GitHub topics: blynk-library

Repositories

istiak8empire/IoT-Based-Electricity-Energy-Meter

The IoT-based Electricity Energy Meter is designed to address the need for accurate and convenient monitoring of electricity consumption. By incorporating IoT technology, this project offers an innovative solution that enables users to monitor their energy consumption and take proactive measures to reduce waste and optimize energy efficiency.

Language: C++ - Size: 1.69 MB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 0 - Forks: 0

itscrystalline/PCCCHON_Project_IoTDoorLock-V2 📦

โครงงานกลอนประตูเทคโนโลยี IoT แต่เปลี่ยนจากการตรวจจับใบหน้าเป็นการแสกน RFID

Language: C++ - Size: 65.4 KB - Last synced at: 10 months ago - Pushed at: almost 3 years ago - Stars: 0 - Forks: 0

yoshi151/NodeMCU-Control-Fan-With-Relay

This is an IOT project you can control any electronics by plug them in a smart plug which we gonna make. you can control to make something on while your outside like turn an fan on before you come home.

Language: C++ - Size: 659 KB - Last synced at: over 1 year ago - Pushed at: over 4 years ago - Stars: 1 - Forks: 0

zaheenadeep/dMali

A smartphone-controlled automated gardening system built using Arduino and Blynk.

Language: HTML - Size: 2.75 MB - Last synced at: 7 days ago - Pushed at: about 2 years ago - Stars: 1 - Forks: 0

regi18/Espegi

Espegi is an alternative firmware for ESP8266 based devices like iTead Sonoff with web UI, OTA updates, and Blynk support.

Language: C++ - Size: 52.7 KB - Last synced at: about 2 years ago - Pushed at: almost 5 years ago - Stars: 7 - Forks: 0

khoih-prog/Blynk_Async_WM 📦

Simple WiFiManager for Blynk and ESP8266/ESP32 (including ESP32-S2, ESP32-C3) with or without SSL, configuration data saved in either LittleFS, SPIFFS or EEPROM. This library, using AsyncWebServer instead of (ESP8266)WebServer, for configuring/auto(re)connecting ESP8266/ESP32 modules to best or available MultiWiFi APs and MultiBlynk servers at runtime. Enable adding dynamic custom parameters from sketch and input using the same Config Portal. Config Portal will be auto-adjusted to match the number of dynamic parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Static STA IP and DHCP Hostname as well as Config Portal AP channel, IP, SSID, Password can be configured. Multi or Double DetectDetector feature permits entering Config Portal as requested.

Language: C++ - Size: 1.2 MB - Last synced at: over 2 years ago - Pushed at: over 3 years ago - Stars: 19 - Forks: 6

regi18/Sonoff-Blynk 📦

Connect the sonoff to the internet using the blynk app, you can also use a physical wall switch or add a DHT22 sensor

Language: C++ - Size: 23.4 KB - Last synced at: about 2 years ago - Pushed at: almost 6 years ago - Stars: 7 - Forks: 4

RAvengineer/SpO2-Pulse-Monitoring-System 📦

IoT-based Pulse and Blood-oxygen Monitoring System, which will allow doctors to monitor the Pulse and Blood-oxygen level of quarantined/remote patients through the Blynk IoT App.

Language: C++ - Size: 3.99 MB - Last synced at: over 2 years ago - Pushed at: about 4 years ago - Stars: 1 - Forks: 1

khoih-prog/Blynk_Async_ESP32_BT_WF 📦

Simple WiFiManager for Blynk and ESP32 with or without SSL, configuration data saved in either SPIFFS or EEPROM. Enable inclusion of both ESP32 Blynk BT/BLE and WiFi libraries. Then select one at reboot or run both. Eliminate hardcoding your Wifi and Blynk credentials and configuration data saved in either SPIFFS or EEPROM. Using AsyncWebServer instead of (ESP8266)WebServer.

Language: C++ - Size: 776 KB - Last synced at: over 2 years ago - Pushed at: over 3 years ago - Stars: 8 - Forks: 2

khoih-prog/BlynkESP32_BT_WF 📦

Enable inclusion of both ESP32 Blynk BT / BLE and WiFi libraries. Then run both WiFi and BT/BLE simultaneously, or select one to use at runtime after reboot. Eliminate hardcoding your Wifi and Blynk credentials and configuration data saved in either SPIFFS or EEPROM.

Language: C++ - Size: 929 KB - Last synced at: over 2 years ago - Pushed at: over 3 years ago - Stars: 11 - Forks: 4

khoih-prog/BlynkGSM_Manager 📦

Simple GSM shield Manager for Blynk and ESP32 / ESP8266 boards, with or without SSL, configuration data saved in SPIFFS / EEPROM. This library enables user to include both Blynk GSM/GPRS and WiFi libraries in one sketch, run both WiFi and GSM/GPRS simultaneously, or select one to use at runtime after reboot.

Language: C++ - Size: 772 KB - Last synced at: over 2 years ago - Pushed at: over 3 years ago - Stars: 20 - Forks: 2

khoih-prog/Blynk_Teensy 📦

Enable Blynk support of Teensy boards, especially latest Teensy 4.0, using WiFi, Ethernet, BT/BLE and GSM/GPRS shield

Language: C++ - Size: 85 KB - Last synced at: over 2 years ago - Pushed at: over 3 years ago - Stars: 2 - Forks: 1

khoih-prog/BlynkEthernet_WM 📦

This is the library, designed to help you eliminate hardcoding your Blynk credentials in Mega 1280, Mega 2560, Mega ADK, Teensy, SAM DUE, SAMD, RP2040-based, etc. boards using with Ethernet shields (W5100, W5200, W5500, ENC28J60, etc).

Language: C++ - Size: 1.69 MB - Last synced at: over 2 years ago - Pushed at: over 3 years ago - Stars: 1 - Forks: 0