charlescao460/iSkipper-In-One-Package

A hardware project for iSkipper

Size: 20.9 MB - Last synced at: 2 days ago - Pushed at: over 6 years ago - Stars: 12 - Forks: 0

shm-dmitry/auto_close_window

This IOT project allows you to open and close your window from any smart house. For example - you can setup rules like a "If night and noise greater then expected -> close window" and "Noise reduced -> open window"

Language: C - Size: 93.9 MB - Last synced at: 7 months ago - Pushed at: 7 months ago - Stars: 1 - Forks: 0

shm-dmitry/pantry_signal_system

This project contains schematics and firmware for controlling patry, garage, etc. Its including flooding sensor, auto air dryer and signal system. It connected to smart house using LoRa channel

Language: C++ - Size: 33.7 MB - Last synced at: 8 months ago - Pushed at: 8 months ago - Stars: 0 - Forks: 0

TMDevel89/EAGLE_Cad_V7

Size: 43 KB - Last synced at: 10 months ago - Pushed at: over 3 years ago - Stars: 0 - Forks: 0

broedsels/CSV-to-Neoden4

The easiest way to convert CSV files to Neoden 4.

Size: 31.6 MB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 10 - Forks: 1

teamonestone/ArduinoMegaShields

Shilds for the Arduino Mega.

Size: 486 KB - Last synced at: about 1 year ago - Pushed at: over 5 years ago - Stars: 4 - Forks: 1

shm-dmitry/climate_control_sensor

Firmware for a climate control device/sensor, based on ESP32 DevKit board

Language: C - Size: 5.3 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 1 - Forks: 0

TSMotter/eagle_scripts_ulps_libs

Customized Eagle CAD scripts, ULPs and Libraries

Size: 81.1 KB - Last synced at: about 2 years ago - Pushed at: over 3 years ago - Stars: 0 - Forks: 0

WhoIsMrRobotics/brainzy-board

⚡ An Arduino alternative board (based on teensy 3.5) to easily build your own differential or omnidirectional robot.

Size: 5.24 MB - Last synced at: almost 2 years ago - Pushed at: about 5 years ago - Stars: 0 - Forks: 0

Marc-Bender/htwsaarPraktischePhaseEvalBoardSTK681-332

An Evaluation Board for the STK681-332-E Motor-driver IC

Size: 331 KB - Last synced at: 9 months ago - Pushed at: over 5 years ago - Stars: 0 - Forks: 0

teamonestone/Line-Board

A CNY-70 based Line Sensor Board

Size: 316 KB - Last synced at: about 2 years ago - Pushed at: over 5 years ago - Stars: 2 - Forks: 0

teamonestone/i2c-multiplexer-breakout-board

A Breakout Borad for the Adafruit TCA9548A I²C Multiplexer Board.

Size: 390 KB - Last synced at: about 1 year ago - Pushed at: over 6 years ago - Stars: 2 - Forks: 0

ProgettoCompany/Progetto_One_Pin_Keypad_Eagle_Files

Design files for the One Pin Keypad, a device that simplifies the use of 16 button matrix keypads.

Size: 147 KB - Last synced at: almost 2 years ago - Pushed at: over 5 years ago - Stars: 0 - Forks: 1

RogerParkinson/ESP8266-01Flash

Eagle files for a board to help flash and ESP8266-01

Language: Prolog - Size: 34.2 KB - Last synced at: about 2 years ago - Pushed at: almost 7 years ago - Stars: 0 - Forks: 0

MBerka/AccelRecorder

C project and Eagle PCB files for acceleration recorder wearable

Language: C - Size: 624 KB - Last synced at: about 2 years ago - Pushed at: almost 7 years ago - Stars: 0 - Forks: 0