GitHub topics: thingspeak

harika0279/Sure-Trust-Final-Project

A wireless sensor system using STM32 and ESP32 to monitor environmental data via ThingSpeak.

Size: 1.01 MB - Last synced at: 4 days ago - Pushed at: 5 days ago - Stars: 0 - Forks: 0

arfrei/PRACTICAS_COMUNITARIAS_SINCHAL_PAE_2025

En este repositario adjuntaré todos los códigos utilizados en el proyecto de prácticas comunitarias. Se utiliza Arduino IDE.

Language: C++ - Size: 43 KB - Last synced at: 6 days ago - Pushed at: 6 days ago - Stars: 0 - Forks: 0

JezT25/Pico_Smart_Clock

A real-time smart clock using Raspberry Pi Pico W and FreeRTOS. Streams live data to ThingSpeak.

Language: C - Size: 1.5 MB - Last synced at: 10 days ago - Pushed at: 10 days ago - Stars: 0 - Forks: 0

sparkfun/SparkFun_DataLogger

Documentation and firmware for the SparkFun DataLogger IoT line of products.

Language: HTML - Size: 49.4 MB - Last synced at: 6 days ago - Pushed at: 5 months ago - Stars: 20 - Forks: 4

nothans/thingspeak-esp-examples

ESP8266 / NodeMCU Examples for https://ThingSpeak.com

Size: 16.6 KB - Last synced at: 4 days ago - Pushed at: over 5 years ago - Stars: 81 - Forks: 77

CyberScoper/ESP8266-HTU21D-Weather-Station

🌡️💧 An autonomous, solar-powered weather station built with ESP8266 (ESP-12E). It measures temperature, humidity, illuminance, dew point, and heat index using HTU21D & TSL2561 sensors, and sends data to ThingSpeak every 15 minutes. Includes Deep Sleep for energy efficiency and a 3D-printed enclosure for outdoor use.

Language: C++ - Size: 59.6 KB - Last synced at: 17 days ago - Pushed at: 26 days ago - Stars: 2 - Forks: 0

CyberScoper/ESP32-AirQuality-Station-Home

☀️Smart environmental monitor with ESP32: measuring temperature, humidity and CO2 levels with OLED display and control via Telegram.

Language: C++ - Size: 44.9 KB - Last synced at: 17 days ago - Pushed at: 26 days ago - Stars: 1 - Forks: 0

CyberScoper/ESP32-AirQuality-Station

☀️Smart environmental monitor with ESP32: measuring temperature, humidity and pollution levels with OLED display and control via Telegram.

Language: C++ - Size: 65.4 KB - Last synced at: 17 days ago - Pushed at: 26 days ago - Stars: 3 - Forks: 0

happybono/FinedustMonitorWithGPS

Fine dust (air pollution) monitoring station. Air pollution monitoring channel updates once every minute with PM10.0 and PM2.5 readings from the Nova PM (SDS011) Sensor. Also includes real time location tracking capabilities using the GY-NEO6MV2 GPS Sensor.

Language: C++ - Size: 21.9 MB - Last synced at: 18 days ago - Pushed at: 25 days ago - Stars: 5 - Forks: 3

mhamidjamil/TTGO_TCall

This project uses TTGO T-Call module to deal with calls and messages, monitor its surroundings and alert user via call or message if any environmental changes detected by ultrasound sensor.

Language: C++ - Size: 683 KB - Last synced at: 19 days ago - Pushed at: about 1 month ago - Stars: 6 - Forks: 2

Sandeepkumar-S-18/Smart_wireless_water_meter_with_Web_DB

Language: C++ - Size: 27.6 MB - Last synced at: 21 days ago - Pushed at: about 2 months ago - Stars: 0 - Forks: 3

akhdanfarrosrenoldi/web-realtime-aquarium-automation

Aquarium automation covers various aspects, and its implementation can provide many benefits to aquarium owners. Some of the main reasons for automating aquariums involve maintaining a stable environment, time savings, and improved fish health. stable environment, time savings, and improved fish health.

Language: HTML - Size: 20.6 MB - Last synced at: about 1 month ago - Pushed at: about 1 month ago - Stars: 0 - Forks: 0

Sandeepkumar-S-18/Air-pollution-monitoring-system

This is a mini-project on an air pollution monitoring system using an ESP32 WiFi module, designed to connect to ThingSpeak.

Language: C++ - Size: 2.32 MB - Last synced at: about 1 month ago - Pushed at: about 2 months ago - Stars: 0 - Forks: 0

petous22/Pool-solar-heater-control-and-weather-station

Arduino Uno WiFi REV2 temperature of pool and solar panel control + weather in Osek u Duchcova, Czech Republic, MAX 6675 thermocouple and BME280

Language: C++ - Size: 30.3 KB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 1 - Forks: 0

Lucas-PCN/smart_lighting

Este projeto implementa um sistema de automação residencial para controle de iluminação utilizando a placa BitDogLab com Raspberry Pi Pico W. A comunicação via Wi-Fi permite o envio de dados para o ThingSpeak, possibilitando o monitoramento remoto do acionamento das luzes.

Language: C - Size: 17.6 KB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 0 - Forks: 0

AvastrOficial/ThingSpeak-Recopilador-De-Humedad

Este proyecto utiliza un ESP32 para leer datos de temperatura, humedad y presión de los sensores DHT22 y BMP280. Los datos se envían a la plataforma en la nube ThingSpeak, y un buzzer se activa si se detectan condiciones de alerta (temperatura o humedad excesivas).

Language: C - Size: 7.81 KB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

mu373/atom-s3-co2

CO2 monitor integration for M5Stack AtomS3. Reads sensor values from UD-CO2S, and sends values to ThingsSpeak IoT platform.

Language: C++ - Size: 22.5 KB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

DLSNemsara/IOT-Project-Group-J Fork of thejanRajapaksha/IOT-Project-Group-J

IoT-based system for real-time driver drowsiness detection using ESP32 and cloud services for monitoring and alerts.

Language: C - Size: 67.6 MB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 1 - Forks: 0

nithya333/Mini-IoT-projects

Language: C++ - Size: 92.3 MB - Last synced at: 12 days ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

tangowhisky37/LetsHack

Notes & HowTo's covering the Raspberry Pi, Arduino, ESP8266, ESP32, etc.

Language: HTML - Size: 2.61 MB - Last synced at: 14 days ago - Pushed at: over 3 years ago - Stars: 52 - Forks: 11

yagmurbarank/rain-sensor-with-arduino

This repository contains Arduino code for the usage of a rain sensor and nRF24L01 communication module.

Language: C++ - Size: 1.54 MB - Last synced at: 16 days ago - Pushed at: over 1 year ago - Stars: 5 - Forks: 0

rprakashdass/power_consumption_analytics

Power Consumption Analytics is an IoT-based energy management system leveraging ThingSpeak and Flutter to monitor, analyze, and optimize power usage in real-time. It provides anomaly detection, dynamic dashboards, and actionable insights for energy efficiency.

Language: Dart - Size: 414 KB - Last synced at: about 1 month ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0

ImenHamdii/health_monitor

Notre projet développe un système IoT intégrant les capteurs DHT11 (température/humidité) et MAX30102 (fréquence cardiaque/SpO2), avec transmission des données via MQTT à ThingSpeak. L'objectif est de surveiller les conditions environnementales et biométriques en temps réel, utile pour la santé à domicile et les environnements intelligents.

Language: C++ - Size: 17.7 MB - Last synced at: about 1 month ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0

Lane-Romuald/IoT-irrigation-data-collection-system

An IoT-based data collection system using the ESP32 microcontroller programmed with Arduino to monitor environmental conditions for smart irrigation. The system measures soil moisture, temperature, air temperature, humidity, and rain probability. Data is stored locally on an SD card and uploaded to the ThingSpeak platform.

Language: C++ - Size: 22.5 KB - Last synced at: about 2 months ago - Pushed at: 3 months ago - Stars: 1 - Forks: 0

chrisb2/battery-monitor

Particle Photon based 12v car battery monitor. Useful for alerting you that the battery is becoming discharged.

Language: Arduino - Size: 560 KB - Last synced at: 17 days ago - Pushed at: over 8 years ago - Stars: 20 - Forks: 3

andrejicd/Thingspeak-Weather-Station

ThingSpeak Weather Station with LCD Display

Language: C++ - Size: 31.3 KB - Last synced at: about 2 months ago - Pushed at: 4 months ago - Stars: 2 - Forks: 0

cakraawijaya/Sistem-Pemantauan-Suhu-dan-Kelembaban-Udara-Pada-Tanaman-Hias-Janda-Bolong-Terintegrasi 📦

UPN Veteran Jatim | Undergraduate Research

Language: JavaScript - Size: 31.4 MB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 1 - Forks: 1

adrianlois/RaspberryPi-Projects

Misc projects for RaspberryPi

Language: Python - Size: 755 KB - Last synced at: about 2 months ago - Pushed at: 3 months ago - Stars: 2 - Forks: 0

devicplan/bms

Battery management controller for LiFePo4 cells and balancers

Language: Python - Size: 8.09 MB - Last synced at: about 1 month ago - Pushed at: 3 months ago - Stars: 0 - Forks: 1

nehalmr/HealthPod

HealthPod by nehalmr (IoT Healthcare Module): ESP8266, DS18B20, Pulse Sensor, C++, Thingspeak, Flutter UI Developed a healthcare monitoring system with IoT integration

Language: Dart - Size: 26.4 MB - Last synced at: 16 days ago - Pushed at: 9 months ago - Stars: 1 - Forks: 0

Andy4495/Wireless-Sensor-Receiver-Hub

MSP430-based receiver hub using CC110L wireless modules.

Language: C++ - Size: 1.01 MB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 0 - Forks: 1

julianebueno/ATP_IoT

Microprocessador ESP32 - Registro de temperatura e envio de dados para internet

Language: Python - Size: 3.91 KB - Last synced at: about 1 month ago - Pushed at: over 1 year ago - Stars: 1 - Forks: 0

d-nadella/Smart_Health_Monitoring

This system monitors heart rate and temperature of patients using wearable sensors, sending alerts to guardians and doctors in case of abnormalities, ensuring timely intervention

Size: 1.25 MB - Last synced at: 18 days ago - Pushed at: 4 months ago - Stars: 0 - Forks: 0

d-nadella/Smart_Home_Automation

Smart Home Automation uses IoT technology to control and monitor household devices remotely. It enables automation of lighting, temperature, security systems, and appliances through smartphones, enhancing convenience, energy efficiency, and security.

Language: C++ - Size: 3.96 MB - Last synced at: 18 days ago - Pushed at: 4 months ago - Stars: 0 - Forks: 0

d-nadella/Smart_Irrigation_System

The Smart Irrigation System leverages IoT to monitor soil moisture and temperature, automating irrigation based on real-time data, ensuring efficient water usage in agriculture

Language: C++ - Size: 3.25 MB - Last synced at: 18 days ago - Pushed at: 4 months ago - Stars: 0 - Forks: 0

Zenomodiff/Weather-Station-With-Arduino-Python-Nodemcu

This Weather Station Uses Arduino , Nodemcu Along With Different Analog Value Sensor & Digital Value Sensors . Since Nodemcu Have Only One A0 Pin We Use Json Library To Sent Values From Sensor's As "DOC" & Print It In Serial Monitor

Language: C++ - Size: 125 MB - Last synced at: 4 months ago - Pushed at: 4 months ago - Stars: 2 - Forks: 4

arutz12/Raspberry-Weather-EPD

Displaying weather info (ESP8266 sensor data and forecast) on Raspberry Pi equipped with E-paper HAT (Waveshare 2.7inch)

Language: Python - Size: 18.8 MB - Last synced at: 3 days ago - Pushed at: 4 months ago - Stars: 2 - Forks: 0

Unkn0wnN4m3/pico-project

Measure temperature, pressure and humidity of the environment with the Raspberry Pico W

Language: Python - Size: 1.61 MB - Last synced at: 26 days ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

Magxtron/Smart_Energy_Meter

⚡ The power of energy measurements in your house.

Language: C++ - Size: 12.7 KB - Last synced at: 13 days ago - Pushed at: 10 months ago - Stars: 2 - Forks: 0

tangowhisky37/RaspiPythonProjects

A collection of some of the Raspberry Pi IoT projects I have been working on

Language: Python - Size: 7.05 MB - Last synced at: 12 days ago - Pushed at: almost 7 years ago - Stars: 11 - Forks: 4

TDR-VOID/Smart-Tracking-Seal

Smart Tracking Seal, which is built using an A9G module and an ATmega328P microcontroller, enables real-time location tracking and lock state verification, with notifications via mobile app and SMS.

Language: C++ - Size: 4.96 MB - Last synced at: about 1 month ago - Pushed at: 12 months ago - Stars: 3 - Forks: 0

nothans/iot-debugger

Use this simple web-based tool to see data stored in an Internet of Things data service such as ThingSpeak

Language: HTML - Size: 108 KB - Last synced at: 1 day ago - Pushed at: 5 months ago - Stars: 23 - Forks: 22

BAkash22/Microclimate-Monitoring

Iot enabled crop suggestion by monitoring microclimatic conditions

Language: HTML - Size: 444 KB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

jim11662418/ESP8266_Posts_BMP280_Pressure_and_Temp_to_ThingSpeak

ESP8266 Reads the barometric pressure and temperature from a BMP280 module and sends data to ThingSpeak

Language: Lua - Size: 7.81 KB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 0 - Forks: 0

dngvmnh/Automatic_Weather_Station

Automatic Weather Station utilizes the ESP32 microcontroller and DFRobot Environmental Sensor to collect and transmit real-time environmental data, including temperature, humidity, and air quality metrics, to a web server for monitoring and analysis.

Language: HTML - Size: 9.03 MB - Last synced at: 13 days ago - Pushed at: 8 months ago - Stars: 2 - Forks: 1

SarthakSKumar/Robofest-2.0-Project-Submissions

Workshop Project Submissions for Robofest 2.0, IEEE RAS PESU. November 2022

Size: 706 KB - Last synced at: 5 days ago - Pushed at: over 2 years ago - Stars: 3 - Forks: 0

ryanbritodev/esp32-mahindra

Monitoramento de Temperatura e Umidade com ESP32 e IoT criado como parte da entrega da Sprint 3 para o Challenge da Tech Mahindra na FIAP, demonstrando uma aplicação de Internet das Coisas (IoT) utilizando o microcontrolador ESP32 para monitorar dados.

Language: C++ - Size: 1.69 MB - Last synced at: 15 days ago - Pushed at: 7 months ago - Stars: 1 - Forks: 1

race2infinity/Hydroponics

🌱 Automated Hydroponics (a method of growing plants without soil) using Arduino Mega.

Language: CSS - Size: 2.54 MB - Last synced at: 6 months ago - Pushed at: almost 5 years ago - Stars: 156 - Forks: 41

vsmidhun21/Floor-Cleaning-Robot

This repository is used to store and display the documents of the project "Floor Cleaning Robot With Android Based Voice Command".

Size: 29.8 MB - Last synced at: about 2 months ago - Pushed at: 10 months ago - Stars: 1 - Forks: 0

Iswarya-Singaram/Gas_Level_monitoring-ThingSpeak

This system leverages the MQ2 gas sensor and ESP8266 to monitor gas levels, with data visualization available on the ThingSpeak cloud platform.

Size: 36.1 KB - Last synced at: 13 days ago - Pushed at: 10 months ago - Stars: 0 - Forks: 0

hjpotter92/ups-monitor

UPS monitoring and data point streaming system.

Language: Go - Size: 7.77 MB - Last synced at: 9 days ago - Pushed at: 4 months ago - Stars: 2 - Forks: 0

chrisb2/temperature_logger

Logs temperature to Thingspeak

Language: Python - Size: 4.88 KB - Last synced at: about 1 month ago - Pushed at: 8 months ago - Stars: 0 - Forks: 0

valllllll2000/thingspeakchannelviewer

Language: Kotlin - Size: 765 KB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 0 - Forks: 0

msksanthosh2000/ENERGY-MONITORING-SYSTEM-USING-IoT

SMAERT ENERGY MONITORING SYSTEM USING IoT

Size: 1.88 MB - Last synced at: 8 months ago - Pushed at: about 3 years ago - Stars: 0 - Forks: 0

fandau1/Pool-Matrix-Monitor

Simple arduino pool clock with sensors

Language: C++ - Size: 64.8 MB - Last synced at: 8 months ago - Pushed at: almost 5 years ago - Stars: 4 - Forks: 1

kotyara12/reDataSend

Универсальная библиотека для отправки данных на OpenMon, NarodMon, ThingSpeak

Language: C++ - Size: 11.7 KB - Last synced at: about 2 months ago - Pushed at: 8 months ago - Stars: 1 - Forks: 1

radeklat/micropython-thingspeak

Library for sending data to thingspeak.com from IoT devices running micropython (such as ESP8266)

Language: Python - Size: 12.7 KB - Last synced at: 12 months ago - Pushed at: almost 7 years ago - Stars: 13 - Forks: 1

bedre7/smart-garage

A mobile app making use of IoT cloud platforms to enable authorized users to control their Smart garage and Delivery box remotely using their smart phone.

Language: TypeScript - Size: 5.64 MB - Last synced at: 9 months ago - Pushed at: 9 months ago - Stars: 0 - Forks: 0

CHUYRO/Meteo-PiPicoW-SDK

Atmospheric variables control based on Pi-Pico W powered by battery pack(4xAA NiMh).

Language: C++ - Size: 6.81 MB - Last synced at: 9 months ago - Pushed at: 9 months ago - Stars: 1 - Forks: 0

chetryJyoti/PetFeeder_IoT_app

Iot based PetFeeder Solution

Language: TypeScript - Size: 5.51 MB - Last synced at: about 1 month ago - Pushed at: almost 2 years ago - Stars: 2 - Forks: 0

hemanthofficial24/Asthma-Risk-Prediction

Asthma risk prediction using machine learning and iot

Language: Jupyter Notebook - Size: 44.9 KB - Last synced at: about 2 months ago - Pushed at: 9 months ago - Stars: 0 - Forks: 0

biswadeep-roy/arduino-projects

Language: Python - Size: 8.79 KB - Last synced at: about 1 month ago - Pushed at: 9 months ago - Stars: 0 - Forks: 0

ksatriow/explore-esp32

This repository provide about my project experience using Module Train ESP32

Language: C++ - Size: 13.7 MB - Last synced at: 2 months ago - Pushed at: 10 months ago - Stars: 0 - Forks: 1

tejaswari7/IOT

Air Pollution Monitoring

Language: C++ - Size: 9.77 KB - Last synced at: 10 months ago - Pushed at: over 4 years ago - Stars: 0 - Forks: 0

0xtanmoysamanta/weather-station-twitter-bot

Weather Station Model on Internet of Things using the most popular bord NodeMcu-esp8266.

Language: C++ - Size: 40 KB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 0 - Forks: 0

Levantosina/FFT-Analysis

Real-Time Voltage and Current Monitoring with FFT Analysis and ThingSpeak Integration

Language: C++ - Size: 6.84 KB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 0 - Forks: 0

disquisitioner/AQI-Monitor-SEN54

Arduino project for a PM2.5 Air Quality Index measuring and reporting monitor, using a Sensirion SEN54 sensor and Adafruit Feather.

Language: C++ - Size: 3.47 MB - Last synced at: 4 days ago - Pushed at: 29 days ago - Stars: 0 - Forks: 0

maarten-pennings/ENS210

Arduino library for the ENS210 relative humidity and temperature sensor with I2C interface from ams

Language: C++ - Size: 335 KB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 5 - Forks: 2

Ishan-Kotian/IoT-based-Patient_Health_Monitoring_System

Language: C++ - Size: 17.5 MB - Last synced at: about 2 months ago - Pushed at: over 4 years ago - Stars: 2 - Forks: 0

paultheman/BME280_webserver

BME280 webserver using Arduino Mega, Ethernet shield and 0.96 OLED screen

Language: HTML - Size: 27.3 KB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 3 - Forks: 1

eshansurendra/Automatic-Retractable-Clothesline-System

Automate and enhance your clothesline experience with this Arduino-based system. It automates the retraction process triggered by rain detection, protecting clothes during inclement weather. The system offers remote data monitoring via Thingspeak and convenient control through a mobile app.

Language: C++ - Size: 7.59 MB - Last synced at: 12 days ago - Pushed at: 10 months ago - Stars: 2 - Forks: 3

majabirmancevic/air-safety-system

IoT-based system for real-time monitoring of temperature, air humidity, and pressure with the support of smoke detection

Language: C++ - Size: 16.3 MB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 0 - Forks: 0

iotool/meshtastic

My contribution to the LoRa Meshtastic network (thingspeak monitoring)

Language: Python - Size: 1.23 MB - Last synced at: 11 months ago - Pushed at: 11 months ago - Stars: 0 - Forks: 0

anasjawed283/RadarCloudSync

A acoustic radar system that seamlessly transmits data to ThingsPeak Cloud and supports real-time data fetching on ROS Ubuntu for instant analysis and monitoring.

Language: C++ - Size: 98.6 KB - Last synced at: 11 months ago - Pushed at: 11 months ago - Stars: 0 - Forks: 0

albertus82/raspberrypi-cpu-logger

Send Raspberry Pi CPU frequency and temperature to ThingSpeak.

Language: Java - Size: 188 KB - Last synced at: 11 months ago - Pushed at: 11 months ago - Stars: 0 - Forks: 0

abphilip-vit/College_Written

College - Handwritten Codes

Size: 66.1 MB - Last synced at: 11 months ago - Pushed at: over 3 years ago - Stars: 0 - Forks: 0

MarkoDojkic/IoT-Ispitni-Projekat

Final project for the subject Internet of Things

Language: Python - Size: 1.28 MB - Last synced at: 11 months ago - Pushed at: 11 months ago - Stars: 0 - Forks: 0

avaldebe/AQmon

DIY Air Quality Monitor

Language: Lua - Size: 10.8 MB - Last synced at: 10 months ago - Pushed at: about 5 years ago - Stars: 47 - Forks: 13

datduyng/particle-iot-weather-station

Language: Jupyter Notebook - Size: 398 KB - Last synced at: 11 months ago - Pushed at: about 6 years ago - Stars: 0 - Forks: 0

mykesoft/My-IoT-Home-V2.0

My IoT Home V2.0 is a highly customizable computer system, which through a Mobile App enables the user to have real-time control of his home.

Language: Dart - Size: 10.4 MB - Last synced at: about 2 months ago - Pushed at: almost 3 years ago - Stars: 1 - Forks: 0

Hguimaraes/el-reader

[UFRJ - EEL770] Using NodeMCU to monitor Lab Freezers. Operating Systems course at @ UFRJ

Language: C++ - Size: 47.9 KB - Last synced at: 11 months ago - Pushed at: almost 8 years ago - Stars: 0 - Forks: 0

likhithkanigolla/Data-Exchanger-OM2M-ThingSpeak

Non Ending Script for exchange of data between OM2M and ThingSpeak

Language: Python - Size: 11.7 KB - Last synced at: 12 months ago - Pushed at: about 2 years ago - Stars: 0 - Forks: 0

folkn/weather

Weather Station Sensor project using Arduino, ThingSpeak

Language: C++ - Size: 114 KB - Last synced at: 12 months ago - Pushed at: over 6 years ago - Stars: 0 - Forks: 0

ProfessorKazarinoff/MATLAB-Arduino-ESP8266-IoT

A student project for ENGR114 at Portland Community College. Uses MATLAB connected to an Arudino over serial to control an ESP8266 over serial that can connect over WiFi to an IoT server

Language: Python - Size: 3.07 MB - Last synced at: 12 months ago - Pushed at: over 6 years ago - Stars: 1 - Forks: 0

Ananya0909/Smart-Icebox-for-Intelligent-Inventory-Control

Design Smart Home Appliances using IoT and ML

Language: C++ - Size: 6.84 KB - Last synced at: 12 months ago - Pushed at: 12 months ago - Stars: 0 - Forks: 0

GWigWam/ESP8266-IoT

ESP8266 random tinkering repo

Language: C++ - Size: 26.2 MB - Last synced at: 12 months ago - Pushed at: 12 months ago - Stars: 0 - Forks: 0

L1ZLe/Shelly-Thingspeak-Bridge

This JavaScript code establishes a connection between two MQTT brokers, one hosted by ThingSpeak and another by Shelly Plug S Plug S. It subscribes to specific topics on the Shelly Plug S broker to receive power and temperature data, then upon receiving both values, it publishes the data to the ThingSpeak broker for further processing.

Language: JavaScript - Size: 12.7 KB - Last synced at: about 2 months ago - Pushed at: about 1 year ago - Stars: 2 - Forks: 0