Stefal/rtkbase

Your own GNSS base station for RTK localization with a Web GUI

Language: Python - Size: 172 MB - Last synced at: 1 day ago - Pushed at: 1 day ago - Stars: 571 - Forks: 137

semuconsulting/pyubx2

Python library for parsing and generating UBX GPS/GNSS protocol messages.

Language: Python - Size: 4.43 MB - Last synced at: 7 days ago - Pushed at: 7 days ago - Stars: 198 - Forks: 70

FeruzTopalov/spoke

Standalone LoRa-based real-time off-grid relative GPS navigation for group of up to 5 people. Improved version of LRNS Eleph

Language: C - Size: 40 MB - Last synced at: 2 days ago - Pushed at: 2 days ago - Stars: 11 - Forks: 1

sparkfun/SparkFun_RTK_Facet

The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.

Size: 125 MB - Last synced at: 7 days ago - Pushed at: 7 months ago - Stars: 20 - Forks: 4

phkehl/ubloxcfg

u-blox 9 positioning receivers configuration library and tool

Language: C++ - Size: 13.4 MB - Last synced at: about 2 months ago - Pushed at: about 2 months ago - Stars: 57 - Forks: 16

ldab/u-blox_GNSS

u-blox GNSS receiver library light weight for low power tracking application

Language: C++ - Size: 6.21 MB - Last synced at: 8 days ago - Pushed at: almost 5 years ago - Stars: 25 - Forks: 5

Nanich87/u-blox-neo-m8n

How to enable raw GNSS data in u-blox NEO-M8N receivers (Firmware 2.01)

Language: Batchfile - Size: 143 KB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 4 - Forks: 1

fenrir-naru/gps_pvt

Ruby GNSS PVT (position, velocity and time) solver

Language: C++ - Size: 1.31 MB - Last synced at: 2 months ago - Pushed at: 2 months ago - Stars: 2 - Forks: 5

mkgrgis/u-blox_posgtges_gnss_mon

U-Blox PostgreSQL GNSS monitor - time, coordinate, satellite parametres etc. logger

Language: C - Size: 149 KB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0

a-int/nrf_gnss

GNSS learning based on U-Blox M8N and nRF5340

Language: C - Size: 95.7 KB - Last synced at: 3 months ago - Pushed at: 3 months ago - Stars: 0 - Forks: 0

alkeldi/pyrtkgps

Manage Real-Time Kinematic GPS (RTK-GPS) with Python

Language: Python - Size: 9.77 KB - Last synced at: about 1 month ago - Pushed at: almost 3 years ago - Stars: 7 - Forks: 2

hvandermarel/ubxlogger

U-blox ZED-F9P GNSS logging scripts for OpenWrt routers and Single Board Computers.

Language: Shell - Size: 5.38 MB - Last synced at: 8 days ago - Pushed at: 5 months ago - Stars: 1 - Forks: 1

rrainey/dropkick

A data logger designed for skydivers

Language: Prolog - Size: 107 MB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 4 - Forks: 0

u-blox/ubxlib 📦

Portable C libraries which provide APIs to build applications with u-blox products and services. Delivered as add-on to existing microcontroller and RTOS SDKs.

Language: C - Size: 17.4 MB - Last synced at: 5 months ago - Pushed at: 5 months ago - Stars: 312 - Forks: 94

u-blox/m-center

Collection of AT scripts that can be incorporated and used on the u-blox m-center tool.

Size: 192 KB - Last synced at: 6 months ago - Pushed at: 6 months ago - Stars: 15 - Forks: 5

N129BZ/ublox-reader

Full node.js implementation of message parsing from U-Blox GPS usb devices

Language: JavaScript - Size: 172 KB - Last synced at: 6 months ago - Pushed at: 6 months ago - Stars: 0 - Forks: 1

ldab/Node-RED-Energy-Harvesting-dashboard

Node-RED Energy Harvesting dashboard example, weather forecast, temperature and humidty measurement. MQTT, ESP32, u-blox NINA-W10, HTU21D, IBM Cloud, CloudMQTT

Language: C++ - Size: 5.15 MB - Last synced at: 8 days ago - Pushed at: over 5 years ago - Stars: 9 - Forks: 7

ldab/esp-gateway-long-range Fork of espressif/esp-iot-bridge

esp32s3 WiFi Gateway, kind of Long Range extender

Language: C - Size: 8.57 MB - Last synced at: 8 days ago - Pushed at: over 1 year ago - Stars: 17 - Forks: 2

UncleRus/MultiOSD

MinimOSD firmware for OpenPilot/LibrePilot CC/CC3D/Atom/Revolution/Revo Nano, MAVLink (APM/Pixhawk PX4/Paparazzi/generic MAVLink), GPS u-blox, TauLabs, dRonin

Language: C - Size: 5.24 MB - Last synced at: about 7 hours ago - Pushed at: over 7 years ago - Stars: 45 - Forks: 18

Bsm-B/Stm32-ublox-7c

Integrating the u-blox 7C GNSS module with the STM32 microcontroller over DMA

Language: C - Size: 2.68 MB - Last synced at: 9 months ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

shishir-dey/pcb-rf-4g-ublox

PCB with a u-blox TOBY-L2 LTE Cat 4 module (+ STM32F407). Made with KiCad

Size: 514 KB - Last synced at: about 2 months ago - Pushed at: over 3 years ago - Stars: 2 - Forks: 0

SML-Posey/posey-firmware

Posey device firmware for vx and rx platforms.

Language: C - Size: 341 KB - Last synced at: 9 months ago - Pushed at: 9 months ago - Stars: 0 - Forks: 0

Sunnnset5/gnss_addinfo_decoder

GNSS additional info decoder for U-Blox receivers.

Language: Python - Size: 149 KB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 2 - Forks: 1

Megidish/ublox-time-compare

Classification on a u-blox sensor with NTP server

Language: Python - Size: 4.92 MB - Last synced at: 10 months ago - Pushed at: 10 months ago - Stars: 1 - Forks: 0

adfelippe/u-doom

Doom port for ubxlib - Streaming Doom over BLE using a u-blox EVK

Language: C - Size: 188 KB - Last synced at: 11 months ago - Pushed at: 11 months ago - Stars: 2 - Forks: 0

Udj13/Agro-Navigation-receiver

Building instructions DIY GPS receiver for the parallel driving app.

Size: 123 KB - Last synced at: 11 months ago - Pushed at: 11 months ago - Stars: 1 - Forks: 0

mlab-modules/GPS02

GPS02B is GNSS reciever ready to RTK (Real time kinematics) technology

Language: HTML - Size: 7.75 MB - Last synced at: about 1 year ago - Pushed at: about 1 year ago - Stars: 6 - Forks: 8

sparkfun/SparkFun_u-blox_NEO-M8U

Size: 9.45 MB - Last synced at: about 2 months ago - Pushed at: about 3 years ago - Stars: 5 - Forks: 2

sijskes/gpsinfo

GPS info, support software for PA0JBBs GPSDO

Language: C++ - Size: 44.9 KB - Last synced at: about 1 year ago - Pushed at: almost 8 years ago - Stars: 0 - Forks: 0

ldab/WimB

Where is my Bike - IoT project based on u-blox GNSS and NB-IoT modules

Language: C++ - Size: 29.7 MB - Last synced at: 8 days ago - Pushed at: almost 6 years ago - Stars: 2 - Forks: 2

stargo/LadyHeatherGPS

Lady Heather's Disciplined Oscillator Control Program from Mark S. Sims

Language: C++ - Size: 6.25 MB - Last synced at: over 1 year ago - Pushed at: over 1 year ago - Stars: 0 - Forks: 0

phlpjo/MkrGsm1400IoT

Toolbox for the MKR GSM 1400

Language: C++ - Size: 49.8 KB - Last synced at: over 1 year ago - Pushed at: over 4 years ago - Stars: 2 - Forks: 0

TobleMiner/ublox-M8030-KT-breakout

Breakout for the bare UBX-M8030-KT chip. Supports pin compatible chips from M6, M7 and M8 generations. JLCSMT assembly supported

Size: 973 KB - Last synced at: over 1 year ago - Pushed at: almost 3 years ago - Stars: 0 - Forks: 0

ldab/esp32_BLEtoMQTTBridge

BLE to MQTT Bridge using espressiff esp32 reading nRF52840 BLE-node. As a gateway includes Lux (BH1750), temperature and humidyty (HTU21D), CO2 and TVOC (CCS811)

Language: C++ - Size: 35.2 KB - Last synced at: 8 days ago - Pushed at: over 3 years ago - Stars: 5 - Forks: 2

Opendigitalradio/lea-m8f-board

A USRP B200 compatible GPSDO board with the u-blox LEA-M8F

Language: KiCad - Size: 1.94 MB - Last synced at: over 1 year ago - Pushed at: almost 9 years ago - Stars: 11 - Forks: 6

Nanich87/ublox-zed-f9p-enclosure

Enclosure for u-blox ZED-F9P GNSS module

Size: 174 KB - Last synced at: almost 2 years ago - Pushed at: almost 2 years ago - Stars: 0 - Forks: 0

swisscheese38/rtklawnmower

ROS and GPS RTK based lawn mower

Language: Python - Size: 133 KB - Last synced at: almost 2 years ago - Pushed at: almost 2 years ago - Stars: 2 - Forks: 0

mayeranalytics/pyUBX

Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.

Language: Python - Size: 178 KB - Last synced at: about 2 years ago - Pushed at: about 4 years ago - Stars: 76 - Forks: 35

khoih-prog/GSM_Generic 📦

Enables GSM/GRPS network connection using the GSM/GPRS modules. Use this library to make/receive voice calls, to send and receive SMS using Generic GSM/GPRS modules, such as u-blox SARA-U201 module.This library also allows you to connect to internet through the GPRS networks. You can either use Web Clients and Servers.

Language: C++ - Size: 1.27 MB - Last synced at: about 2 years ago - Pushed at: over 2 years ago - Stars: 18 - Forks: 5

uraimo/UBloxGPS.swift

A Swift library for boards with the u-Blox 6/7/8 family of A-GPS receivers

Language: Swift - Size: 3.08 MB - Last synced at: 15 days ago - Pushed at: over 5 years ago - Stars: 9 - Forks: 1

ckuhtz/picise

Prototype for a time / location GNSS accessory for a Raspberry Pi 40-pin GPIO.

Language: HTML - Size: 18.8 MB - Last synced at: 8 days ago - Pushed at: over 2 years ago - Stars: 0 - Forks: 0

alschube/gnss-navigation-status

This project was developed in the context of a bachelor's thesis for the applied science degree programme at Heilbronn University. The Goal of this project was centimeter-accurate positioning with a raspberry pi gnss module.

Language: Python - Size: 10.5 MB - Last synced at: about 2 years ago - Pushed at: over 3 years ago - Stars: 3 - Forks: 2

mayeranalytics/pyUBX-Cpp

C++ Parser/Generator for UBX protocol messages - generated by pyUBX

Language: C++ - Size: 63.5 KB - Last synced at: about 2 years ago - Pushed at: over 7 years ago - Stars: 6 - Forks: 3

halmaia/SimpleUBGNSS

Simple, experimental UBX reader for u-blox GNSS. Under construction.

Language: C# - Size: 24.4 KB - Last synced at: about 2 years ago - Pushed at: about 3 years ago - Stars: 1 - Forks: 0

lpechacek/u-blox-gnss-receiver

Document about design of a GNSS receiver

Size: 14.7 MB - Last synced at: about 2 years ago - Pushed at: almost 5 years ago - Stars: 15 - Forks: 2

rfrht/gps-reference

GPS-aided programmable precision signal generator

Size: 1.91 MB - Last synced at: about 2 years ago - Pushed at: over 5 years ago - Stars: 4 - Forks: 1

unforgiven512/Location-Tracking-using-SAMR34-and-UBLOX-GPS-Module Fork of MicrochipTech/Location-Tracking-using-SAMR34-and-UBLOX-GPS-Module

Location Tracking Application (adapted for ttnmapper) on SAMR34 Xplained Pro using a u-blox GPS module (the LEA-6S via the GPS "click board" or NEO-6M as a generic standalone module).

Size: 2 MB - Last synced at: about 2 years ago - Pushed at: over 4 years ago - Stars: 2 - Forks: 0

ldab/BLE-node-u-blox

u-blox NINA-B3 BLE node, based on nRF52840 and SHTC3

Language: C - Size: 2.56 MB - Last synced at: 8 days ago - Pushed at: over 1 year ago - Stars: 2 - Forks: 3

ldab/Arduino-u-blox-NINA-B1

u-blox NINA-B1 Arduino example + SHT31 temperature and humidity + Bluetooth BLE

Language: C++ - Size: 29.3 KB - Last synced at: 8 days ago - Pushed at: about 6 years ago - Stars: 3 - Forks: 1

etfovac/lv_tcp_gps

Language: LabVIEW - Size: 379 KB - Last synced at: about 2 years ago - Pushed at: about 4 years ago - Stars: 0 - Forks: 0

CF20852/Hike-Elevation-Gain-System

Arduino-based tool to record GPS latitude, longitude, and elevation plus barometric elevation, and Excel workbook to post-process data.

Language: HTML - Size: 16.4 MB - Last synced at: about 2 years ago - Pushed at: almost 7 years ago - Stars: 1 - Forks: 1

ldab/Arduino-u-blox-NINA-W10

u-blox NINA-W10 WiFi and Bluetooth module Arduino example

Language: C++ - Size: 349 KB - Last synced at: 8 days ago - Pushed at: about 6 years ago - Stars: 1 - Forks: 1