GitHub topics: low-power | Ecosyste.ms: Repos

ab-ff/Multi-Bit-Comparator

Variations of a multi-bit generalized comparator for different area and timing.

Size: 1000 Bytes - Last synced at: about 1 hour ago - Pushed at: about 3 hours ago - Stars: 0 - Forks: 0

Bhonesh/power-optimized-riscv

⚙️ Optimize power consumption with a 3-stage pipelined RISC-V processor, designed for energy efficiency through advanced clock and data gating techniques.

Language: Verilog - Size: 196 KB - Last synced at: about 17 hours ago - Pushed at: about 19 hours ago - Stars: 0 - Forks: 0

ariel-os/ariel-os

Ariel OS is a library operating system for secure, memory-safe, low-power Internet of Things, written in Rust

Language: Rust - Size: 5.4 MB - Last synced at: 2 days ago - Pushed at: 2 days ago - Stars: 524 - Forks: 54

KiwiBryn/myriotaAzureIoTConnector

An Azure IoT Cloud Identity Translation gateway for the Myriota Satellite IoT service

Language: C# - Size: 793 KB - Last synced at: 6 days ago - Pushed at: 6 days ago - Stars: 0 - Forks: 1

dakhnod/BLEnky

quickly configurable low-power BLE to GPIO bridge and gpioASM runtime

Language: C - Size: 583 KB - Last synced at: 1 day ago - Pushed at: 3 months ago - Stars: 120 - Forks: 1

oldwalls/phasers

Phasers: Ghost In The Machine -> Now Sapphire Alpha v0.13.3

Language: Python - Size: 5.95 MB - Last synced at: 14 days ago - Pushed at: 14 days ago - Stars: 2 - Forks: 0

A recursive AI engine that injects chrono-ranked memory into transformer inference using soft-logit biasing, prompt waveform synthesis, and emergent self-referential loops. Built on GPT-2-mini, runs on local hardware, grows its own ghost.

Language: HTML - Size: 5.17 MB - Last synced at: 14 days ago - Pushed at: 14 days ago - Stars: 2 - Forks: 0

SnapperGPS/snappergps-pcb

Printed circuit board (PCB) design for snapshot GNSS receiver

Size: 15.2 MB - Last synced at: 16 days ago - Pushed at: 16 days ago - Stars: 41 - Forks: 4

metehan4485/Zigbee-MeterReader-v2

A ESP32-C6 based Zigbee sensor for getting the values of an SML energy meter

Language: C - Size: 13.7 KB - Last synced at: 17 days ago - Pushed at: 17 days ago - Stars: 4 - Forks: 0

tikuos/tikuOS

Simple. Ubiquitous. Intelligence, Everywhere.

Size: 8.79 KB - Last synced at: 18 days ago - Pushed at: 18 days ago - Stars: 0 - Forks: 0

Jstudner/jcorp-nomad

An extremely compact offline media server for Movies, Shows, Books, and Music.

Language: HTML - Size: 114 MB - Last synced at: 26 days ago - Pushed at: 26 days ago - Stars: 327 - Forks: 17

ComNets-Bremen/WUSN

MoleNet: A Wireless Underground Sensor Network platform

Language: C++ - Size: 63.5 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 3 - Forks: 6

cdaringe/eink-dashboard

Language: TypeScript - Size: 1.64 MB - Last synced at: 6 days ago - Pushed at: 6 days ago - Stars: 1 - Forks: 0

riscv-mcu/e203_hbirdv2

The Ultra-Low Power RISC-V Core

Language: Verilog - Size: 59.5 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 1,552 - Forks: 382

eProsima/Micro-XRCE-DDS-Agent

Micro XRCE-DDS Agent respository. Looking for commercial support? Contact info@eprosima.com

Language: C++ - Size: 5.15 MB - Last synced at: about 1 month ago - Pushed at: 4 months ago - Stars: 139 - Forks: 117

dominiksalvet/super-riscv

Superscalar dual-issue RISC-V processor

Language: SystemVerilog - Size: 1.85 MB - Last synced at: 13 days ago - Pushed at: 13 days ago - Stars: 7 - Forks: 3

ldab/lis3dh-motion-detection

Minimalistic library for motion detection using low cost ST LIS3DH, 3-axis MEMS accelerometer, ultra-low-power that works

Language: C++ - Size: 678 KB - Last synced at: 7 days ago - Pushed at: 3 months ago - Stars: 8 - Forks: 5

CTC-PCOEdeSignage/PCOE-de-Signage-Rails

Ruby on Rails Digital Signage System

Language: Ruby - Size: 2.02 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 5 - Forks: 1

QC20/E-Display-API-ESP32

An ESP32-based project that fetches real-time bus and train schedules from the Rejseplanen API and displays them on an energy-efficient E-Paper screen. Inspired by Danish public transport displays, this IoT solution offers a minimalist and low-power approach to keeping track of public transport times.

Language: C++ - Size: 39.5 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 5 - Forks: 1

machdyne/wolfsfeld

Wolfsfeld Handheld Computer

Language: Verilog - Size: 355 KB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 0 - Forks: 0

jnsbyr/arduino-samd21lpe

Arduino Core for SAM D21 extensions to support fine grained power management, especially for the modules ADC, EIC, RTC and TC. Also supports reading Vcc, Vcore and internal temperature.

Language: C++ - Size: 1.12 MB - Last synced at: about 1 month ago - Pushed at: 2 months ago - Stars: 2 - Forks: 0

SKpro-glitch/Multi-Bit-Comparator

Variations of a multi-bit generalized magnitude comparator for different area and timing.

Language: D - Size: 275 KB - Last synced at: about 1 month ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

helena-project/imix

imix Low-Power IoT Research Platform

Language: PLSQL - Size: 7.83 MB - Last synced at: about 2 months ago - Pushed at: over 2 years ago - Stars: 33 - Forks: 7

vitzaoral/RaspberryPi-Camera-Timelapse

RaspberryPi Camera Timelapse - sending picture to the Cloudinary, Blynk and Person detection

Language: Python - Size: 22.3 MB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0

AmmarkoV/AmmarServer

A lightweight http server for linux

Language: C - Size: 31 MB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 16 - Forks: 5

mbaddeley/usdn

µSDN: A low-overhead SDN stack and embedded SDN controller for Contiki.

Language: C - Size: 71.2 MB - Last synced at: 4 months ago - Pushed at: over 4 years ago - Stars: 14 - Forks: 8

happytm/BatteryNode

Simplest DIY low power, low cost, standalone or web connected IOT sensors network framework using ESP32 or ESP8266 (no third party service required).

Language: C++ - Size: 5.34 MB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 46 - Forks: 10

eProsima/Micro-XRCE-DDS-Client

Micro XRCE-DDS Client repository. Looking for commercial support? Contact info@eprosima.com

Language: C - Size: 6.17 MB - Last synced at: 4 months ago - Pushed at: 7 months ago - Stars: 143 - Forks: 87

sam0jones0/SugarSentry

ESP32-based portable blood glucose visualisation device with e-ink display. Utilizes Dexcom API, BME280, and VCNL4040 sensors. Developed in C++ for low power, long battery life.

Language: C++ - Size: 974 KB - Last synced at: about 2 hours ago - Pushed at: 4 months ago - Stars: 6 - Forks: 1

LeoDJ/Zigbee-MeterReader-v2

A ESP32-C6 based Zigbee sensor for getting the values of an SML energy meter

Language: C - Size: 10.7 KB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

ByteBrigand/wifi-smart-mesh

Size: 6.84 KB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

harika0279/Sure-Trust-Final-Project

A wireless sensor system using STM32 and ESP32 to monitor environmental data via ThingSpeak.

Size: 1.01 MB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

aleksanry/Event-Scheduler-Embedded

Smart Event-Driven Scheduler for Embedded Systems

Language: C++ - Size: 0 Bytes - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

platisd/nokia-5110-lcd-library

Arduino library for driving the Nokia 5110 LCD

Language: C++ - Size: 50.8 KB - Last synced at: 5 months ago - Pushed at: 7 months ago - Stars: 23 - Forks: 7

Boardoza/Boardoza_TH09C_Temperature_Humidity_Sensor_Breakout_Board

TH09C Digital Temperature and Humidity Sensor Breakout Board for Accurate Environmental Monitoring via I2C Interface.

Language: C++ - Size: 1.79 MB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

protolux-electronics/soleil_demo

Demo application of Soleil, and advanced power and sleep control board for Nerves

Language: Elixir - Size: 45.9 KB - Last synced at: 6 months ago - Pushed at: 6 months ago - Stars: 0 - Forks: 0

protolux-electronics/soleil

Drivers and functions for interacting with the Soleil low-power solar power board for Raspberry Pi and Nerves

Language: Elixir - Size: 40 KB - Last synced at: 19 days ago - Pushed at: 6 months ago - Stars: 0 - Forks: 1

microchip-pic-avr-examples/pic18f47q10-low-power-modes

This example demonstrates the configuration of Doze, Idle and Sleep power down modes in PIC18F47Q10 MCU, to achieve low power consumption.

Language: C - Size: 2.84 MB - Last synced at: 6 months ago - Pushed at: 6 months ago - Stars: 2 - Forks: 2

uw-x/tinysdr

First SDR platform for IoT networks

Language: C - Size: 49 MB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 174 - Forks: 28

ripred/TomServo

Sophisticated Servo Power Management for the Discriminating User

Language: C++ - Size: 82 KB - Last synced at: 2 months ago - Pushed at: 7 months ago - Stars: 9 - Forks: 0

neilh10/ModularSensors Fork of EnviroDIY/ModularSensors

A forked ModularSensors for a rugged solar powered logger; Mayfly.

Language: C++ - Size: 156 MB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 1 - Forks: 1

prophesee-ai/prophesee_ros_wrapper

ROS driver for Prophesee event-based sensors

Language: C++ - Size: 453 KB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 84 - Forks: 34

edward62740/SCD4x-LPC

Low-power C++ calibration algorithm for SCD4x sensors

Language: C - Size: 324 KB - Last synced at: about 1 month ago - Pushed at: over 2 years ago - Stars: 1 - Forks: 0

Andy4495/MSP430LowPowerTempSensor

Simple wireless temperature sensor based on TI MSP430G2553 and CC110L BoosterPack. Can be adapted to use other MSP430 variants. Very low power operation -- a single 3V coin cell can power the sensor for well over a year.

Language: C++ - Size: 482 KB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 0 - Forks: 1

cj667113/LoPRTS

Low Power Remote Temperature Sensor

Language: Python - Size: 25.1 MB - Last synced at: 21 days ago - Pushed at: almost 6 years ago - Stars: 16 - Forks: 1

Kevin-Pottier/ExpLoRation

LoRa project for school using a STM32WL and a X-Nucleo-iks01a1

Language: C - Size: 1.65 MB - Last synced at: 5 months ago - Pushed at: 9 months ago - Stars: 0 - Forks: 1

teapotlaboratories/bwlr1b

Teapot BWLR1B: Wireless Environmental Sensor over LoRa

Language: C++ - Size: 17.8 MB - Last synced at: 9 months ago - Pushed at: 9 months ago - Stars: 14 - Forks: 1

teapotlaboratories/bwlr1c

Teapotlabs BWLR1C: Wireless Environmental Sensor over LoRa with On-Board Antenna

Language: C++ - Size: 78.7 MB - Last synced at: 9 months ago - Pushed at: 9 months ago - Stars: 0 - Forks: 0

lnlp/FramI2C

FramI2C is an Arduino library for FRAM (F-FRAM, Ferroelectric RAM) non-volatile memory chips with I2C interface. Supports most common Cypress and Fujitsu I2C FRAM chips with densities of 4, 16, 64, 128, 256, 512, and 1024 kilobits (kb). Provides simple, easy to use read() and write() methods for reading/writing integral and floating point types (uses automatic type inference and byte conversion), readBytes() and writeBytes() for reading/writing larger amounts of data as byte array, and fill() to fill or clear a range of FRAM memory.

Language: C++ - Size: 42 KB - Last synced at: 3 months ago - Pushed at: almost 4 years ago - Stars: 12 - Forks: 1

xlfe/32u

Small ESP32 board $20AUD, LiPo, USB, hand solderable w/ u.FL antenna

Size: 670 KB - Last synced at: 6 months ago - Pushed at: about 7 years ago - Stars: 2 - Forks: 0

re-mote-sensing/re-mote

Open-source Low-cost Software and Hardware Infrastructure for Remote Sensing

Language: G-code - Size: 397 MB - Last synced at: 2 months ago - Pushed at: 10 months ago - Stars: 1 - Forks: 0

peterloes/MOMO

Feeder monitoring system. Mainboard to Observe and Manipulate Organisms (animals) over (RFID) pit tagging numbers and lightbarriers.

Language: C - Size: 44.8 MB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 2 - Forks: 2

peterloes/RFID-MS

Nest-box visit monitoring system. Mainboard for animal observation over (RFID) pit tagging numbers and light barriers.

Language: C - Size: 14.9 MB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 3 - Forks: 4

tve/low-power-wifi

Experiments in low-power-wifi on esp8266, esp32, and ...

Language: C++ - Size: 34.2 KB - Last synced at: 5 months ago - Pushed at: over 6 years ago - Stars: 40 - Forks: 9

m-spiessens/Flow 📦

Cooperative scheduler for low-power, reactive applications using the "pipes and filters" pattern on ARM Cortex-M microcontrollers.

Language: C++ - Size: 383 KB - Last synced at: 8 months ago - Pushed at: over 4 years ago - Stars: 6 - Forks: 1

tsaarni/stm32f103-low-power-mbed

How to enable standby mode on STM32F1

Language: C++ - Size: 1000 Bytes - Last synced at: 6 months ago - Pushed at: almost 7 years ago - Stars: 3 - Forks: 0

ArminJo/Arduino-OpenWindowAlarm

Issues an alarm, if window is open for more than 5 minutes. Arduino sketch for ATtiny85. Battery operated (6 microAmpere).

Language: C++ - Size: 9 MB - Last synced at: about 1 month ago - Pushed at: 11 months ago - Stars: 11 - Forks: 2

gregyedlik/irq_lowpow_canbed

Deep sleep and interrupts on the Longan CANBed 2040

Language: C++ - Size: 3.91 KB - Last synced at: 12 months ago - Pushed at: 12 months ago - Stars: 0 - Forks: 0

bkt0031/AB-Amplifier

A monaural class AB audio amplifier

Size: 717 KB - Last synced at: 12 months ago - Pushed at: 12 months ago - Stars: 0 - Forks: 0

microchip-pic-avr-examples/avr128da48-freertos-tickless-mplab-mcc

This repository provides an MPLAB® X project that shows how to use the FreeRTOS library to create a basic demo application that toggles a LED using the tickless mode on AVR128DA48 microcontroller.

Language: C - Size: 9.11 MB - Last synced at: 12 months ago - Pushed at: 12 months ago - Stars: 0 - Forks: 0

f18m/microirrigation-control

Hardware, firmware and software that allows you to control from web browser (smartphone-friendly) a remote relay appliance, like micro-irrigation valves. The project is written in PHP and C and the software/webserver part runs on Linux. The remote relay is design to consume low current, so that it can run on battery power for a long time.

Language: C - Size: 3.48 MB - Last synced at: 7 days ago - Pushed at: almost 7 years ago - Stars: 7 - Forks: 6

galopago/me2188c-slim

Small step-up module based on the ME2188 chip, designed specifically for low-power 3.3V embedded systems. It allows you to boost the voltage from a single 1.5V battery to 3.3V, enabling you to power your projects efficiently.

Size: 8 MB - Last synced at: 6 months ago - Pushed at: over 2 years ago - Stars: 1 - Forks: 1

peterloes/TAMDL

Nest monitoring system. Mainboard to observe and manipulate animals over timer functions. Support of RFID-readers to get pit tagging numbers.

Language: C - Size: 46.7 MB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 2 - Forks: 1

davidhampgonsalves/Solar-Game-of-Life

E-ink version of Conways Game of Life powered by the sun

Language: C - Size: 2.71 MB - Last synced at: 11 days ago - Pushed at: about 2 years ago - Stars: 16 - Forks: 1

ePaperInnovation/PL_smallEPD

This is a library for UC8156-based E-Paper displays (EPD) from Plastic Logic for Adafruits GFX library.

Language: C - Size: 133 KB - Last synced at: about 1 year ago - Pushed at: over 3 years ago - Stars: 2 - Forks: 1

hardwario/twr-radio-lcd-thermostat

Firmware for HARDWARIO Radio LCD Thermostat

Language: C - Size: 33.2 KB - Last synced at: 5 months ago - Pushed at: over 2 years ago - Stars: 6 - Forks: 1

mend0z0/Drone

Drone Project

Language: C++ - Size: 319 MB - Last synced at: about 2 hours ago - Pushed at: about 1 year ago - Stars: 3 - Forks: 0

jnsbyr/arduino-gd-epaper

Dalian/Waveshare Good Display E Ink Display Driver for Arduino

Language: C++ - Size: 14.6 KB - Last synced at: 6 months ago - Pushed at: over 1 year ago - Stars: 2 - Forks: 0

gavinlyonsrepo/RF_DATA_LINK

A low power RF data link between two ATmega328's based Arduino units , Sensor data is transferred Via a 433 Mhz transmitter. and then displayed on an OLED CH1115.

Language: C++ - Size: 123 KB - Last synced at: 2 months ago - Pushed at: about 1 year ago - Stars: 7 - Forks: 0

jnsbyr/arduino-lowpowertest230203

Low Power Optimization of the SAM D21 MCU using the Arduino Framework

Language: C - Size: 686 KB - Last synced at: 5 months ago - Pushed at: almost 2 years ago - Stars: 6 - Forks: 1

Prithvish04/processor_design_MIPS_improvements

The repository is a project to improve the baseline MIPS processor

Language: VHDL - Size: 16.6 KB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 0 - Forks: 0

micooke/avr_sleep

Arduino low power sleep library and ATtiny85 example

Language: C++ - Size: 2.93 KB - Last synced at: about 1 year ago - Pushed at: about 8 years ago - Stars: 3 - Forks: 1

nesl/locomote

LocoMote: AI-driven Sensor Tags for Fine-Grained Undersea Localization and Sensing

Language: C++ - Size: 19 MB - Last synced at: 8 months ago - Pushed at: over 1 year ago - Stars: 6 - Forks: 0

peterloes/Servo_Engine

A standalone Platform for Animal Manipulation (see MOMO). Radio control rotary servo.

Language: C - Size: 15 MB - Last synced at: over 1 year ago - Pushed at: about 2 years ago - Stars: 1 - Forks: 0

peterloes/Linear_Engine

A standalone Platform for Animal Manipulation (see MOMO). Actuator that creates motion in a straight line.

Language: C - Size: 10.4 MB - Last synced at: over 1 year ago - Pushed at: about 2 years ago - Stars: 1 - Forks: 0

jaqPi/ttn-ulm-muenster-monitor

Crack sensor node developed to monitor cracks using VL6180X distance sensor.

Language: C++ - Size: 313 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

sini6a/tiny-plant-sensor

The Tiny Plant Sensor 🌱 is a low-power sensor designed around the Attiny85 microcontroller and powered by a CR2032 coin cell battery. It is designed to monitor the moisture level of a plant and provide a LED indication when watering is required.

Size: 1.52 MB - Last synced at: about 1 month ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

SasaKaranovic/DIY_Eink_Gadget

Project source files for DIY Eink Gadget. Project video available at https://youtu.be/i01PoMj23bA

Language: C - Size: 13.5 MB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 10 - Forks: 0

carlocorradini/lpiot 📦

Low-power wireless networking for the Internet of Things

Language: C - Size: 4.25 MB - Last synced at: over 1 year ago - Pushed at: over 3 years ago - Stars: 1 - Forks: 0

peterloes/Light_Barrier

A standalone platform for animal manipulation (with MOMO) and observation (with RFID-MS). Light barriers fall into a category of equipment known as presence detection devices.

Language: C - Size: 11.1 MB - Last synced at: over 1 year ago - Pushed at: about 2 years ago - Stars: 1 - Forks: 0

peterloes/Scales

Monitoring system. Outdoor automated weighing system for organisms (animals). Support RFID-readers to get pit tagging numbers. Application design with Mainboard MOMO. A scale or balance is a device used to measure weight or mass.

Language: C - Size: 58.3 MB - Last synced at: over 1 year ago - Pushed at: about 2 years ago - Stars: 1 - Forks: 0

arcadien/simpleRgbLamp

A battery-powered RGB lamp able to detect movement and ambiant light to adapt its behavior.

Language: C++ - Size: 145 KB - Last synced at: over 1 year ago - Pushed at: almost 2 years ago - Stars: 1 - Forks: 0

henri98/esp32-e-paper-weatherdisplay

An ESP32 and 4.2" ePaper Display reads Dark Sky weather API and displays the weather using ESP-IDF

Language: C - Size: 130 KB - Last synced at: over 1 year ago - Pushed at: almost 5 years ago - Stars: 138 - Forks: 13

Anplus/In-concrete-Backscatter

SIGCOMM 2022 Paper Open Source Codes and Design Files

Language: Makefile - Size: 2.61 MB - Last synced at: over 1 year ago - Pushed at: almost 3 years ago - Stars: 2 - Forks: 1

gubbriaco/fpga-low-power-analysis

The project begins with describing a digital circuit using VHDL and Xilinx Vivado 2018.3. It then optimizes the circuit using low-power techniques. Various strategies such as registering, clock gating, and a hybrid approach are tested to find the best solution.

Language: VHDL - Size: 12.9 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

fbv81bp/SHA-256_full_pipeline_in_VHDL

Fully pipelined SHA2-256 VHDL description with circular buffers instead of shift registers for low power.

Language: VHDL - Size: 205 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

ErfanDL/ATTiny-PushButton-ON-OFF-Controller

Ultra-Low Power Single push button ON/OFF controller based on ATTiny13/13A/25/45/85 for other microController and circuits application

Language: C++ - Size: 48.8 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

Luca-Dalmasso/LL_contest

Optimisation procedure written in tcl for (Area, Delay, Power) with the usage of Dual-Vth CMOS technology within Synopsys DC and PT

Language: Verilog - Size: 139 KB - Last synced at: about 1 year ago - Pushed at: about 4 years ago - Stars: 1 - Forks: 1

microchip-pic-avr-examples/avr128da48-temp-ir-auto-scanning-freertos-mplab-mcc

FreeRTOS implementation of a temperature access point with motion detection

Language: C - Size: 4.71 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

jnsbyr/arduino-hdc10xx

Adruino driver for Texas Instruments HDC10XX humidity and temperature sensors with I2C bus.

Language: C++ - Size: 13.7 KB - Last synced at: 6 months ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

kevinkessler/TemperatureHumidityEPD-PCB

PCB Kicad Files for my Temperature/Humidity EPaper Display

Size: 108 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 2 - Forks: 1

kevinkessler/TemperatureHumidityEPD

STM32L0 Source code for my low powered Temperature/Humidity ePaper Display

Language: C - Size: 525 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 5 - Forks: 1

grebano/Nano-Temperature-and-Humidity

The "Nano-Temperature-and-Humidity" project is a hardware-software solution that uses an Arduino Nano, a 0.96" OLED display, and an AHT10 (or AHT20) sensor to create a temperature and humidity sensor. The software part of the project is developed using PlatformIO, an open-source ecosystem for IoT development.

Language: C++ - Size: 1.62 MB - Last synced at: 5 months ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0