juanmf/StepperMotors

Python stepper motor library with customizable acceleration strategies and responsive, interruptible motor operations.

Language: Python - Size: 2.69 MB - Last synced at: 14 days ago - Pushed at: about 1 year ago - Stars: 24 - Forks: 0

omenxuinsgd/M-ONE_Controller_v1

CREATE by MajoreIT

Language: C++ - Size: 7.61 MB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 0 - Forks: 0

TZ0024/TestEQplatform1

ASCOM driver for tracking and guiding equatorial platform for dobsonian astronomical Telescope.

Language: C# - Size: 1.41 MB - Last synced at: about 2 months ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0

LasithaAmarasinghe/3D-Mapper

This 3D plotting device is developed for the semester 4 project under EN 2160: Electronic Design Realization.

Language: C++ - Size: 75.6 MB - Last synced at: 3 months ago - Pushed at: 4 months ago - Stars: 0 - Forks: 0

mfialaf/ESP32-Smart-curtains-system

Language: C++ - Size: 20.7 MB - Last synced at: about 2 months ago - Pushed at: over 2 years ago - Stars: 9 - Forks: 1

killinen/E39steerModule

This is steer actuator module for BMW E39 using with semi-autonomous software openpilot

Size: 698 KB - Last synced at: 9 months ago - Pushed at: 9 months ago - Stars: 6 - Forks: 6

thisistamim/TB6600-stepper-motor-driver-with-arduinoUno

Controlling TB6600 stepper motor driver with Arduino Uno R3 using AccelStepper library or without library.

Language: C++ - Size: 6.44 MB - Last synced at: over 1 year ago - Pushed at: about 2 years ago - Stars: 0 - Forks: 0

ThomasHeb/4AxisFoamCutter

Arduino based CNC foam cutter with display and SD-Card

Language: C - Size: 25.7 MB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 14 - Forks: 7

jkugalde/3DP-peristaltic-pump-stepper

A simple peristaltic pump, with bearings and 3d printed parts for a NEMA17

Language: C++ - Size: 89.3 MB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 13 - Forks: 1

sashuu69/automatic-writing-machine

Automatic writing machine is a CNC machine

Language: C++ - Size: 132 KB - Last synced at: almost 2 years ago - Pushed at: almost 4 years ago - Stars: 1 - Forks: 1

windfallw/EngineeringCompetition

工训赛-智能分类垃圾桶（硬件）

Language: Python - Size: 19.7 MB - Last synced at: about 2 years ago - Pushed at: about 4 years ago - Stars: 1 - Forks: 0

makerportal/nema17-python

Python codes for controlling a NEMA 17 stepper motor

Language: Python - Size: 15.6 KB - Last synced at: about 2 years ago - Pushed at: almost 4 years ago - Stars: 1 - Forks: 1

nager/Nager.ArduinoStepperMotor

.NET control a stepper motor via arduino

Language: C++ - Size: 1.31 MB - Last synced at: about 1 year ago - Pushed at: over 2 years ago - Stars: 2 - Forks: 1

algarv/Ball_Balancing_Robot

Source code and schematics for my spin on a BallBot

Language: C - Size: 412 MB - Last synced at: about 2 years ago - Pushed at: about 3 years ago - Stars: 1 - Forks: 0

MH15/swerve-arduino-core

Firmware for the S👐ERVE Project at The Ohio State University

Language: C++ - Size: 6.23 MB - Last synced at: over 1 year ago - Pushed at: about 6 years ago - Stars: 0 - Forks: 0