sparkfun/ESP32_Thing_Plus

ESP32 Thing-compatible board using the WROOM module and a QWIIC connector.

Size: 989 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 19 - Forks: 7

sparkfun/Serial_Basic_Breakout-CH340G

USB to Serial using the CH340G. Board follows the standard FTDI/Arduino pin out.

Size: 354 KB - Last synced at: 4 months ago - Pushed at: over 1 year ago - Stars: 14 - Forks: 8

sparkfun/FTDI_Basic_Breakout-5V

Hardware files for the FTDI Basic Breakout from SparkFun.

Size: 636 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 10 - Forks: 6

sparkfun/SAMD21_Pro_RF

The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board.

Language: C++ - Size: 22.8 MB - Last synced at: 3 months ago - Pushed at: over 1 year ago - Stars: 9 - Forks: 5

sparkfun/HTU21D_Breakout 📦

Breakout board for the HTU21D digital humidity sensor.

Language: C++ - Size: 267 KB - Last synced at: over 1 year ago - Pushed at: about 5 years ago - Stars: 35 - Forks: 22

sparkfun/LED_RingCoder_Breakout 📦

Example code and board files for LED RingCoder Breakout

Language: C++ - Size: 170 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 11 - Forks: 6

sparkfun/SM5100B_Cellular_Shield 📦

SM5100B cellular shield for Arduino Uno compatible boards, available from SparkFun Electronics.

Language: C++ - Size: 247 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 8 - Forks: 5

sparkfun/Qwiic_Magnetometer_MLX90393

The MLX90393 breakout can be used as a compass sensor but also works well as a non-contact controller, a flow meter with a magnetic impeller, or a linear actuator position sensor.

Language: C++ - Size: 416 KB - Last synced at: 4 months ago - Pushed at: about 7 years ago - Stars: 2 - Forks: 1

sparkfun/BlueSMiRF 📦

RN-41/42 bluetooth module breakout boards, available from SparkFun Electronics

Size: 239 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 13 - Forks: 7

sparkfun/Blynk_Board_ESP8266

ESP8266-based, Blynk-compatible, beginner-friendly programmable WiFi development board.

Language: C++ - Size: 1.11 MB - Last synced at: over 1 year ago - Pushed at: over 5 years ago - Stars: 23 - Forks: 23

sparkfun/Haptic_Motor_Driver

DRV2605L Haptic Motor driver

Language: C++ - Size: 2.57 MB - Last synced at: over 1 year ago - Pushed at: about 7 years ago - Stars: 14 - Forks: 9

sparkfun/Sound_Detector

Microphone with binary output indicating ambient sound, available from SparkFun Electronics.

Language: Eagle - Size: 417 KB - Last synced at: 4 months ago - Pushed at: almost 8 years ago - Stars: 30 - Forks: 11

sparkfun/Micro_Bit_Weather_Bit

Add on weather station module for the micro:bit ecosystem.

Size: 3.62 MB - Last synced at: 4 months ago - Pushed at: about 5 years ago - Stars: 7 - Forks: 5

sparkfun/RedBot

Design files and firmware files for the RedBot robotics board.

Language: C++ - Size: 915 KB - Last synced at: 3 months ago - Pushed at: about 7 years ago - Stars: 23 - Forks: 31

sparkfun/HX711-Load-Cell-Amplifier

A breakout board for the HX711 load cell weight measuring amplifier

Language: C++ - Size: 774 KB - Last synced at: over 1 year ago - Pushed at: about 6 years ago - Stars: 147 - Forks: 88

sparkfun/ArduinoInventorsGuideResources

These are code examples and cutting templates for the SparkFun's Arduino Inventor's Guide

Language: C++ - Size: 3.12 MB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 3 - Forks: 2

sparkfun/SparkFun_GPS_Breakout_XA1110_Qwiic

The Qwiic GPS uses the Titan X1 GPS module with special I2C firmware.

Language: C++ - Size: 574 KB - Last synced at: 3 months ago - Pushed at: about 5 years ago - Stars: 9 - Forks: 0

sparkfun/Rogue_Router

Solar Access Point Fileserver for Sparkfun Thing

Language: Arduino - Size: 4.62 MB - Last synced at: 3 months ago - Pushed at: over 9 years ago - Stars: 49 - Forks: 9

sparkfun/nRF52840_Breakout_MDBT50Q

Breakout board for the MDBT50Q nRF52840 module

Language: C - Size: 8.97 MB - Last synced at: 3 months ago - Pushed at: about 5 years ago - Stars: 28 - Forks: 8

sparkfun/LuMini_2_Inch

The APA102-2020 LuMini rings are a great way to add high density light rings to your project.

Language: C++ - Size: 1.31 MB - Last synced at: over 1 year ago - Pushed at: over 5 years ago - Stars: 1 - Forks: 0

sparkfun/LTE_Cat_M1_Shield

Arduino shield featuring a SARA-R410M-02B module, which supports both Cat M1 and NB-IoT

Size: 17.5 MB - Last synced at: over 1 year ago - Pushed at: about 2 years ago - Stars: 15 - Forks: 0

sparkfun/Digital_Sandbox

Digital Sandbox Development platform

Language: Eagle - Size: 953 KB - Last synced at: over 1 year ago - Pushed at: over 8 years ago - Stars: 8 - Forks: 5

sparkfun/Copernicus_II_DIP_Module

This breakout board allows access to the SMD pins of the Copernicus II GPS module from Trimble.

Language: C++ - Size: 121 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 4 - Forks: 3

sparkfun/LiPo_Charger_Plus

The SparkFun LiPo Charger Plus is the souped-up power option in the SparkFun line of single-cell lithium polymer (LiPo) battery chargers

Size: 220 KB - Last synced at: over 1 year ago - Pushed at: over 2 years ago - Stars: 8 - Forks: 0

sparkfun/Ardumoto-Motor_Driver_Shield

Ardumoto Motor Driver Shield for Arduino, created by and available from SparkFun Electronics

Language: C++ - Size: 506 KB - Last synced at: over 1 year ago - Pushed at: almost 6 years ago - Stars: 9 - Forks: 7

sparkfun/Easy_Driver

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).

Language: C++ - Size: 511 KB - Last synced at: over 1 year ago - Pushed at: over 4 years ago - Stars: 28 - Forks: 14

sparkfun/Logomatic Fork of SFE-Chris/Logomatic-V2

Main firmware for the Logomatic Version 2

Language: C - Size: 710 KB - Last synced at: over 1 year ago - Pushed at: almost 7 years ago - Stars: 14 - Forks: 26

sparkfun/Tilt-a-Whirl_Breakout 📦

Breakout for the RPI-1031 at Sparkfun.com

Language: C++ - Size: 121 KB - Last synced at: over 1 year ago - Pushed at: over 7 years ago - Stars: 4 - Forks: 1

sparkfun/BMP180_Breakout 📦

Breakout board for the Bosch BMP180 barometric pressure sensor

Language: C++ - Size: 1.31 MB - Last synced at: over 1 year ago - Pushed at: almost 7 years ago - Stars: 69 - Forks: 101

sparkfun/CAN-Bus_Shield

Language: C++ - Size: 653 KB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 79 - Forks: 54

sparkfun/ESP8266_WiFi_IR_Blaster

The WiFi IR Blaster is designed to connect all of your old, legacy IR-controlled devices to a WiFi network -- exposing them to a new method of control.

Language: Game Maker Language - Size: 3.73 MB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 8 - Forks: 0

sparkfun/SparkFun-Fuse-Breakout-Board

This is a breakout board for the glass ferrule type fuse.

Size: 318 KB - Last synced at: 4 months ago - Pushed at: almost 6 years ago - Stars: 0 - Forks: 0

sparkfun/ProtoSnap-LilyPad_Development_Board

Language: Arduino - Size: 249 KB - Last synced at: 3 months ago - Pushed at: over 7 years ago - Stars: 10 - Forks: 4

sparkfun/ATX_Power_Connector_Breakout

The ATX power connector breakout board breaks out the standard 4-pin computer peripheral port when mated with an ATX connector for your 12V and 5V devices!

Size: 249 KB - Last synced at: over 1 year ago - Pushed at: almost 2 years ago - Stars: 0 - Forks: 0

sparkfun/SparkFun_Red-V_Thing_Plus

The SparkFun RED-V Thing Plus is a low-cost, development board featuring the Freedom E310 SoC which brings with it the RISC-V instruction set architecture (ISA).

Size: 715 KB - Last synced at: 4 months ago - Pushed at: over 5 years ago - Stars: 13 - Forks: 3

sparkfun/LIS3DH_Breakout

SparkFun Triple Axis Accelerometer Breakout - LIS3DH

Language: Eagle - Size: 216 KB - Last synced at: over 1 year ago - Pushed at: over 8 years ago - Stars: 3 - Forks: 3

sparkfun/Fingerprint_Scanner-TTL

Repository with example code for SEN-14585 & SEN-14585 at SparkFun.com

Language: C++ - Size: 44.9 KB - Last synced at: over 1 year ago - Pushed at: about 6 years ago - Stars: 107 - Forks: 112

sparkfun/Arduino_Pro_Mini_328

SparkFun's Arduino Pro Mini 328 is a bare bones super small Arduino compatible development board.

Size: 2.67 MB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 94 - Forks: 50

gmparis/CircuitPython_I2C_Button

CircuitPython I2C Button à la Sparkfun Qwiic Button/Switch/Arcade

Language: Python - Size: 127 KB - Last synced at: 3 months ago - Pushed at: about 4 years ago - Stars: 3 - Forks: 0

sparkfun/IOIO-OTG

Development Board for Android

Language: Eagle - Size: 21.4 MB - Last synced at: over 1 year ago - Pushed at: about 9 years ago - Stars: 25 - Forks: 11

sparkfun/ESP8266_WiFi_Shield

An Arduino WiFi Shield based around the Espressif ESP8266 WiFi SoC.

Language: Eagle - Size: 672 KB - Last synced at: over 1 year ago - Pushed at: almost 10 years ago - Stars: 14 - Forks: 8

sparkfun/Qwiic_MP3_Trigger

Play sounds quick and easy using the SparkFun Qwiic MP3 player!

Language: C++ - Size: 35.7 MB - Last synced at: 3 months ago - Pushed at: over 3 years ago - Stars: 8 - Forks: 1

sparkfun/Wake_on_shake

Example code and board files for the ADXL362 Wake On Shake board

Language: C - Size: 1.03 MB - Last synced at: 3 months ago - Pushed at: over 7 years ago - Stars: 8 - Forks: 9

sparkfun/Load_Sensor_Combinator

A PCB to combine four individual strain gauges or load sensors into the standard wheat bridge configuration and 4-color wiring found on load cells.

Language: Eagle - Size: 110 KB - Last synced at: over 1 year ago - Pushed at: over 8 years ago - Stars: 7 - Forks: 9

sparkfun/Photon_Weather_Shield 📦

A weather shield for the Particle Photon.

Language: C++ - Size: 10.6 MB - Last synced at: over 1 year ago - Pushed at: about 2 years ago - Stars: 24 - Forks: 21

sparkfun/SparkFun_Differential_I2C_Breakout_PCA9615_Qwiic

Extend your I2C communication bus with the Qwiic Long Distance board.

Size: 715 KB - Last synced at: 4 months ago - Pushed at: over 4 years ago - Stars: 6 - Forks: 1

sparkfun/LilyPad_ProtoSnap_Plus

Snappable prototyping board with 32u4, light sensor, buzzer, button, and leds.

Size: 6.02 MB - Last synced at: over 1 year ago - Pushed at: over 7 years ago - Stars: 1 - Forks: 1

sparkfun/Artemis_Thing_Plus

Size: 291 KB - Last synced at: over 1 year ago - Pushed at: almost 6 years ago - Stars: 4 - Forks: 0

sparkfun/ESP8266_Thing_Dev

An all-in-one development board for the ESP8266 including an FTDI FT231X for USB programming.

Size: 418 KB - Last synced at: over 1 year ago - Pushed at: over 4 years ago - Stars: 12 - Forks: 11

sparkfun/SparkFun_Cryptographic_Co-Processor_Breakout_ATECC508A_Qwiic

Product Repo for the ATECC508a Cryptographic Co-processor.

Size: 1.56 MB - Last synced at: 4 months ago - Pushed at: over 5 years ago - Stars: 4 - Forks: 3

sparkfun/Qwiic_Transparent_Graphical_OLED

Hardware repo for the Transparent Graphical OLED

Language: C++ - Size: 13.5 MB - Last synced at: 3 months ago - Pushed at: over 6 years ago - Stars: 11 - Forks: 3

sparkfun/Bluetooth_Mate

These bluetooth wireless modems work as a TTL serial (RX/TX) pipe and are designed to mate directly with Arduino Pro, Pro Mini and LilyPad boards.

Size: 500 KB - Last synced at: over 1 year ago - Pushed at: almost 7 years ago - Stars: 14 - Forks: 8

sparkfun/RPi_PanTilt_Camera_Kit

Example code for the the SparkFun Raspberry Pi Zero Pan Tilt Camera Kit.

Language: Python - Size: 4.88 KB - Last synced at: 3 months ago - Pushed at: almost 7 years ago - Stars: 6 - Forks: 4

Zanduino/BME680

Arduino Library to access the Bosch BME680 - temperature, pressure, humidity and gas sensor

Language: C++ - Size: 5.11 MB - Last synced at: about 2 years ago - Pushed at: almost 3 years ago - Stars: 33 - Forks: 9

sparkfun/SunnyBuddy

MPPT single-cell LiPo battery charger based on the LT3562

Size: 366 KB - Last synced at: 4 months ago - Pushed at: over 6 years ago - Stars: 31 - Forks: 22

sparkfun/Gram_Piano 📦

A keyboard that allows you to play music with capacitive touch inputs.

Language: C++ - Size: 228 KB - Last synced at: over 1 year ago - Pushed at: about 7 years ago - Stars: 3 - Forks: 5

sparkfun/tsunami

Second-generation polyphonic wav player.

Size: 9.82 MB - Last synced at: 4 months ago - Pushed at: over 2 years ago - Stars: 13 - Forks: 3

paulvha/MicroMod

Software for different SparkFun Micromod boards

Language: C - Size: 3.84 MB - Last synced at: about 2 years ago - Pushed at: about 2 years ago - Stars: 0 - Forks: 0

sparkfun/gator_bit

Breakout board for the micro:bit that allows alligator clips to be attached to every pin. Provides protection from improper use and comes with 5 WS2812 LEDs and a speaker.

Size: 2.07 MB - Last synced at: over 1 year ago - Pushed at: over 3 years ago - Stars: 3 - Forks: 1

sparkfun/LumiDrive

The LumiDrive LED Driver is SparkFun’s foray into all things Python on micro-controllers.

Size: 583 KB - Last synced at: 14 days ago - Pushed at: over 6 years ago - Stars: 1 - Forks: 0

sparkfun/Qduino_Mini_SFE

Storefront version of the Qduino Mini

Size: 31.1 MB - Last synced at: 18 days ago - Pushed at: over 2 years ago - Stars: 7 - Forks: 1

sparkfun/LuMini_3_Inch

The APA102-2020 LuMini rings are a great way to add high density light rings to your project.

Language: C++ - Size: 2.22 MB - Last synced at: over 1 year ago - Pushed at: over 5 years ago - Stars: 2 - Forks: 1

sparkfun/ADXL335_Breakout

ADXL335 Breakout board available from SparkFun Electronics

Size: 153 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 2 - Forks: 6

sparkfun/Touch_Potentiometer

The Touch Potentiometer is a collaboration between DanJulioDesigns and SparkFun Electronics. The Touch Pot allows you to easily integrate a slide potentiometer into any project that requires such an interface, such as the volume control on a stereo.

Size: 985 KB - Last synced at: 4 months ago - Pushed at: over 4 years ago - Stars: 4 - Forks: 0

awesome-pentest-gadgets/BadUSB Fork of Include-sys/BadUSB

BadUSB Penetration

Language: C++ - Size: 225 KB - Last synced at: about 2 years ago - Pushed at: about 7 years ago - Stars: 9 - Forks: 2

n8many/TMP102py

Python library for reading TMP102 sensor from Sparkfun

Language: Python - Size: 13.7 KB - Last synced at: over 2 years ago - Pushed at: about 8 years ago - Stars: 7 - Forks: 4

sparkfun/Qwiic_Button

The SparkFun Qwiic Button is an I2C enabled button with a built-in LED, interrupts, variable I2C address, and onboard button queues.

Language: C++ - Size: 2.08 MB - Last synced at: 3 months ago - Pushed at: over 4 years ago - Stars: 4 - Forks: 4

sparkfun/Low_Current_Sensor_Breakout-ACS712 📦

SparkFun Low Current Sensor Breakout Board - ACS712

Language: C++ - Size: 490 KB - Last synced at: over 1 year ago - Pushed at: about 7 years ago - Stars: 18 - Forks: 6

sparkfun/VKey_Voltage_Keypad 📦

Analog voltage output 12-key pad available from SparkFun Electronics

Language: C++ - Size: 542 KB - Last synced at: over 1 year ago - Pushed at: almost 7 years ago - Stars: 4 - Forks: 1

sparkfun/LiPower-Shield 📦

A shield for adding LiPo battery power to your Arduino, available from SparkFun Electronics

Size: 1.01 MB - Last synced at: over 1 year ago - Pushed at: almost 7 years ago - Stars: 2 - Forks: 3

sparkfun/IR_Receiver_Breakout 📦

SparkFun IR Receiver Breakout - TSOP85.

Language: C++ - Size: 30.3 KB - Last synced at: over 1 year ago - Pushed at: almost 7 years ago - Stars: 2 - Forks: 1

sparkfun/TMP006-Temp_Sensor_Breakout 📦

A breakout board for the TMP006 temperature sensor.

Language: C++ - Size: 214 KB - Last synced at: over 1 year ago - Pushed at: almost 7 years ago - Stars: 5 - Forks: 3

sparkfun/Uh-Oh_Battery_Indicator 📦

Kit that turns on an LED when voltage drops below a settable threshold. Available from SparkFun Electronics.

Size: 59.6 KB - Last synced at: over 1 year ago - Pushed at: almost 7 years ago - Stars: 2 - Forks: 4

sparkfun/SHT15_Breakout 📦

Language: C++ - Size: 260 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 9 - Forks: 12

sparkfun/Window_Comparator 📦

SparkFun Window Comparator

Size: 48.8 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 1 - Forks: 1

sparkfun/MyDAQ_Protoboard_Kit 📦

Size: 110 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 0 - Forks: 1

sparkfun/Ludus_ProtoShield 📦

Proto-shield for Connect AnyThing

Language: C++ - Size: 1.09 MB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 2 - Forks: 3

sparkfun/USB_Weather_Board 📦

Example code and board files for the USB Weather Board

Language: C++ - Size: 2.9 MB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 10 - Forks: 14

sparkfun/Pro_Mini_Candy 📦

Holiday special version of 5V Pro Mini, available from SparkFun Electronics

Size: 637 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 1 - Forks: 2

sparkfun/Pi_Wedge 📦

Breakout for Raspberry Pi GPIOs available from SparkFun Electronics

Language: C++ - Size: 256 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 6 - Forks: 3

sparkfun/Pi_Wedge_B_Plus 📦

IO Connector breakout for the RPi B+

Language: C++ - Size: 188 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 3 - Forks: 2

sparkfun/Venus_GPS_SMA_Connector 📦

SparkFun Venus GPS with SMA Connector. Manufactured by and available from SparkFun Electronics

Size: 217 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 5 - Forks: 3

sparkfun/GPS_Evaluation_Board_GP-2106 📦

SparkFun GPS Evaluation Board - GP-2106

Size: 69.3 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 1 - Forks: 1

sparkfun/MiniMoto 📦

Small I2C-based DC motor driver

Language: C++ - Size: 190 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 2 - Forks: 3

sparkfun/Venus_GPS_Logger_SMA 📦

Venus GPS Logger with SMA Connector / GPS-10920

Size: 187 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 0 - Forks: 1

sparkfun/LS20126_GPS_Breakout 📦

LS20126 GPS Breakout available from SparkFun Electronics

Size: 17.6 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 1 - Forks: 1

sparkfun/GP-2106_Breakout 📦

SparkFun GP-2106 Breakout

Size: 60.5 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 1 - Forks: 0

sparkfun/PWM_Shield 📦

SparkFun Arduino PWM Shield-TLC5940.

Language: C - Size: 147 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 4 - Forks: 3

sparkfun/fabFM-Kit 📦

FM radio kit with enclosure

Language: C++ - Size: 315 KB - Last synced at: over 1 year ago - Pushed at: over 6 years ago - Stars: 9 - Forks: 6

sparkfun/FPGA_Tutorial 📦

Language: Verilog - Size: 11.7 KB - Last synced at: over 1 year ago - Pushed at: about 6 years ago - Stars: 6 - Forks: 3

sparkfun/Audio-Sound_Breakout-WTV020SD 📦

Example firmware and hardware files for the WTV020SD-based Audio-Sound breakout board.

Language: C++ - Size: 204 KB - Last synced at: over 1 year ago - Pushed at: about 6 years ago - Stars: 7 - Forks: 7

sparkfun/Logic_Level_Converter 📦

Size: 304 KB - Last synced at: over 1 year ago - Pushed at: almost 6 years ago - Stars: 7 - Forks: 5

sparkfun/LilyPad_USB_Plus_Standalone

This is the LilyPad USB Plus, a sewable electronics microcontroller board controlled by an ATmega32U4 with the Arduino bootloader.

Size: 643 KB - Last synced at: over 1 year ago - Pushed at: about 7 years ago - Stars: 1 - Forks: 1

sparkfun/MAG3110_Breakout_Board 📦

Breakout board for Freescale's MAG3110 Triple Axis Magnetometer

Size: 659 KB - Last synced at: over 1 year ago - Pushed at: about 5 years ago - Stars: 3 - Forks: 4

sparkfun/MEMS_Mic_Breakout-ADMP401 📦

SparkFun MEMS Microphone Breakout - INMP401 (ADMP401)

Language: C++ - Size: 160 KB - Last synced at: over 1 year ago - Pushed at: about 4 years ago - Stars: 13 - Forks: 6

sparkfun/RHT03 📦

RHT03 Humidity and temperature sensor

Language: C++ - Size: 24.4 KB - Last synced at: over 1 year ago - Pushed at: over 3 years ago - Stars: 20 - Forks: 11

sparkfun/ESP8266_Thing

A breakout and development board for the ESP8266 WiFi SoC.

Size: 1.93 MB - Last synced at: over 1 year ago - Pushed at: about 5 years ago - Stars: 42 - Forks: 19

sparkfun/9DOF_Sensor_Stick

Product 10724 9 DOF Sensor Stick

Size: 950 KB - Last synced at: over 1 year ago - Pushed at: almost 7 years ago - Stars: 6 - Forks: 4

sparkfun/SparkFun_Qwiic_Micro_SAMD21E

Hardware repo for the Qwiic Micro SAMD21E development board.

Language: C++ - Size: 15.5 MB - Last synced at: 3 months ago - Pushed at: about 4 years ago - Stars: 6 - Forks: 3

sparkfun/Lumenati_8-pack

A coin-sized board equipped with 7x APA102C LEDs surrounding the outer edge of the board, with 1x in the center.

Size: 520 KB - Last synced at: over 1 year ago - Pushed at: over 7 years ago - Stars: 1 - Forks: 0