GitHub topics: sam-due
khoih-prog/ESP_AT_Lib 📦
WizFi360/ESP8266/ESP32 wrapper library for Arduino providing an easy-to-use way to manipulate ESP8266/ESP32-AT shields.
Language: C++ - Size: 3.59 MB - Last synced at: about 2 years ago - Pushed at: about 2 years ago - Stars: 15 - Forks: 5
khoih-prog/NTPClient_Generic 📦
Library for NTPClient to connect to an NTP time-server. Get time from a NTP time-server and keep it in sync. For ESP8266/ESP32, nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, etc. besides AVR, using ESP WiFi, WiFiNINA, Ethernet W5x00, ENC28J60, LAN8742A, ESP8266/ESP32 AT-command WiFi.
Language: C++ - Size: 679 KB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 19 - Forks: 8
khoih-prog/WiFiWebServer 📦
This is simple yet complete WebServer library for AVR, Portenta_H7, Teensy, SAM DUE, SAMD, STM32, RP2040-based, etc. boards running WiFi modules/shields (WiFiNINA, CYW43439, U-Blox W101, W102, etc.). The functions are similar and compatible to ESP8266/ESP32 WebServer libraries to make life much easier to port sketches from ESP8266/ESP32. Now using WiFiMulti_Generic library
Language: C++ - Size: 1.65 MB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 87 - Forks: 14
khoih-prog/Ethernet_Generic 📦
Simple Ethernet library for AVR, AVR Dx, Portenta_H7, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52 and RASPBERRY_PI_PICO boards using Ethernet shields W5100, W5200, W5500, W5100S, W6100. With this library you can use the Arduino Ethernet (shield or board) to connect to Internet to provides both Client and server functionalities.
Language: C++ - Size: 1.98 MB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 30 - Forks: 11
khoih-prog/WiFiNINA_Generic 📦
Enables WiFiNINA network connection (local and Internet) for SAM DUE, SAMD21, SAMD51, Teensy, AVR Mega, STM32, RP2040-based boards, etc. in addition to Arduino MKR WiFi 1010, Arduino MKR VIDOR 4000, Arduino UNO WiFi Rev.2 , Nano 33 IoT, Nano_RP2040_Connect. Now with fix of severe limitation to permit sending much larger data than total 4K
Language: C++ - Size: 2.55 MB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 32 - Forks: 11
khoih-prog/Timezone_Generic 📦
Library to facilitate time zone conversions and automatic daylight saving (summer) time adjustments. For ESP8266, ESP32, WT32-ETH01 (ESP32 + LAN8720), SAMD21, SAMD51, nRF52, STM32F/L/H/G/WB/MP1, Teensy, SAM DUE, RTL8720DN, RP2040-based (Nano_RP2040_Connect, RASPBERRY_PI_PICO), Portenta_H7 (Ethernet or WiFi) boards, etc. using W5x00/ENC28J60/LAN8742A Ethernet, ESP or ESP-AT WiFi or WiFiNINA. Ethernet_Generic library is used as default for W5x00.
Language: C++ - Size: 966 KB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 12 - Forks: 3
khoih-prog/MultiResetDetector_Generic 📦
Library to detect a multi reset, using EEPROM, DueFlashStorage, FlashStorage_SAMD, FlashStorage_STM32 or LittleFS/InternalFS. For AVR, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano_RP2040_Connect, RASPBERRY_PI_PICO), Portenta_H7, etc. boards. Now using efficient FlashStorage_STM32 library and supporting new STM32 core v2.0.0 as well as v1.9.0
Language: C++ - Size: 341 KB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 3 - Forks: 0
khoih-prog/DoubleResetDetector_Generic 📦
Library to detect a double reset, using EEPROM, DueFlashStorage, FlashStorage_SAMD, FlashStorage_STM32 or LittleFS/InternalFS for AVR, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano_RP2040_Connect, RASPBERRY_PI_PICO), Portenta_H7, etc. boards. Now using efficient FlashStorage_STM32 library and supporting new STM32 core v2.0.0 as well as v1.9.0
Language: C++ - Size: 407 KB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 2 - Forks: 1
khoih-prog/WiFiMulti_Generic 📦
Simple MultiWiFi library to adapt ESP32/ESP8266 MultiWiFi of WiFi libraries to all other WiFi modules and libraries. Currently supporting ESP32, ESP8266, Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano-RP2040-Connect, RASPBERRY_PI_PICO, RASPBERRY_PI_PICO_W, etc.) boards using WiFi, such as WiFiNINA, WiFi101, CYW43439, U-Blox W101, W102, ESP8266/ESP32-AT modules/shields, with functions similar to those of ESP8266/ESP32 MultiWiFi of WiFi libraries
Language: C++ - Size: 330 KB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 8 - Forks: 2
khoih-prog/SAMDUE_PWM 📦
This library, a wrapper around SAM DUE analogWrite() function, enables you to use Hardware-based PWM channels on SAM_DUE boards to create and output PWM to pins. Using similar functions as some other FastPWM libraries, it enables you to port PWM code easily between platforms
Language: C++ - Size: 56.6 KB - Last synced at: about 2 years ago - Pushed at: about 2 years ago - Stars: 0 - Forks: 0
khoih-prog/SAMDUE_Slow_PWM 📦
This library enables you to use ISR-based PWM channels on an Arduino SAM_DUE board to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is they're ISR-based PWM channels, supporting lower PWM frequencies with suitable accuracy. Their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These ISR-based PWMs, still work even if other software functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software-based PWM using millis() or micros(). That's necessary if you need to control devices requiring high precision
Language: C - Size: 119 KB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0
khoih-prog/SAMDUE_TimerInterrupt 📦
This library enables you to use Interrupt from Hardware Timers on an SAM-DUE-based board. These SAM-DUE Hardware Timers, using Interrupt, still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software timers using millis() or micros(). That's mandatory if you need to measure some data requiring better accuracy. It now supports 16 ISR-based Timers, while consuming only 1 Hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based Timers. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks.
Language: C++ - Size: 207 KB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 1 - Forks: 0
khoih-prog/ESP_AT_WM_Lite 📦
Light-Weight WiFi/Credentials Manager for AVR Mega, SAM DUE, SAMD21, SAMD51, nRF52, STM32, RP2040-based RASPBERRY_PI_PICO, etc. boards running WizFi360ESP8266/ESP32-AT-command shields with web configuration portal. Powerful-yet-simple-to-use feature to enable adding dynamic custom parameters. You can also specify static AP and STA IP
Language: C++ - Size: 1.89 MB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 6 - Forks: 0
khoih-prog/Blynk_Esp8266AT_WM 📦
Simple WiFiManager for Blynk with MultiWiFi Credentials, for Mega, SAM DUE, SAMD21, SAMD51, nRF52, STM32, RP2040-based, etc. boards running ESP8266 AT shields. Configuration data saved in EEPROM, SAMD EEPROM-emulated FlashStorage, SAM-DUE DueFlashStorage or nRF52/RP2040 LittleFS
Language: C++ - Size: 3.09 MB - Last synced at: about 2 years ago - Pushed at: about 3 years ago - Stars: 3 - Forks: 2
khoih-prog/BlynkEthernet_WM 📦
This is the library, designed to help you eliminate hardcoding your Blynk credentials in Mega 1280, Mega 2560, Mega ADK, Teensy, SAM DUE, SAMD, RP2040-based, etc. boards using with Ethernet shields (W5100, W5200, W5500, ENC28J60, etc).
Language: C++ - Size: 1.69 MB - Last synced at: about 2 years ago - Pushed at: about 3 years ago - Stars: 1 - Forks: 0