BlackbirdHQ/ublox-short-range-rs

A driver crate for the entire u-blox short range family in Rust

Language: Rust - Size: 654 KB - Last synced: about 16 hours ago - Pushed: about 18 hours ago - Stars: 6 - Forks: 2

u-blox/ubxlib

Portable C libraries which provide APIs to build applications with u-blox products and services. Delivered as add-on to existing microcontroller and RTOS SDKs.

Language: C - Size: 16.3 MB - Last synced: 3 days ago - Pushed: 3 days ago - Stars: 277 - Forks: 79

vshymanskyy/TinyGSM

A small Arduino library for GSM modules, that just works

Language: C++ - Size: 187 MB - Last synced: 3 days ago - Pushed: 3 days ago - Stars: 1,886 - Forks: 701

semuconsulting/pyspartn

Python library for parsing SPARTN protocol messages.

Language: Python - Size: 16.2 MB - Last synced: 11 days ago - Pushed: 11 days ago - Stars: 4 - Forks: 2

u-blox/m-center

Collection of AT scripts that can be incorporated and used on the u-blox m-center tool.

Size: 363 KB - Last synced: 16 days ago - Pushed: 17 days ago - Stars: 12 - Forks: 5

HKUST-Aerial-Robotics/ublox_driver

A driver for u-blox receiver (ZED-F9P) with ros support

Language: C++ - Size: 55.7 KB - Last synced: 18 days ago - Pushed: 18 days ago - Stars: 87 - Forks: 40

mohamedrezk122/tivac-based-map-router

A gps tracking system with shortest path algorithm and more implemented on bare-metal TM4C123GXL tivac micro-controller

Language: C - Size: 2.73 MB - Last synced: 22 days ago - Pushed: 11 months ago - Stars: 3 - Forks: 0

KumarRobotics/ublox

A driver for ublox gps

Language: C++ - Size: 1.12 MB - Last synced: 20 days ago - Pushed: 7 months ago - Stars: 415 - Forks: 366

emlid/Navio2

C++ and Python sensor examples for developers

Language: C++ - Size: 372 KB - Last synced: 16 days ago - Pushed: about 2 months ago - Stars: 171 - Forks: 119

Nanich87/u-blox-neo-m8n

How to enable raw GNSS data in u-blox NEO-M8N (Firmware 2.01)

Language: Batchfile - Size: 138 KB - Last synced: about 1 month ago - Pushed: about 1 month ago - Stars: 2 - Forks: 0

Nanich87/ttgo-twatch-ublox-gps-bt

Custom Firmware for TTGO T-Watch 2019 with u-blox NEO-M8N GPS

Language: C++ - Size: 462 KB - Last synced: about 1 month ago - Pushed: about 1 month ago - Stars: 0 - Forks: 0

garzdin/U-blox-SARA-N2-Eagle-Library

This is a repository of the Eagle library for the U-blox SARA N2 NBIoT module

Size: 10.7 KB - Last synced: about 1 month ago - Pushed: over 6 years ago - Stars: 1 - Forks: 2

asv-soft/asv-drones-gbs

A ground base station service with Real-Time Kinematic (RTK) support

Language: C# - Size: 152 KB - Last synced: about 1 month ago - Pushed: about 1 month ago - Stars: 5 - Forks: 0

Kongduino/RAK1910_GPS_UBLOX7-Update

An update to RAK1910_GPS_UBLOX7.ino that fixes missing N/S and E/W markers

Language: C++ - Size: 2.93 KB - Last synced: about 1 month ago - Pushed: over 3 years ago - Stars: 1 - Forks: 0

Kongduino/RAK4631-ublox-Commander

A sketch that not only parses NMEA sentences, but also allows sending UBX commands and decrypt answers from the ublox module

Language: C++ - Size: 7.24 MB - Last synced: about 1 month ago - Pushed: almost 2 years ago - Stars: 2 - Forks: 0

Kongduino/RAK4631_RAK12500_GPS_ZOE-M8Q_I2C_OLED

A sample project using our new RAK12500 GNSS module with an RTC module

Language: C++ - Size: 2.93 KB - Last synced: about 1 month ago - Pushed: almost 3 years ago - Stars: 1 - Forks: 0

Nanich87/ttgo-twatch-ublox-gps-wifi

Custom Firmware for TTGO T-Watch 2019 with u-blox NEO-M8N GPS

Language: C++ - Size: 2.93 KB - Last synced: about 1 month ago - Pushed: about 1 month ago - Stars: 0 - Forks: 0

ethz-asl/ublox_utils

Repository with tools for the ublox RTK receiver.

Language: C++ - Size: 43.9 KB - Last synced: 29 days ago - Pushed: about 1 year ago - Stars: 33 - Forks: 6

BeakeS/TeenyGPSTestbed_C2

Language: C++ - Size: 393 KB - Last synced: about 2 months ago - Pushed: about 2 months ago - Stars: 1 - Forks: 1

BeakeS/TeenyUbloxConnect

Language: C++ - Size: 32.2 KB - Last synced: about 2 months ago - Pushed: about 2 months ago - Stars: 0 - Forks: 0

mlab-modules/GPS02

GPS02B is GNSS reciever ready to RTK (Real time kinematics) technology

Language: HTML - Size: 7.75 MB - Last synced: about 2 months ago - Pushed: about 2 months ago - Stars: 6 - Forks: 8

eagletrt/gpslib

Reading, Parsing and serializing GPS data, both GNSS and UBX messages.

Language: C - Size: 2.84 MB - Last synced: about 2 months ago - Pushed: about 2 months ago - Stars: 3 - Forks: 2

commschamp/cc.ublox.commsdsl

CommsDSL schema-based definition of UBLOX protocol

Language: CMake - Size: 384 KB - Last synced: about 1 month ago - Pushed: about 2 months ago - Stars: 40 - Forks: 10

alkeldi/pyrtkgps

Manage Real-Time Kinematic GPS (RTK-GPS) with Python

Language: Python - Size: 9.77 KB - Last synced: 22 days ago - Pushed: about 2 years ago - Stars: 4 - Forks: 1

tiagofreire-pt/rpi_uputronics_stratum1_chrony

A straightforward and highly optimized approach to achieve a cost-effective Stratum 1 NTP server using a Raspberry Pi 5B and an Uputronics GPS HAT

Language: Shell - Size: 1.64 MB - Last synced: 2 months ago - Pushed: 2 months ago - Stars: 7 - Forks: 1

aussierobots/ublox_dgnss

This usb based ROS2 driver is focused on UBLOX Generation 9 UBX messaging, for a DGNSS rover. High precision data is available.

Language: C++ - Size: 431 KB - Last synced: 2 months ago - Pushed: 2 months ago - Stars: 30 - Forks: 14

BlackbirdHQ/ublox-cellular-rs

A driver crate for the entire u-blox cellular family in Rust

Language: Rust - Size: 712 KB - Last synced: 3 months ago - Pushed: 3 months ago - Stars: 18 - Forks: 10

ublox-rs/tools

Tools to operate U-Blox devices

Language: Rust - Size: 9.77 KB - Last synced: about 1 month ago - Pushed: 3 months ago - Stars: 0 - Forks: 0

PropellerAero/ubxScope 📦

Plot streamed UBX SPAN spectrum data in real-time in-browser

Language: Python - Size: 39.1 KB - Last synced: 4 days ago - Pushed: almost 2 years ago - Stars: 1 - Forks: 1

VimDrones/open-rtk

open source rtk base

Language: JavaScript - Size: 534 KB - Last synced: about 1 month ago - Pushed: about 4 years ago - Stars: 12 - Forks: 3

sparkfun/SparkFun_Ublox_Arduino_Library 📦

Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules

Language: C++ - Size: 1.21 MB - Last synced: about 2 months ago - Pushed: over 3 years ago - Stars: 140 - Forks: 86

Orolia2s/ephemerides

Represent GNSS navigation data as language agnostic yamls

Language: Python - Size: 106 KB - Last synced: 2 months ago - Pushed: 2 months ago - Stars: 0 - Forks: 0

dizcza/neo_m8p_board

ublox GPS NEO-M8P Kicad design files

Size: 868 KB - Last synced: 4 months ago - Pushed: 4 months ago - Stars: 0 - Forks: 0

gokulp01/ros2-ublox-zedf9p

ROS2 drivers for U-blox ZED F9P

Language: C++ - Size: 598 KB - Last synced: 4 months ago - Pushed: 4 months ago - Stars: 14 - Forks: 6

ktuukkan/marine-api

Java Marine API - NMEA 0183 library for Java

Language: Java - Size: 4.96 MB - Last synced: 4 months ago - Pushed: 6 months ago - Stars: 243 - Forks: 141

pilotak/UbxGpsI2C

Ublox GPS I2C async library for mbed

Language: C++ - Size: 106 KB - Last synced: 5 months ago - Pushed: 5 months ago - Stars: 4 - Forks: 0

ldab/Node-RED-Energy-Harvesting-dashboard

Node-RED Energy Harvesting dashboard example, weather forecast, temperature and humidty measurement. MQTT, ESP32, u-blox NINA-W10, HTU21D, IBM Cloud, CloudMQTT

Language: C++ - Size: 5.15 MB - Last synced: 4 months ago - Pushed: almost 5 years ago - Stars: 8 - Forks: 6

sparkfun/SparkFun_u-Blox_NEO_M9N

The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options.

Size: 9.72 MB - Last synced: about 2 months ago - Pushed: about 1 year ago - Stars: 10 - Forks: 2

eclipse-ecal/ecal-gpsd-client

eCAL interface to the linux gps service daemon

Language: C++ - Size: 1.5 MB - Last synced: about 1 month ago - Pushed: over 1 year ago - Stars: 8 - Forks: 4

svetgeorgiev/RevoTor

Empower your autonomous vehicle projects with custom-made flight computers and optimized code. Our DIY solutions offer the flexibility and control you need to take your vehicles to the next level. Visit our Discord Server at https://discord.gg/HCXPvBpP

Language: C++ - Size: 79.1 MB - Last synced: 7 months ago - Pushed: 7 months ago - Stars: 3 - Forks: 0

ThunderFly-aerospace/TFGPS01 Fork of mlab-modules/GPS02

UAV GNSS navigation module with RTK capability.

Language: G-code - Size: 33.2 MB - Last synced: 7 months ago - Pushed: 7 months ago - Stars: 11 - Forks: 6

golukon/Ublox_NEO-MPU6050

Combine MPU6050 and Ublox NEO-M9N in one device

Language: C++ - Size: 0 Bytes - Last synced: 7 months ago - Pushed: 7 months ago - Stars: 0 - Forks: 0

SimpleMethod/STM32-GNSS

STM32 library with DMA support for u-blox devices supporting Global Navigation Satellite Systems and UBX standard. Successfully tested on: NEO-M8, MAX-M8, NEO-M9N

Language: C - Size: 6.38 MB - Last synced: 7 months ago - Pushed: almost 3 years ago - Stars: 50 - Forks: 11

oostern/cracl

C++ library to interface with various uBlox receivers, oscillators, atomic clocks, and time interval counters

Language: C++ - Size: 173 KB - Last synced: 7 months ago - Pushed: almost 4 years ago - Stars: 3 - Forks: 1

AxDen-Dev/CC1312R1_Solar_Power_Asset_Tracker_example_gcc

CC1312R1 Sub-G Solar power asset tracker

Language: C - Size: 6.17 MB - Last synced: 7 months ago - Pushed: over 2 years ago - Stars: 8 - Forks: 2

Gbertaz/GloBoSaT

General Purpose Satellite Tracker

Language: C++ - Size: 12.6 MB - Last synced: 8 months ago - Pushed: over 2 years ago - Stars: 8 - Forks: 0

megasaturnv/arduino-gps-tracker

An Arduino-based GPS tracking solution. Uses one Arduino as the GPS tracker and the other to display the GPS location.

Language: C++ - Size: 9.14 MB - Last synced: 9 months ago - Pushed: almost 6 years ago - Stars: 7 - Forks: 1

lab5e/at

Library for AT command interfaces on IoT devices. For now only Sara N21x (and possibly N31x)

Language: Go - Size: 32.2 KB - Last synced: 9 months ago - Pushed: 9 months ago - Stars: 4 - Forks: 1

balamuruganky/Ublox_Linux_Library

Ublox Linux Library

Language: C++ - Size: 30.3 KB - Last synced: 5 months ago - Pushed: about 2 years ago - Stars: 9 - Forks: 5

bolderflight/ublox

Arduino and CMake library for communicating with uBlox GPS receivers.

Language: C++ - Size: 12.2 MB - Last synced: 10 months ago - Pushed: about 1 year ago - Stars: 96 - Forks: 30

ldab/BLE-node-u-blox

u-blox NINA-B3 BLE node, based on nRF52840 and SHTC3

Language: C - Size: 2.56 MB - Last synced: 10 months ago - Pushed: 10 months ago - Stars: 2 - Forks: 2

mr-ingenious/ArduinoUbxLib

A library for arduino to communicate ublox receivers via the ubx protocol

Language: C++ - Size: 98.6 KB - Last synced: 10 months ago - Pushed: almost 3 years ago - Stars: 2 - Forks: 1

cohaolain/CruiseControl-ESP8266

This is a project I'm working on so I can have cruise control in my car. It uses GPS in order to monitor the speed of your vehicle, and shows your speed on the OLED display. It allows you to set your desired speed limit using two push buttons. If you speed, the device screams - the pitch changing with your speeding.

Language: C++ - Size: 92.8 KB - Last synced: 11 months ago - Pushed: 11 months ago - Stars: 1 - Forks: 1

Nanich87/ublox-zed-f9p-enclosure

Enclosure for u-blox ZED-F9P GNSS module

Size: 174 KB - Last synced: 12 months ago - Pushed: 12 months ago - Stars: 0 - Forks: 0

Huibean/ublox.js

node.js driver for ublox gps

Language: JavaScript - Size: 61.5 KB - Last synced: 13 days ago - Pushed: 11 months ago - Stars: 16 - Forks: 1

walidabazo/NodeMcu-and-GPS

GPS-Tracking-System Ublox NEO-7M (GPS) and NodeMcu

Size: 8.79 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 2 - Forks: 0

acutaia/goeasy-ublox_api

Secure interface to interact with Ublox receiver 🛰

Language: Python - Size: 1.17 MB - Last synced: about 1 year ago - Pushed: about 1 year ago - Stars: 4 - Forks: 1

swisscheese38/rtklawnmower

ROS and GPS RTK based lawn mower

Language: Python - Size: 133 KB - Last synced: about 1 year ago - Pushed: about 1 year ago - Stars: 2 - Forks: 0

arobenko/ublox

C++(11) implementation of all UBX binary protocol messages used by u-blox 4/5/6/7/8 GPS receivers

Size: 1.83 MB - Last synced: about 1 month ago - Pushed: about 4 years ago - Stars: 52 - Forks: 13

Mil1ium/NTRIP_ROS

Recieve RTCM messages from NTRIP caster and get RTK solution for ZED-F9P

Language: Python - Size: 79.1 KB - Last synced: about 1 year ago - Pushed: almost 2 years ago - Stars: 21 - Forks: 4

ldab/u-blox_GNSS

u-blox GNSS receiver library light weight for low power tracking application

Language: C++ - Size: 6.21 MB - Last synced: about 1 year ago - Pushed: about 4 years ago - Stars: 19 - Forks: 3

semuconsulting/esp32-ubx-monitor

Sparkfun UBX GNSS Receiver monitor utility for ESP32 and VSCode / PlatformIO

Language: C++ - Size: 10.7 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 0 - Forks: 0

MuratovAS/gps-ntp-eth-esp32

Simple NTP server with GPS satellites synchronization.

Language: C++ - Size: 128 KB - Last synced: about 1 year ago - Pushed: about 2 years ago - Stars: 3 - Forks: 2

khoih-prog/WiFiManager_Generic_Lite 📦

"Library to configure MultiWiFi/Credentials at runtime for Teensy, SAM DUE, SAMD21, SAMD51, STM32F/L/H/G/WB/MP1, nRF52, RP2040-based (Nano RP2040 Connect, RASPBERRY_PI_PICO), AmebaD RTL8720DN, etc. boards, using Generic WiFi (WiFiNINA, WiFi101, ESP8266-AT, ESP32-AT, etc.) modules/shields. You can also specify DHCP HostName, static AP and STA IP. Use much less memory compared to full-fledge WiFiManager. Config Portal will be auto-adjusted to match the number of dynamic custom parameters. Optional default Credentials to be autoloaded into Config Portal to use or change instead of manually input. Credentials are saved in LittleFS/InternalFS, (emulated-)EEPROM, FlashStorage_SAMD, FlashStorage_STM32, FlashStorage_RTL8720 or DueFlashStorage. New powerful-yet-simple-to-use feature to enable adding dynamic custom parameters from sketch and input using the same Config Portal. DoubleDetectDetector as well as Virtual Switches feature permits entering Config Portal as requested. Now using WiFiMulti_Generic library

Language: C++ - Size: 6.29 MB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 8 - Forks: 2

semuconsulting/esp32-d9s-monitor

Sparkfun NEO-D9S monitor utility for ESP32 and VSCode/PlatformIO

Language: C++ - Size: 10.7 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 0 - Forks: 0

semuconsulting/esp32-f9p-monitor

Sparkfun ZED-F9P monitor utility for ESP32 and VSCode/PlatformIO

Language: C++ - Size: 15.6 KB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 0 - Forks: 0

IgorKilipenko/ublox_esp_ble_uart

For transmit gnss data from ublox board by bluetooth

Language: C++ - Size: 29.3 KB - Last synced: about 1 year ago - Pushed: about 2 years ago - Stars: 3 - Forks: 1

Hameem1/Indoor-Localization-using-CellLocate

Makes use of the CellLocate feature for indoor position estimation without GPS. When GPS is available, the location is calculated using CellLocate and GPS data in a hybrid configuration.

Language: C++ - Size: 6.84 KB - Last synced: about 1 year ago - Pushed: over 5 years ago - Stars: 3 - Forks: 1

ahmtcn123/Rust-NMEA

Rust NMEA parser

Language: Rust - Size: 37.1 KB - Last synced: about 22 hours ago - Pushed: 6 months ago - Stars: 1 - Forks: 0

firecrestHorizon/RPi4-Ubuntu22.04Srvr-Headless--uBloxGPS_RTC

RPi4 Headless build running Ubuntu Server with GPS/RTC

Language: Swift - Size: 3.12 MB - Last synced: about 1 year ago - Pushed: almost 2 years ago - Stars: 1 - Forks: 0

MrCerealKiller/ros_f9p_driver

ROS driver for u-blox ZED-F9P GNSS System based on NMEA Messages 🌎

Language: Python - Size: 2.51 MB - Last synced: about 1 year ago - Pushed: over 4 years ago - Stars: 8 - Forks: 2

KiwiBryn/RAKWisBlock-NetNF

Series of projects for exploring running the .NET nanoFramework on RAK WisBlock devices

Language: C# - Size: 6.5 MB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 0 - Forks: 0

IgorKilipenko/m8t-tcp-receiver

Control UBLOX GPS receiver via ESP32

Language: C++ - Size: 1.12 MB - Last synced: about 1 year ago - Pushed: over 4 years ago - Stars: 3 - Forks: 1

IgorKilipenko/ublox_gui_flutter

ublox_gui_flutter

Language: C - Size: 772 KB - Last synced: about 1 year ago - Pushed: about 2 years ago - Stars: 3 - Forks: 1

phlegx/gnss

GNSS library for Ublox C030-412m board with ZOE-M8B chip.

Language: C++ - Size: 41 KB - Last synced: about 1 year ago - Pushed: about 2 years ago - Stars: 2 - Forks: 1

IgorKilipenko/ubx_esp_core

Language: C++ - Size: 188 KB - Last synced: about 1 year ago - Pushed: over 4 years ago - Stars: 1 - Forks: 0

halmaia/SimpleUBGNSS

Simple, experimental UBX reader for u-blox GNSS. Under construction.

Language: C# - Size: 24.4 KB - Last synced: over 1 year ago - Pushed: over 2 years ago - Stars: 1 - Forks: 0

DamenShipyards/sensor_hub

Sensor logging service application

Language: C++ - Size: 21.5 MB - Last synced: about 1 year ago - Pushed: over 1 year ago - Stars: 2 - Forks: 2

mnltake/readF9P_UBX

python module for decode UBX mesage

Language: Python - Size: 18.6 KB - Last synced: about 1 year ago - Pushed: over 2 years ago - Stars: 3 - Forks: 1

PowerBroker2/NEO-6M_GPS

Arduino driver library for extracting data from a NEO-6M GPS over serial

Language: C++ - Size: 2.79 MB - Last synced: about 1 year ago - Pushed: about 4 years ago - Stars: 8 - Forks: 5

ke0ff/GPSDO-II

Ublox GPS carrier and GPSDO

Language: C - Size: 228 KB - Last synced: 12 months ago - Pushed: over 2 years ago - Stars: 0 - Forks: 1

mathisloge/device-tester_o

device / protocol / gps / gnss tester

Language: C++ - Size: 9.71 MB - Last synced: about 1 year ago - Pushed: about 3 years ago - Stars: 3 - Forks: 0

neggles/mpcie-lea-m8t

Language: Makefile - Size: 2.63 MB - Last synced: about 1 year ago - Pushed: over 3 years ago - Stars: 1 - Forks: 0

acutaia/goeasy-ublox_reader

Receiver of U-Blox messages from Galileo satellite 🛰

Language: Python - Size: 963 KB - Last synced: about 1 year ago - Pushed: almost 3 years ago - Stars: 0 - Forks: 1

hugonugraM/tiny-gps-u8

the tiny-gps library for working with U8 / UBX-m8030 gps devices with arduino,

Language: C++ - Size: 7.81 KB - Last synced: about 1 year ago - Pushed: over 5 years ago - Stars: 1 - Forks: 0

ricardofalcao/ublox-driver-example-stm32

Example of the UBlox driver using a STM32 microcontroller

Language: C++ - Size: 494 KB - Last synced: about 1 year ago - Pushed: about 3 years ago - Stars: 0 - Forks: 3

ricardofalcao/ublox-driver

Driver for UBlox GNSS modules, compatible with NMEA and UBX protocols

Language: C - Size: 53.7 KB - Last synced: about 1 year ago - Pushed: about 3 years ago - Stars: 1 - Forks: 1

JayKickliter/ublox

u-blox message types

Language: Rust - Size: 78.1 KB - Last synced: about 1 year ago - Pushed: about 4 years ago - Stars: 0 - Forks: 0

ldab/Arduino-u-blox-NINA-B1

u-blox NINA-B1 Arduino example + SHT31 temperature and humidity + Bluetooth BLE

Language: C++ - Size: 29.3 KB - Last synced: about 1 year ago - Pushed: about 5 years ago - Stars: 3 - Forks: 0

sparkfun/Qwiic_GPS_Clock_Project

Qwiic-enabled GPS Clock with the ability to adjust the UTC for your timezone, daylight savings time, 12hr/24hr format, and digital/analog mode depending on your display.

Language: C++ - Size: 14.6 KB - Last synced: about 2 months ago - Pushed: over 3 years ago - Stars: 0 - Forks: 0

pilotak/mbed-cellular-boilerplate

Mbed uBlox cellular basic with reconnect

Language: C++ - Size: 21.5 KB - Last synced: over 1 year ago - Pushed: over 3 years ago - Stars: 1 - Forks: 0

paulvha/sodaq

Different programs for SODAQ AFF/SARA

Language: C++ - Size: 2.23 MB - Last synced: about 1 year ago - Pushed: over 3 years ago - Stars: 0 - Forks: 0

jklein131/MKRGSM_Contacts

A collection of functions to interface with the ARDUINO MKR GSM 1400 Sim card phonebook/contact memory.

Language: C++ - Size: 35.2 KB - Last synced: about 1 year ago - Pushed: almost 6 years ago - Stars: 1 - Forks: 0

dl3yc/uglide Fork of thasti/utrak

software for a glider as balloon payload

Language: Eagle - Size: 2.88 MB - Last synced: 10 months ago - Pushed: almost 7 years ago - Stars: 0 - Forks: 0