Ecosyste.ms: Repos
An open API service providing repository metadata for many open source software ecosystems.
GitHub topics: hardware-based-pwm
khoih-prog/RP2040_PWM 📦
This library enables you to use Hardware-based PWM channels on RP2040-based boards, such as Nano_RP2040_Connect, RASPBERRY_PI_PICO, with either Arduino-mbed (mbed_nano or mbed_rp2040) or arduino-pico core to create and output PWM any GPIO pin. The most important feature is they're purely hardware-based PWM channels, supporting very high PWM frequencies. Therefore, their executions are not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware-based PWMs, still work even if other software functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other software-based PWM using ISR, millis() or micros(). That's necessary if you need to control devices requiring high precision. New efficient setPWM_manual function to facilitate waveform creation using PWM
Language: C++ - Size: 206 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 38 - Forks: 9
khoih-prog/AVR_PWM 📦
This library enables you to use Hardware-based PWM channels on AVR-based boards, such as Nano, UNO, Mega, Leonardo, 32u4, etc., to create and output PWM. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms.
Language: C++ - Size: 117 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 5 - Forks: 0
khoih-prog/ATtiny_PWM 📦
This library enables you to use Hardware-based PWM channels on Arduino AVR ATtiny-based boards (ATtiny3217, etc.), using megaTinyCore, to create and output PWM to pins. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms
Language: C++ - Size: 352 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 2 - Forks: 1
khoih-prog/STM32_PWM 📦
This wrapper library enables you to use Hardware-based PWM on STM32F/L/H/G/WB/MP1 boards to create and output PWM to pins. The most important feature is they're purely hardware-based PWM channels. Therefore, their executions are very precise and not blocked by bad-behaving functions or tasks. This important feature is absolutely necessary for mission-critical tasks. These hardware PWM channels still work even if other functions are blocking. Moreover, they are much more precise (certainly depending on clock frequency accuracy) than other ISR-based or software-based PWM using millis() or micros(). That's necessary if you need to measure some data requiring very high frequency and much better accuracy. PWM feature can now be used.
Language: C - Size: 132 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 4 - Forks: 1
khoih-prog/Dx_PWM 📦
This library enables you to use Hardware-based PWM channels on Arduino AVRDx-based boards (AVR128Dx, AVR64Dx, AVR32Dx, etc.), using DxCore, to create and output PWM. Using similar functions as many other FastPWM libraries, it enables you to port PWM code easily between platforms.
Language: C++ - Size: 790 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 0 - Forks: 0
khoih-prog/nRF52_PWM 📦
This library enables you to use Hardware-based PWM channels on nRF52-based boards to create and output PWM to pins. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms.
Language: C++ - Size: 92.8 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 1 - Forks: 0
khoih-prog/SAMDUE_PWM 📦
This library, a wrapper around SAM DUE analogWrite() function, enables you to use Hardware-based PWM channels on SAM_DUE boards to create and output PWM to pins. Using similar functions as some other FastPWM libraries, it enables you to port PWM code easily between platforms
Language: C++ - Size: 56.6 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 0 - Forks: 0
khoih-prog/SAMD_PWM 📦
This library enables you to use Hardware-based PWM channels on SAMD21/SAMD51-based boards to create and output PWM to pins. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms.
Language: C++ - Size: 97.7 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 1 - Forks: 0
khoih-prog/megaAVR_PWM 📦
This library enables you to use Hardware-based PWM channels on megaAVR-based boards, such as UNO WiFi Rev2, AVR_Nano_Every, etc., to create and output PWM. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms.
Language: C++ - Size: 53.7 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 1 - Forks: 1
khoih-prog/ESP32_FastPWM 📦
This library, a wrapper around ESP32 ledc library, enables you to use Hardware-based PWM channels on ESP32, ESP32_S2, ESP32_S3 or ESP32_C3-based boards to create and output PWM to pins. Using similar functions as some other FastPWM libraries, it enables you to port PWM code easily between platforms.
Language: C++ - Size: 185 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 6 - Forks: 0
khoih-prog/Teensy_PWM 📦
This library enables you to use Hardware-based PWM channels on Teensy boards, such as Teensy 2.x, Teensy LC, Teensy 3.x, Teensy 4.x, Teensy MicroMod, etc., to create and output PWM to pins. Using the same functions as other FastPWM libraries to enable you to port PWM code easily between platforms.
Language: C++ - Size: 68.4 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 0 - Forks: 0