 2 years ago - Stars: 13 - Forks: 5
maarten-pennings/ENS210
Arduino library for the ENS210 relative humidity and temperature sensor with I2C interface from ams
Language: C++ - Size: 335 KB - Last synced at: 12 months ago - Pushed at: 12 months ago - Stars: 5 - Forks: 2
duncanleo/hc-mqtt-temperature
HomeKit temperature & humidity sensor (via MQTT)
Language: Go - Size: 22.5 KB - Last synced at: 12 months ago - Pushed at: over 5 years ago - Stars: 0 - Forks: 0
duncanleo/hc-http-temperature 📦
HomeKit temperature and humidity sensor (via HTTP)
Language: Go - Size: 22.5 KB - Last synced at: 12 months ago - Pushed at: over 3 years ago - Stars: 0 - Forks: 0
PanosTsakonas/Plant-Irrigation-System
Plant Irrigation System
Language: C++ - Size: 117 KB - Last synced at: 12 months ago - Pushed at: 12 months ago - Stars: 1 - Forks: 0
sudhi001/SmartTerrarium
This project aims to automate an in-house terrarium using IoT technology. The goal is to maintain optimal conditions within the terrarium by automatically spraying or pouring water based on the atmospheric temperature and soil humidity.
Language: C++ - Size: 61.5 KB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 1 - Forks: 0
yoanad/histories_and_futures_of_tech
Language: Python - Size: 930 KB - Last synced at: about 1 year ago - Pushed at: over 5 years ago - Stars: 0 - Forks: 0
Fabmobil/Pflanzensensor
Ein Pflanzensensor der Bodenfeuchte, Luftfeuchte, Lufttemperatur und Lichtstärke misst und dir über sein Display oder eine Telegram-Nachricht Bescheid gibt, wenn deine Pflanze dich braucht❣️
Language: C - Size: 9.75 MB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 1 - Forks: 0
sziller/_raspi_roommanager
RaspberryPi mounted smart home application. Room manager client for a decentralized, self custodial Smart home setup.
Language: Python - Size: 122 KB - Last synced at: 3 months ago - Pushed at: about 1 year ago - Stars: 0 - Forks: 0
sarthak268/Multipurpose-Rover
This repository contains files for 'Multipurpose Rover' project done as a part of Introduction to Engineering Design course.
Size: 3.76 MB - Last synced at: about 1 year ago - Pushed at: over 6 years ago - Stars: 4 - Forks: 1
deneyapkart/deneyap-sicaklik-nem-basinc-olcer-arduino-library
Arduino library for Deneyap Temperature&Humidity, Barometer Sensor SHT4X
Language: C++ - Size: 13.7 KB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 1 - Forks: 0
Dityaren/Smart-Garden-IoT-System
An IoT project using ESP8266 microcontroller to monitor and control a garden. Track soil moisture, water tank level, and environmental conditions. Remotely control your garden via the Blynk app
Language: C++ - Size: 449 KB - Last synced at: 3 months ago - Pushed at: about 1 year ago - Stars: 0 - Forks: 0
womoak75/OpenDew
temperature / humidity / dew point controlled ventilation system running on OpenWrt
Language: Shell - Size: 37.1 KB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 0 - Forks: 0
birrozza/ESP8266_Sensor_BME280
Project for BME280 Sensor & ESP8266 (Wemos D1 mini clone)
Language: HTML - Size: 438 KB - Last synced at: about 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 1
citriena/humidityHS15P
HS15Pを使った湿度測定用Arduinoライブラリ
Language: C++ - Size: 19.5 KB - Last synced at: about 1 year ago - Pushed at: almost 4 years ago - Stars: 0 - Forks: 0
maspetsberger/rust-esp32-bme280
Measuring temperature, humidity, and pressure with an BME280 on an ESP32 in Rust.
Language: Rust - Size: 4.88 KB - Last synced at: 2 months ago - Pushed at: about 3 years ago - Stars: 3 - Forks: 0
