BryceWDesign/TeslaRake

TeslaRake is an open-source project aimed at developing innovative, efficient energy harvesting methods inspired by Tesla's technologies, designed for sustainable power generation and deployment in diverse environments.

Size: 32.2 KB - Last synced at: about 4 hours ago - Pushed at: about 5 hours ago - Stars: 1 - Forks: 0

lab11/socitrack

A wearable platform for social interaction studies

Language: C - Size: 357 MB - Last synced at: about 11 hours ago - Pushed at: about 12 hours ago - Stars: 20 - Forks: 15

ohmpi/ohmpi

OhmPi fork from gitlab

Language: HTML - Size: 726 MB - Last synced at: about 20 hours ago - Pushed at: about 21 hours ago - Stars: 0 - Forks: 0

anway0404/Arduino_OpenTherm_shield

Arduino hardware shield to send and receive data from Opentherm devices

Size: 2.56 MB - Last synced at: 1 day ago - Pushed at: 1 day ago - Stars: 0 - Forks: 0

quartiq/stabilizer

Firmware and software for the Sinara Stabilizer module with high speed, low latency ADC/DAC data processing and powerful DSP algorithms in between

Language: Rust - Size: 7.88 MB - Last synced at: 2 days ago - Pushed at: 2 days ago - Stars: 124 - Forks: 28

therealdreg/okhi

Open Keylogger Hardware Implant - USB & PS2 Keyboards

Language: C - Size: 389 MB - Last synced at: 3 days ago - Pushed at: 3 days ago - Stars: 72 - Forks: 12

tjhorner/upsy-desky

Make your standing desk smarter

Language: Shell - Size: 2.43 MB - Last synced at: 1 day ago - Pushed at: 1 day ago - Stars: 632 - Forks: 41

pr3y/Bruce

Predatory ESP32 Firmware

Language: C - Size: 4.09 GB - Last synced at: 4 days ago - Pushed at: 4 days ago - Stars: 2,575 - Forks: 378

borneo-iot/borneo

The ultimate open-source aquarium LED and other smart aquatic devices

Language: Dart - Size: 28 MB - Last synced at: 5 days ago - Pushed at: 5 days ago - Stars: 44 - Forks: 4

sini6a/internet-radio-speaker

An open-source ESP32 Internet Radio Player with simple programming, USB charging, and on-the-go capability using a single-cell Li-ion battery.

Language: C++ - Size: 6.21 MB - Last synced at: 5 days ago - Pushed at: 5 days ago - Stars: 2 - Forks: 0

agkaminski/ZAK180

DIY all-in-keyboard computer featuring Z180 and floppy drive

Language: C - Size: 60.2 MB - Last synced at: 7 days ago - Pushed at: 7 days ago - Stars: 0 - Forks: 0

delftopenhardware/awesome-open-hardware

🛠Helpful items for making open source hardware projects.

Size: 43 KB - Last synced at: 7 days ago - Pushed at: over 1 year ago - Stars: 533 - Forks: 23

GliaX/Stethoscope

A research-validated stethoscope whose plans are available Freely and openly. The cost of the entire stethoscope is between $2.5 to $5 to produce

Language: Ruby - Size: 57.3 MB - Last synced at: 4 days ago - Pushed at: over 1 year ago - Stars: 751 - Forks: 100

jhmcaleely/conway-life-display

Conway’s Life, on an LED cube

Language: C - Size: 513 KB - Last synced at: 10 days ago - Pushed at: 10 days ago - Stars: 0 - Forks: 0

LIBREhub/LIBREhub.github.io

This is repository for LIBRE hub project web page. We use Jekyll to run our GitHub page.

Language: HTML - Size: 474 MB - Last synced at: 12 days ago - Pushed at: 12 days ago - Stars: 3 - Forks: 1

LilisProtoLab/osii_MRI

Documentation for building the open source ultra low-field MRI at Utrecht University

Language: Python - Size: 120 MB - Last synced at: 13 days ago - Pushed at: 13 days ago - Stars: 3 - Forks: 4

wntrblm/Castor_and_Pollux

A Juno-inspired dual oscillator

Language: C - Size: 161 MB - Last synced at: 14 days ago - Pushed at: 14 days ago - Stars: 543 - Forks: 45

Wakoma/nimble

The nimble. An open source, rapidly deployable, wireless mesh network.

Language: Python - Size: 55.2 MB - Last synced at: 10 days ago - Pushed at: 10 days ago - Stars: 76 - Forks: 10

wenzel-lab/wenzel-lab.github.io Fork of parotlab/parotlab.github.io

Jekyll page for Wenzel Lab webpage. View the page at https://wenzel-lab.github.io

Language: HTML - Size: 221 MB - Last synced at: 14 days ago - Pushed at: 14 days ago - Stars: 1 - Forks: 0

tillitis/tillitis-key1

FPGA verilog and firmware for TKey, the flexible and open USB security key 🔑

Language: C - Size: 20.5 MB - Last synced at: 13 days ago - Pushed at: 13 days ago - Stars: 408 - Forks: 28

Cesarziraci/Altair-Embedded-Sensor-Node

Altair is a development board based on the RP2040 microcontroller.

Language: HTML - Size: 10.4 MB - Last synced at: 16 days ago - Pushed at: 16 days ago - Stars: 0 - Forks: 0

wenzel-lab/syringe-pumps-and-controller

Design of 3d printable syringe pumps and dual controller.

Language: JavaScript - Size: 343 MB - Last synced at: 19 days ago - Pushed at: 19 days ago - Stars: 5 - Forks: 1

reiserlab/Fly-Lab-Gear

This is where the Reiser Lab and colleagues are sharing tools and methods that are useful for lab experiments with _Drosophila_ neurobiology.

Language: HTML - Size: 296 MB - Last synced at: 19 days ago - Pushed at: 19 days ago - Stars: 16 - Forks: 7

lab11/polypoint

Indoor localization based on the DecaWave DW1000.

Language: C - Size: 32.4 MB - Last synced at: about 11 hours ago - Pushed at: almost 6 years ago - Stars: 141 - Forks: 53

michpro/mikroBUS

Collection of add-on boards in mikroBUS™ standard

Language: HTML - Size: 20.9 MB - Last synced at: 20 days ago - Pushed at: 20 days ago - Stars: 0 - Forks: 0

open-ephys/bonsai-onix1

Bonsai library for the Open Ephys Onix Acquisition System

Language: C# - Size: 1.77 MB - Last synced at: 2 days ago - Pushed at: 6 days ago - Stars: 6 - Forks: 4

michpro/Arduino_LMeter_shield

Arduino Inductance Meter shield

Size: 3.23 MB - Last synced at: 19 days ago - Pushed at: 22 days ago - Stars: 0 - Forks: 0

kitspace/kitspace 📦

A place to share electronics projects

Language: JavaScript - Size: 25.8 MB - Last synced at: 6 days ago - Pushed at: 3 months ago - Stars: 263 - Forks: 89

fabiansteiner/PlantGuard

3D-Printable Irrigation Computer with soil moisture sensor

Language: HTML - Size: 3.17 MB - Last synced at: 24 days ago - Pushed at: 24 days ago - Stars: 1 - Forks: 0

funkeleinhorn/sc14cvmdect-devboard

SC14CVMDECT DEVBOARD

Size: 979 KB - Last synced at: 24 days ago - Pushed at: 24 days ago - Stars: 7 - Forks: 3

michpro/Arduino_OpenTherm_shield

Arduino hardware shield to send and receive data from Opentherm devices

Size: 2.75 MB - Last synced at: 19 days ago - Pushed at: 27 days ago - Stars: 0 - Forks: 0

makerdiary/nrf52840-m2-devkit

An open-source developer kit based on a removable nRF52840 M.2 module, designed for IoT prototyping

Language: C - Size: 38.8 MB - Last synced at: 9 days ago - Pushed at: almost 5 years ago - Stars: 32 - Forks: 11

makersmakingchange/Enabled-Controller-Mini Fork of milador/Enabled-Controller-Mini

An open source assistive switch interface

Language: C++ - Size: 13.4 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

makersmakingchange/FreedomWing Fork of ATMakersOrg/FreedomWing

Code, hardware, and documentation necessary to make the FreedomWing Joystick Adapter, a way to connect a powerchair joystick for adapted-gaming

Language: Python - Size: 209 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 1 - Forks: 1

makersmakingchange/Open-Playback-Recorder

An open source assistive technology able to playback a set of pre-recorded messages and/or sounds when activated by an assistive switch.

Language: C++ - Size: 601 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 4 - Forks: 0

makersmakingchange/LipSync-Gaming

A mouth operated gaming joystick based on the LipSync.

Language: C++ - Size: 52 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 4 - Forks: 0

makersmakingchange/LipSync-Wireless

Language: C++ - Size: 64.3 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 1 - Forks: 1

makersmakingchange/Open-Rocker-Switch

An open source assistive switch activated by pressing down on either side or rocking the top relative to the base.

Size: 209 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 1

makersmakingchange/Spruce-Mini-Joystick

A small proportional analog joystick in a mountable enclosure that can be used for adapted gaming or computer access.

Size: 47.1 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 1 - Forks: 1

makersmakingchange/Aspen-Sliding-Joystick

A small proportional sliding joystick that can be used for computer access or gaming. This joystick has an analog output and a small range of motion.

Size: 186 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

makersmakingchange/Resistive-Touch-Switch

An open source assistive switch activated by minimal force skin contact.

Size: 19.9 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 1 - Forks: 0

tuliofalmeida/pyjama

PyJama is a friendly python library for analyzing human kinematics data. Aimed at analyzing data from IMU's, MIMU's, data from optical devices and in the future tracking data from deeplearning models.

Language: Jupyter Notebook - Size: 37.5 MB - Last synced at: 29 days ago - Pushed at: about 3 years ago - Stars: 19 - Forks: 1

OpenGammaProject/Open-Gamma-Detector

☢️👁️ Hardware for a hackable DIY gamma-ray spectrometer using a popular NaI(Tl) scintillator, SiPM and a Raspberry Pi Pico.

Language: C++ - Size: 64.4 MB - Last synced at: 25 days ago - Pushed at: about 1 month ago - Stars: 293 - Forks: 37

wlmeng11/rtl-ultrasound

🔊 Ultrasound imaging with RTL-SDR

Language: Jupyter Notebook - Size: 25 MB - Last synced at: 3 days ago - Pushed at: over 5 years ago - Stars: 80 - Forks: 15

michpro/Arduino_Pro_Mini_XL

ATmega1284P uC module in Arduino Pro Mini format

Size: 1.28 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

michpro/Arduino_Pro_Mini_Dx

AVRDx uC module in Arduino Pro Mini format

Size: 1.82 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

terinjokes/dreamcast-rpt

Mean Well RPT-6003 as a universal Dreamcast PSU

Size: 142 KB - Last synced at: 5 days ago - Pushed at: about 1 year ago - Stars: 9 - Forks: 0

makerdiary/nrf52840-mdk-usb-dongle

Open-Source, Small and Low-Cost Wireless Dongle based on the nRF52840 Multiprotocol SoC, featuring Bluetooth Low Energy, Bluetooth mesh, Thread, Zigbee and 2.4 GHz, and Multi-Tool Device for IoT

Language: Python - Size: 69.1 MB - Last synced at: about 1 month ago - Pushed at: 6 months ago - Stars: 356 - Forks: 93

pinguz97/Zynq-SoM

Kicad design files for a Zynq 7020 SoM

Language: HTML - Size: 32.6 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 11 - Forks: 5

CiTOS-ULiege/Tools-for-Flow-Chemistry

Useful hardware tools for flow chemistry

Language: Python - Size: 64.5 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

sy2002/QNICE-FPGA

QNICE-FPGA is a 16-bit computer system for recreational programming built as a fully-fledged System-on-a-Chip in portable VHDL.

Language: Assembly - Size: 32 MB - Last synced at: 7 days ago - Pushed at: 7 months ago - Stars: 71 - Forks: 17

IgrikXD/WSPR-beacon

A small hardware device for transmitting WSPR messages based on the SI5351 IC which uses GPS for transmission time synchronization and automatic QTH locator calculation.

Language: C++ - Size: 18.2 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 79 - Forks: 4

eon0111/RISC-V-CPU

This is my master's degree final thesis. I'll be adding pipelining capabilities to an existing RISC-V single cycle design

Language: Scala - Size: 44.5 MB - Last synced at: 19 days ago - Pushed at: 19 days ago - Stars: 0 - Forks: 0

sensors-inl/Nervous-ECG

ECAD design files, firmware source code and standalone application for the ECG sensor of the Nervous project.

Language: C++ - Size: 8.1 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 0 - Forks: 0

openMLA/Medjed

Maskless photolithography system targeting 5um resolution. Open hardware design.

Language: Python - Size: 561 KB - Last synced at: about 2 months ago - Pushed at: about 1 year ago - Stars: 20 - Forks: 2

Mattias-Software/OSI

Open Schematic Initiative

Size: 5.55 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 2 - Forks: 0

lab11/signpost

Exploring what happens when you put computers on sign posts.

Language: CSS - Size: 795 MB - Last synced at: about 11 hours ago - Pushed at: about 7 years ago - Stars: 91 - Forks: 7

SasaKaranovic/OpenFanController

Open-source open-hardware PC fan controller for everyone!

Language: CSS - Size: 22.3 MB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 158 - Forks: 16

Open-Things-Network/lora-dev-board

Uniwersalna platforma sprzętowa na warsztaty i do prototypowania

Language: C++ - Size: 54.1 MB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 6 - Forks: 0

Pakequis/Bad-Thing-of-the-Edge-keyboard

Mechanical keyboard for left hand with Raspberry Pi Pico for games.

Language: C++ - Size: 3.73 MB - Last synced at: about 1 month ago - Pushed at: 4 months ago - Stars: 36 - Forks: 4

OpenDosimeter/OpenDosimeter

Open-source project for a low-cost battery-powered personal X-ray dosimeter! Using a custom PCB powered by a Raspberry Pico with an X-ray sensor (LYSO crystal + SiPM assembly)

Size: 25 MB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 27 - Forks: 6

Alex-C-EE/DCServo-AE

A platform designed to convert any brushed DC Motor to a smart continous servo

Language: C - Size: 114 MB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 8 - Forks: 2

SukkoPera/OpenC16RamExpansion

Open Hardware 64 Kb RAM Expansion for the Commodore 16

Size: 2.87 MB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 15 - Forks: 4

Spooky-Manufacturing/QEDA

Quantum Electronics Design Automation - The RTL of Quantum Computing

Language: Java - Size: 892 KB - Last synced at: 30 days ago - Pushed at: over 3 years ago - Stars: 25 - Forks: 6

sini6a/stm32-pocket-console

STM32 Pocket Game/Dev Console 🕹️ is a handheld device powered by 2xAAA batteries. It features 5 programmable buttons, 2 LEDs, and an SPI TFT 2.4" display with a resolution of 320x240 pixels.

Language: C - Size: 24.6 MB - Last synced at: 5 days ago - Pushed at: about 1 year ago - Stars: 11 - Forks: 0

gabrielBitts/component-video-switcher

A simple and assertive solution to component video switching!

Size: 116 MB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0

k0swe/mountaineer

Open hardware project for an integrated amateur radio interface device

Size: 30.1 MB - Last synced at: about 2 months ago - Pushed at: over 1 year ago - Stars: 16 - Forks: 0

galopago/din-rail-circuits

Collection of electronic circuits for DIN RAIL mount

Size: 17.3 MB - Last synced at: 2 months ago - Pushed at: 3 months ago - Stars: 5 - Forks: 2

charlescao460/SerialKM-Hardware

Altium Designer Hardware Design Files for Serial Keyboard Mouse

Size: 4.25 MB - Last synced at: 7 days ago - Pushed at: about 1 year ago - Stars: 1 - Forks: 0

vd-rd/sbc_allwinner_a13

Open hardware compute module with Allwinner A13 (ARM-A8 @1GHz), DDR3 (max 512MB) and expansions (USB, GPIO, WiFi, LCD, Audio)

Size: 32.6 MB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 23 - Forks: 7

tctlrd/awesome-physical-access-control

Documenting open source systems for physical access control of buildings. Add anything we are missing with a PR. Use discussions here to develop and improve the scene of FOSS / Open Hardware for physical access control.

Size: 6.84 KB - Last synced at: 9 days ago - Pushed at: 4 months ago - Stars: 1 - Forks: 0

little-red-rover/lrr-hardware

Hardware design files for Little Red Rover.

Size: 44.6 MB - Last synced at: about 2 months ago - Pushed at: 8 months ago - Stars: 1 - Forks: 0

openMLA/medjed-assembly

The design files and assembly instructions for the Medjed Photolithography system

Size: 1.2 MB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 0 - Forks: 0

vd-rd/sbc_allwinner_v3s

Open SBC module based on Allwinner V3s processor

Size: 35.1 MB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 13 - Forks: 5

galopago/panel-mount-drill-layouts

Different "drilling helpers" for mounting diverse panel devices. Those templates can be produced in different media: paper or PCB.

Size: 76.1 MB - Last synced at: 2 months ago - Pushed at: about 2 years ago - Stars: 3 - Forks: 1

galopago/misistemote

Misistemote is an Open Source, modular ecosystem that uses pre-made PCB to mix and match your choice of processor board. Is oriented to make small, mobile, battery powered electronic projects work in real conditions in a very short time.

Size: 190 MB - Last synced at: about 1 month ago - Pushed at: about 2 years ago - Stars: 11 - Forks: 2

tillitis/tkey-ssh-agent

SSH Agent for TKey, the flexible open hardware/software USB security key 🔑

Language: Go - Size: 691 KB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 136 - Forks: 15

nthnn/n2cmu

Feedforward Neural Network Coprocessing Microcontroller Unit (CPC via UART) for STM32F103C8T6 Bluepill Development Board written purely in TinyGo.

Language: Go - Size: 401 KB - Last synced at: 2 months ago - Pushed at: about 1 year ago - Stars: 3 - Forks: 0

oahr/oahr

Open Amiga Hardware Repository

Language: CSS - Size: 3.06 MB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 15 - Forks: 0

wenzel-lab/light-sheet-microscope

Appropriate technology open source light sheet microscope design based on OpenUC2, for 3d-imaging and high throughput droplet cytometry

Language: JavaScript - Size: 128 MB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 1 - Forks: 1

aeonSolutions/Open-Scientific-Research

This is the main repository for all my Open Science Research Projects

Size: 4.73 MB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 5 - Forks: 0

ajayarunachalam/Multi-Spectral-Imaging-RaspberryPi-Design

Low-Cost, Portable, and Plug-and-Play Multi-Spectral Prototype Design

Size: 8.15 MB - Last synced at: 3 months ago - Pushed at: about 4 years ago - Stars: 3 - Forks: 1

mcejp/Ocarina

Open Hardware USB-CAN interface

Language: C++ - Size: 3.27 MB - Last synced at: 3 days ago - Pushed at: about 4 years ago - Stars: 7 - Forks: 0

ffenix113/board_53

nRF5340-based board. Arduino Nano sized.

Size: 1.11 MB - Last synced at: 3 months ago - Pushed at: 5 months ago - Stars: 1 - Forks: 0

Pakequis/Chaos_papagali

A annoying device that imitates the vibration of a phone

Language: C++ - Size: 2.23 MB - Last synced at: about 1 month ago - Pushed at: 5 months ago - Stars: 2 - Forks: 1

molly/SOFT-HRUF

SOFT/HRUF free and open source steno hardware

Size: 503 KB - Last synced at: about 2 months ago - Pushed at: almost 7 years ago - Stars: 38 - Forks: 4

introlab/OpenIMU-MiniLogger

OpenIMU - Open Hardware Mini Logger based on ESP32

Language: C++ - Size: 68.7 MB - Last synced at: 13 days ago - Pushed at: over 2 years ago - Stars: 42 - Forks: 14

SukkoPera/OpenVideoModulator

Open Hardware RGB to Composite/S-Video Converter

Size: 2.59 MB - Last synced at: 15 days ago - Pushed at: about 4 years ago - Stars: 41 - Forks: 4

CMB27/ModbusRTU-Test-Shield

A shield for Arduino boards that provides an RS-485 transceiver, RS-232 transceiver, and a selection of buttons, lights, and knobs.

Language: HTML - Size: 13.1 MB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 1 - Forks: 0

unl-rocketry/flight-computer

An experimental flight controller board family developed by UNL Aerospace Rocketry

Size: 1.05 MB - Last synced at: 6 months ago - Pushed at: 6 months ago - Stars: 0 - Forks: 0

TimRudy/ice-chips-verilog

IceChips is a library of all common discrete logic devices in Verilog

Language: Verilog - Size: 1.42 MB - Last synced at: 6 months ago - Pushed at: 6 months ago - Stars: 135 - Forks: 23

rrainey/dropkick

A data logger designed for skydivers

Language: Prolog - Size: 107 MB - Last synced at: 6 months ago - Pushed at: 6 months ago - Stars: 4 - Forks: 0

Karpova-Lab/syringe-pump

Syringe pump with ± 5 μm linear precision (which translates to ±3µL if using 60mL syringe)

Language: C - Size: 228 MB - Last synced at: 6 months ago - Pushed at: 6 months ago - Stars: 19 - Forks: 2

NemoAndrea/freezer-display

Open hardware freezer display primarily intended for freezers used in research labs for biosample storage.

Language: Python - Size: 17.7 MB - Last synced at: about 1 month ago - Pushed at: 6 months ago - Stars: 0 - Forks: 0

little-red-rover/lrr-docs

Documentation for Little Red Rover, a novel educational robotics platform.

Language: HTML - Size: 31.5 MB - Last synced at: about 2 months ago - Pushed at: 6 months ago - Stars: 1 - Forks: 0

CarlosCraveiro/einstein-boltzmann

Remake of the board of the 5-th EPO (2017), using KiCAD 7.0, to measure the Boltzmann constant through the analysis of the thermal noise of a resistor.

Language: Nix - Size: 21 MB - Last synced at: about 1 month ago - Pushed at: 9 months ago - Stars: 1 - Forks: 0

jhbruhn/ambika-smr4-multimode

Multimode voicecard for the Ambika synthesizer. Based on the SMR-4 and 4 Pole Mission, adds LP, BP, HP and Notch filter types.

Size: 8.56 MB - Last synced at: 2 months ago - Pushed at: about 4 years ago - Stars: 9 - Forks: 4

SukkoPera/OpenFlops

Open-Hardware Floppy Drive Simulator

Size: 12.7 MB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 276 - Forks: 42

ssloy/penny

3 servos, 10 dollars hexapod

Language: HTML - Size: 19.4 MB - Last synced at: 14 days ago - Pushed at: about 5 years ago - Stars: 32 - Forks: 6

vgeorge/coldsnap

Air conditioner temperature override controller based on Arduino (discontinued)

Language: C++ - Size: 854 KB - Last synced at: about 1 month ago - Pushed at: over 6 years ago - Stars: 11 - Forks: 4